M. S. D. S.
Material Safety Data Sheet
EXS-60 B PLAIN, ACTIVATOR
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME : EXS-60 B PLAIN, ACTIVATOR
IDENTIFICATION NUMBER: EXS-60 B PLAIN
HEALTH : DANGER/CORROSIVE HMIS/NFPA : H3F1R0
Mirage Architectural Products, LLC
346 South Mountainway Drive
Orem, UT 84058
EMERGENCY:800-424-9300 (ChemTrec)
24 Hours Emergency Hotline
INFORMATION: John Horne. PHONE: 801 225 7960 PREPARE DATE: 12/20/06
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
WT/WT %
ITEM -------------- CHEMICAL NAME --------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 PROPRIETARY PROPRIETARY 95.0 %
(Trace contaminant toluene# @<10ppm, ethanol 0.5%)
02 PROPRIETARY PROPRIETARY 10.0 %
(As tin STEL 0.2 mg/m3)
EXPOSURE LIMITS
----- ACGIH ---- ----- OSHA ----- VP TOXICITY
TLV-TWA TLV-TWA PEL-TWA PEL-TWA mmHg LD50 LC50
ITEM ppm Mg/M3 ppm Mg/M3 @68F g/kg ppm
---------------------------------------------------------------------------
01 dna dna dna dna N.A. 1.700 dna
02 dna 0.10 dna 0.10(S) N.A. dna dna
REGULATORY: + Pigment content is dependent on color. #CALIF.TITLE 26:22-12000 (PROP 65).
WARNING: This product contains a chemical known to the State of California to cause birth
defects or other reproductive harm. All ingredients are on TSCA inventory or are exempt.
Toxic chemicals marked (SARA, CERCLA, HAPs) are subject to reporting requirements of SARA
(40CFR 355 and 372), CERCLA (40CFR 302), or HAPs (40CFR 63).
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
(S)=Skin; LD50=Dermal.rabbit; LC50=Inhalation,rat; dna=data not available; na=not
applicable
SECTION 3 - HAZARDS IDENTIFICATION
EXPOSURE EFFECTS: Vapor or spray mist or spattered material can be harmful. Irritating to
eyes, skin, and if inhaled; to nose and throat. Excessive or prolonged inhalation can cause
headache, nausea or dizziness.
OVER-EXPOSURE (prolonged or repeated use): CAN AGGRAVATE OR ACCENTUATE ANY OF THESE
EFFECTS.
SKIN: Burns. Sensitization or allergic reaction, such as rash or hives. Can be absorbed
through skin.
INHALATION: Irritant.
EYES: Severe irritant. Corneal injury. Irreversible burns and damage.
INGESTION: Can be fatal if swallowed. Aspiration into lungs can damage lungs and cause
chemical pneumonia. Can cause burns.
TARGET ORGANS: Kidneys. Liver. Skin. Eyes. Stomach.
MEDICAL CONDITIONS AGGRAVATED: Kidneys. Liver. Skin. Eyes.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INHALATION INGESTION EYE
CONTACT
SECTION 4 - FIRST AID MEASURES
FIRST AID PROCEDURES: INHALATION: Remove to fresh air. Restore normal breathing. Treat
symptomatically. See physician. SKIN: Wash thoroughly with soap and water. Remove
contaminated clothing. Consult physician if irritation persists. EYES: Flush immediately
with plenty of water for at least 15 minutes and get medical attention. INGESTION: Drink 1
or 2 glasses of water to dilute. Never give anything by mouth to an unconscious person.
Do not induce vomiting. Consult physician or poison control center IMMEDIATELY. Treat
symptomatically.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: 205 F (SETA) LOWER EXPLOSIVE LIMIT: N.A.
UPPER EXPLOSIVE LIMIT: N.A.
SECTION 5 - FIRE FIGHTING MEASURES
FLAMMABILITY - OSHA: COMBUSTIBLE - CLASS IIIB
DOT: NOT REGULATED
EXTINGUISHING MEDIA: FOAM CO2 DRY CHEMICAL
LOWEST FLASHING SOLVENT:
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may explode when exposed to extreme
heat and pressure buildup.
FIREFIGHTING PROCEDURES: Wear full protective equipment, self-contained breathing
apparatus. Water may be used to cool closed containers to prevent pressure build-up or
explosion when exposed to extreme heat.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL, LEAKS: Ventilate area. Use inert, absorbent cleanup materials. (DO NOT use
sawdust.) Place in separate container. Keep out of sewers and waterways. If entry is
threatened or occurs, notify local authorities.
SECTION 7 - HANDLING AND STORAGE
HANDLING AND STORAGE: Keep container closed, upright when not in use. Store in cool, dry,
well-ventilated area. Avoid prolonged storage temperatures above 100F. Use caution when
pouring. Avoid breathing sanding dust. Do not weld or flame cut on empty container.
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION: Implement administrative and engineering controls to reduce exposure.
Provide sufficient ventilation in volume and pattern to keep air contaminant concentrations
below the TLV limits. Remove welding or flame cutting decomposition products; follow
current, ANSI Z49.1,"Safety in Welding and Cutting". Refer to 29 CFR parts 1910 and 1915,
for coating operations; part 1910.146, Confined Spaces.
RESPIRATORY PROTECTION: Wear NIOSH/MSHA certified respirator designed to remove a
combination of particulates (dust or spray mist) and vapor. When brushing, rolling or
spreading; select the appropriate respiratory protection for the conditions. For specific
conditions, refer to current "NIOSH Pocket Guide to Chemical Hazards". In confined or
restricted ventilation areas use air-line respirators or hoods. Refer to 29 CFR, OSHA
parts 1910.134 and 1915 for coating operations; part 1910.146 Confined Spaces; ANSI
Z88.2,Practices for Respiratory Protection; 42 CFR, part 84 Particulate Respirators.
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
PROTECTIVE CLOTHING AND EQUIPMENT: Dependent upon application method, wear resistant
coveralls, gloves and shoe coverings to prevent skin contact. Wear solvent resistant
glasses with splash guards or face shield to protect eyes from splash, spatter and/or spray
mist. Consult 29 CFR 1910.132, 133, 136, 138; ANSI Z87.1, Z41.
HYGIENIC PRACTICES: Wash thoroughly after handling and before eating, smoking or using
toilet. Launder contaminated clothing before use.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE : 212 - 212 F VAPOR DENSITY : Is heavier than air
ODOR : NA WEIGHT PER GAL : 8.0352
APPEARANCE : LIQUID EVAPORATION RATE: Is slower than Butyl
SOLUBILITY IN H2O : NO Acetate
EPA MIXED VOC, G/L: 120 EPA MIXED THIN VOC, G/L : 204
THINNER : 900 @ 1.0 pints PHOTOCHEMICALLY REACTIVE: No
VOLATILE VOLUME % : 0.00
SECTION 10 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Heat, open flame, arc or sparks. Water or moisture. High
temperatures.
INCOMPATIBILITY: Strong oxidizers, acids and alkalies. Water.
HAZARDOUS DECOMPOSITION PRODUCTS: (BY FIRE, BURNING OR WELDING); CO, CO2. NOx. Silicon
oxide fumes. Toxic gases or fumes. Formaldehyde at temperatures above 300F (150C). Tin
compound fumes.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
SECTION 11 - TOXICOLOGICAL PROPERTIES
TOXICOLOGICAL PROPERTIES: See Section 2.
SECTION 12 - ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13 - DISPOSAL CONSIDERATIONS
EPA Waste No.: None
DISPOSAL METHOD: Place in separate, appropriate, closed container in accordance with all
applicable local, State, and Federal regulations. This material has NOT been tested by
Toxicity Characteristic Leaching Procedure (TCLP).
SECTION 14 - TRANSPORTATION INFORMATION
DOT PROPER SHIPPING NAME: Paint
DOT HAZARD CLASS: 8 HAZARD SUBCLASS: NA
DOT UN/NA NUMBER: 3066 IMO: NA PACKING GROUP : II
SECTION 15 - REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five components in this
product:
----------- CHEMICAL NAME ----------- CAS NUMBER
WATER 7732-18-5
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product
Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16 - OTHER INFORMATION
NOTICE: Removal of old lead paint by sanding, scraping or other means may
generate dust or fumes that contain lead. Exposure to lead dust or fumes
may cause adverse health effects, especially in children or pregnant women.
Controlling exposure to lead or other hazardous substances requires the use
of proper protective equipment, such as a properly fitted respirator (NIOSH
approved) and proper containment and cleanup. For additional information,
contact the USEPA/Lead Information Hotline at 1-800-424-LEAD.
|