Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: batzner_com_PT221LLabel.asp

                                                                                                       System
Pyrethroid Food Wood
Equipment Handling Injection

PRESCRIPTION TREATMENT brand

221L
Residual Insecticide
KILLS:
Ants, Booklice, Boxelder Bugs, Carpenter Ants, Carpenter Bees, Centipedes, Chocolate Moths, Clover Mites, Cluster Flies, Cockroaches, Crickets, Dermestids, Drug Store
Beetles, Earwigs, Elmleaf Beetles, Fire Ants, Flour Beetles, Grain Weevils, Millipedes, Scorpions, Silverfish, Sowbugs, Spiders, Springtails, Above-Ground Termites, Ticks,
Trogoderma (Cabinet, Khapra and Warehouse Beetles), Wood Infesting Borers and Beetles, and Wood Wasps.
FOR USE IN AND AROUND:
Apartments, Campgrounds, Food Storage Areas, Homes, Hospitals, Hotels, Meat Packing and Food Processing Plants, Motels, Nursing Homes, Resorts, Restaurants and
other Food Handling Establishments, Schools, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains, Trucks, Planes鈥?), Utilities, Warehouses and other
Commercial and Industrial Buildings. Use in cargo areas only. Do not use in aircraft cabins.
鈥?




ACTIVE INGREDIENTS:
位-Cyhalothrin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99.95%
Contains Petroleum Distillates. TOTAL: 100.00%
EPA Reg. No. 499-473
KEEP OUT OF REACH OF CHILDREN
CAUTION
See side panel for additional precautionary statements.

PRECAUTIONARY STATEMENTS DIRECTIONS FOR USE
NOTE TO PHYSICIAN: No specific antidote is available.
Treat the patient symptomatically. Contains petroleum IT IS A VIOLATION OF FEDERAL LAW TO USE
FIRST AID THIS PRODUCT IN A MANNER
distillate - vomiting may cause aspiration pneumonia.
INCONSISTENT WITH ITS LABELING.
IF SWALLOWED: Immediately call a poison control
HAZARDS TO HUMANS
center or doctor. Do not induce vomiting unless told to Do not apply this product in hospital patient rooms while
AND DOMESTIC ANIMALS occupied or in any rooms occupied by the elderly or infirm.
do so by a poison control center or doctor. Do not give
Do not apply to classrooms when in use. Do not apply to
ANY liquid to the person. Do not give anything by mouth CAUTION: Harmful if swallowed. Causes moderate eye irri-
institutions (including libraries, sport facilities, etc.) in the
to an unconscious person. tation. Avoid contact with eyes or clothing. Wash thorough- immediate area when occupants are present.
ly with soap and water after handling.
IF IN EYES: Hold eye open and rinse slowly and gently
HOW TO USE THE WHITMIRE MICRO-GEN CRACK
for 15-20 minutes. Remove contact lenses, if present,
ENVIRONMENTAL HAZARDS & CREVICE庐 INJECTION SYSTEM
after the first 5 minutes, then continue rinsing eye. Call a
This product is toxic to fish, birds and other wildlife. Do not CRACK & CREVICE TREATMENT: Use Whitmire Micro-
poison control center or doctor for treatment advice.
Gen PT 庐 221L with the supplied actuator and injection
apply directly to water or to areas where surface water is pre-
IF ON SKIN OR CLOTHING: Take off contaminated
tubes or other Whitmire Micro-Gen equipment. Inject PT
sent or to intertidal areas below the mean high water mark.
clothing. Rinse skin immediately with plenty of water for 221L into cracks and crevices or void spaces where insects
Do not contaminate water by cleaning of equipment or dis-
15-20 minutes. Call a poison control center or doctor for may be harboring, living and breeding. Place injector tip into
posal of equipment washwaters. Apply this product only as
treatment advice. cracks, crevices, holes and other small openings. Release
specified on the label. Spray will damage plant foliage. approximately one second of product. For light infestations
IF INHALED: Move person to fresh air. If person is not
move injector tip along cracks while treating at the rate of
breathing, call 911 or an ambulance, then give artificial PHYSICAL OR CHEMICAL HAZARDS
three linear feet per second. For heavy infestations move
respiration, preferably mouth-to-mouth if possible. Call Flammable. Contents under pressure. Keep away from injector tip along at one linear foot per second. For closed
a poison control center or doctor for treatment advice. voids calculate the void's cubic area and treat at the rate of
heat, sparks and open flame. Do not puncture or incinerate
one to five seconds per three cubic feet. Several holes may
Have the product container or label with you when call- container. Exposure to temperatures above 130掳F may
be required in long-running voids.
ing a poison control center or doctor, or going for treat- cause bursting. Do not spray on plastic, painted, or var-
SPOT TREATMENT: Use PT 221L with the supplied actu-
ment. You may also contact 1-800-225-3320 for emer- nished surfaces. Do not spray directly into any electronic
ator and injection tubes or other Whitmire Micro-Gen equip-
gency medical treatment information. equipment such as radios, televisions, computers, etc.



WHITMIRE MICRO-GEN
RESEARCH LABORATORIES, INC.

NOTE: This specimen label is for informational purposes only. All uses may not be approved in all states. See labeling which accompanied product for Directions
for Use or call 800-777-8570 for more information.
PT庐 221L Residual Insecticide

Do not apply directly to food. Care should be taken to avoid
ment. Hold container upright while spraying. Direct nozzle FOR ACTIVE AND HIBERNATING STAGES OF BOX-
depositing the product onto exposed surfaces or introduc- ELDER BUGS, ELMLEAF BEETLES, CLUSTER FLIES
approximately 12 inches from surface to be treated. Apply
ing the material into the air. Avoid contamination of food, AND CLOVER MITES: Inject cracks and crevices and/or
directly on insects in these locations when possible.
food utensils or food processing surfaces. Food must be voids where these insects may be harboring or hibernating.
covered or removed in areas being treated. Spray should
INDOOR TREATMENTS Infested areas include, but are not limited to, cracks and
not be applied directly to surfaces or utensils that may come crevices, behind siding, wall voids, around window and
CRAWLING INSECTS (Cockroaches, Dermestids, into contact with food. Food contact surfaces and equip- door frames.
Scorpions, Spiders, Earwigs, Crickets, Sowbugs, ment must be cleaned with an effective cleaning compound
OUTDOOR TREATMENTS
Millipedes, Centipedes): Apply as a Crack & Crevice and rinsed with potable water before using.
treatment using the prescribed dosage into cracks and SUBTERRANEAN ANTS SUCH AS ARGENTINE
Reapplication may be made at 21 day intervals. Limit indi-
crevices and void spaces where insects may be harboring. ANTS, FIRE ANTS, AND HARVESTER ANTS: To treat
vidual spot treatments to an area no larger than 20% of the
These may include, but are not limited to, openings around nests, inject the nest at 3-6 sites at a rate of 5-10 seconds
treated surface. Individual spot treatments should not
per site. For very large nests (over 12" diameter), increase
pipes and sinks, under refrigerators, behind baseboards, exceed two square feet.
the number of injection sites. Space injection sites in a cir-
washing machines, stoves, cabinets, sewer, floor drains FOOD AREAS: Food areas include areas for receiving,
cular pattern on the nest surface with one site in the center.
and meter boxes. Spot treatments may also be made to storage, packing (canning, bottling, wrapping, boxing),
To quiet active ants on nest surface, sweep surface with
areas including, but not limited to, storage areas, closets, preparing, edible waste storage and enclosed process-
spray from a distance of 12 inches. For best results, apply
around water pipes, doors and windows, around refrigera- ing systems (mills, dairies, edible oils, syrups). Serving
when temperature is 65-85掳F, or in early morning or late
areas (when food is exposed and facility is in operation)
tors, cabinets, sinks, stoves and other equipment, shelves,
evening hours. Treat new nests as they appear.
is also considered a food area.
drawers and similar areas.
PERIMETER TREATMENT: For crawling insects, apply
Apply as a Crack & Crevice treatment or Spot treatment
TICKS: Apply as a Crack & Crevice treatment or Spot as a Crack & Crevice treatment or Spot treatment into
directly into cracks, crevices, voids or onto surfaces
treatment into infested and egg laying sites near pet cracks and crevices where insects may enter premises or
where insects are resting. Use an injection tube or other
resting areas including, but not limited, to cracks and harbor. Areas to be treated include, but are not limited to,
Whitmire Micro-Gen equipment capable of delivering a
crevices, behind baseboards, door and window frames. weep holes, under siding, wall voids, soffits, around attic
pinstream. Apply to different elements of construction,
Do not use on pets. vents, cracks and crevices, openings around windows,
between equipment and floor, openings leading to hol-
doors and pipes, and landscape timbers. Treatment of
low spaces in walls, equipment legs and bases, and
BOOKLICE & SILVERFISH: Apply as a Crack & Crevice
infested fences and tree holes is permitted.
where insects hide or rest.
treatment into cracks and crevices of baseboards, door
TERMITES AND CARPENTER ANTS LIVING INSIDE
frames, bookcases and other harborage sites. Spot treat- FOOD SERVING AREAS (facilities where foods are
TREES: Determine the highest and lowest elevation of the
served, such as dining rooms): Apply as a Crack &
ments may also be made to areas including, but not limited
colony. Drill holes into colony at highest elevation and inject
Crevice treatment or Spot treatment to selective surfaces such
to, storage areas, closets, around water pipes, doors and
5 to 10 seconds. Do the same for lowest elevation. Drill
as baseboards, under elements of construction and into
windows, around refrigerators, cabinets, sinks, stoves and
intermediate holes every four feet between the upper and
cracks and crevices. Avoid treating surfaces likely to be con-
other equipment, shelves, drawers and similar areas.
lower elevations if required.
tacted by food. Food should be covered or removed in area
ANTS: Apply as a Crack & Crevice treatment into cracks, being treated. Do not apply directly to food or allow applica- AERIAL TERMITE CARTON IN TREES: Drill or punch
crevices and voids where ants may be traveling and/or har- tions to contaminate food. hole into center of carton. Inject for 5 to 10 seconds. If car-
boring, including, but not limited to, around doors, win- NON-FOOD AREAS: Includes areas such as garbage ton is greater than 12 inches across, open another injection
dow frames, wall voids and other structural cracks and rooms, lavatories, floor drains (to sewers), entries and site. Inject for 5 to 10 seconds. Make one additional injec-
crevices. Spot treatments may also be made to areas vestibules, offices, locker rooms, machine rooms, boiler tion site for each 12 inches of carton.
including, but not limited to, storage areas, closets, around rooms, garages, mop closets and storage areas (after can- TERMITES AND CARPENTER ANTS IN STUMPS,
water pipes, doors and windows, around refrigerators, cab- ning or bottling). UTILITY POLES AND FENCES: Treat open holes or drill
inets, sinks, stoves and other equipment, shelves, drawers Apply as a Crack & Crevice treatment or Spot teatment to horizontal holes in a circular pattern where insects are sus-
and similar areas. selective surfaces such as baseboards, under elements of pected. Inject 2 to 5 seconds of product per hole.
construction, into cracks and crevices. Avoid treating sur-
GRAIN WEEVILS, FLOUR BEETLES, CHOCOLATE TREATMENT FOR IN-GROUND SERVICE BOXES:
faces likely to be contacted by food.
MOTHS, DRUGSTORE BEETLES, TROGODERMAS Ants, Centipedes, Clover Mites, Cockroaches, Crickets,
(IN EXPOSED ADULT AND LARVAL STAGES) AND Earwigs, Fire Ants, Millipedes, Scorpions, Silverfish,
INDOOR AND OUTDOOR TREATMENTS
HIBERNATING STAGES OF BOXELDER BUGS, ELM- Sowbugs, Spiders (such as Black Widow and Brown
WOOD DESTROYING INSECTS - Localized treat-
LEAF BEETLES, CLUSTER FLIES AND CLOVER Recluse), Springtails. Use spray actuator to treat open boxes
ment of wood-infesting insects including Beetles and exposed surfaces. Do not contact any electrical wiring or
MITES: Inject cracks and crevices and/or voids where these
and Borers (such as the following families: mechanical parts of meter.
insects may be harboring or hibernating. Infested areas Anobiidae, Bostrichidae, Buprestidae, Ceram-
include, but are not limited to, cracks and crevices in cabi- bycidae, Lyctidae, Oedemeridae, Sesiidae),
nets and pantries, wall voids, around window and door STORAGE AND DISPOSAL
Carpenter Ants, Carpenter Bees, Termites and
frames, under siding and in machinery. Spot treatments may Wood Wasps: Locate suspected infestation and/or insect
Do not contaminate water, food or feed by storage or
also be made to areas including, but not limited to, storage tunnels and cavities. Drill pilot holes into insect tunnels,
disposal.
areas, closets, around water pipes, doors and windows, galleries and inaccessible closed voids. Drill holes 8 to 10
STORAGE: Store in a cool dry area away from heat or
inches apart to ensure thorough coverage. Inject 5 to 10
around refrigerators, cabinets, sinks, stoves and other
open flame and inaccessible to children.
seconds per hole. Do not contact electrical wiring, plumb-
equipment, shelves, drawers and similar areas.
PESTICIDE DISPOSAL: Wastes resulting from use of
ing, etc. when drilling and never use Whitmire Micro-Gen
this product may be disposed of on site or at an approved
APPLICATIONS IN FOOD HANDLING metal wood injectors where electrical shock could occur.
Use a Whitmire Micro-Gen standard plastic void injector if waste disposal facility.
ESTABLISHMENTS
there is danger of electrical contact. For carpenter bees, seal CONTAINER DISPOSAL: Do not puncture or inciner-
Food Handling Establishments are places other than bee entrances after application. This treatment is intended ate! Empty container by using the product in accordance
for localized termite infestations only. For severe infesta-
private residences in which food is held, processed, with the label directions. Offer empty container for recy-
tions or treatments under slabs, in basements and build-
prepared or served. cling, if available, or place in trash if allowed by state and
ings with insufficient crawl space, contact a licensed pest local regulations. If container is partly full, contact your
In Federally inspected meat and poultry plants, the facil- control operator or termite service. Not recommended as local solid waste agency or call 1-800-CLEANUP for dis-
ity must not be in operation when this product is used, sole protection against termites. The purpose of treatments posal instructions.
regardless of the method of application. In non-Federally with this product is to kill workers or winged forms which
inspected facilities, Spot and/or Crack and Crevice appli- may be present in the treated galleries at the time of treat-
Contains no CFCs or other ozone depleting
cation may be used while the facility is in operation pro- ment. Such applications are not a substitute for mechanical
substances. Federal regulations prohibit CFC
alteration, soil treatment or foundation treatment but mere-
vided exposed food is covered or removed from the area
propellants in aerosols.
ly a supplement.
being treated prior to application.

A Prescription Treatment庐 brand insecticide from:
Whitmire Micro-Gen Research Laboratories, Inc.
3568 Tree Court Industrial Blvd.
St. Louis MO 63122-6682
漏 2005 Whitmire Micro-Gen Research Laboratories, Inc.


NOTE: This specimen label is for informational purposes only. All uses may not be approved in all states. See labeling which accompanied product for Directions
for Use or call 800-777-8570 for more information. 050110-41

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
67-68-5.asp 67-68-5
arrowchemicalproducts_com_350_msds.asp N/A
7664-41-7.asp 7664-41-7 61790-12-3 8002-09-3
asms_com_au_air_cooled_blast_furnace_slag.asp N/A
35312-61-3.asp 35312-61-3
1996-08-2.asp 1996-08-2 2003-01-0
122-14-5.asp 122-14-5
108-95-2.asp 108-95-2 67-56-1 64-17-5
74-98-6.asp 74-98-6 106-97-8
141-43-5.asp 141-43-5 10043-35-3 68391-01-5 7173-51-5 7440-50-8
austubemills_com_msdsview.aspSynonym_Galtube.asp N/A
64742-54-7.asp 64742-54-7 68649-12-7 16958-92-2 72030-25-2 9002-84-0 64742-52-5
68513-65-5.asp 68513-65-5 74-84-0 75-28-5 74-98-6 115-07-1
autolaundrysystems_com_Foamy_Antibacterial_Hand_Soap.asp N/A
avogadro_chem_iastate_edu_GlueWhit.asp N/A
1333-74-0.asp 1333-74-0
7783-06-4.asp 7783-06-4
10102-43-9.asp 10102-43-9
74-98-6.asp 74-98-6
03-12-9.asp 03-12-9 7732-18-5 9004-83-5 75-21-8 123-91-1
03-12-9.asp 03-12-9 26628-22-8 67-68-5 9037-22-3 1185-53-1 7732-18-5
74-82-8.asp 74-82-8 1333-74-0 7727-37-9
7727-37-9.asp 7727-37-9
7439-97-6.asp 7439-97-6
04-12-0.asp 04-12-0 1344-28-1
badgerminingcorp_com_March12007SilicaSandMSDSRevE.asp N/A
8052-41-3.asp 8052-41-3 107-21-1
batzner_com_PT221LLabel.asp N/A
125-02-0.asp 125-02-0 7732-18-5
1405-41-0.asp 1405-41-0 7732-18-5
3063-94-3.asp 3063-94-3 17096-07-0 19875-51-9 70877-62-2 79-41-4 13050-09-0 131-54-4 2035-72-5
67-63-0.asp 67-63-0
5742-19-8.asp 5742-19-8 111-42-2
136426-54-5.asp 136426-54-5
26225-79-6.asp 26225-79-6
178928-70-6.asp 178928-70-6 118134-30-8
39148-24-8.asp 39148-24-8 27458-92-0
1309-37-1.asp 1309-37-1 1333-86-4 7439-96-5 7440-21-3 7440-02-0 7440-50-8 7440-47-3 7439-98-7 1314-62-1
50-00-0.asp 50-00-0
26628-22-8.asp 26628-22-8 107091-89-4
67-68-5.asp 67-68-5
bdbiosciences_com_BioCoat_Fibronectin_Coated_InsertsMSDSUSAUSA.asp N/A
100-51-6.asp 100-51-6 34590-94-8 67-68-5
1309-37-1.asp 1309-37-1
beckmancoulter_com_IM3614AA.asp N/A
beckman_com_472050.asp N/A
15663-27-1.asp 15663-27-1 7647-14-5 7732-18-5
68-12-2.asp 68-12-2 7722-84-1 7664-38-2 9002-93-1 127087-87-0 67-42-5 329-98-6
000057-55-6.asp 000057-55-6 025155-30-0 005064-31-3 004004-82-4
benmanind_com_3021106Bagbox.asp N/A


HBCChem,Inc

Chemical Information Net chemcas.orgCopyright Reserved

Trading Lead

Leputech HPLC Laboratory