CHEMSKINGLOVE
Product Name
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Supplier Name HEINEMANN ELECTRIC PTY LTD
Address 821 Springvale Road, Mulgrave, Victoria, AUSTRALIA, 3170
(03) 9590 3500
Telephone
Fax (03) 9562 0420
Emergency (03) 9590 3500
sales@heinelec.com.au
Email
Web Site http://www.heinemannelectric.com.au
Synonym(s) SC-SG250 - PRODUCT CODE
Use(s) AEROSOL DISPENSED ?BARRIER SPRAY ?HAND PROTECTANT
MSDS Date 08 Dec 2006
2. HAZARDS IDENTIFICATION
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO ASCC CRITERIA
CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
UN No. 1950 DG Class 2.1 Subsidiary Risk(s) None Allocated
Packing Group None Allocated Hazchem Code 2Y EPG 2D1
3. COMPOSITION/ INFORMATION ON INGREDIENTS
Ingredient Formula CAS No. Content
LIQUEFIED PETROLEUM GAS (LPG) C3H8/C3H6/C4H10 68476-85-7 30-60%
GLYCEROL (GLYCERINE) C3-H8-O3 56-81-5 >5%
SILICONE Not Available 63148-53-8 <4%
STEARIC ACID C18-H36-O2 57-11-4 <4%
COCONUT FATTY ACID Not Available 68647-53-0 <2%
ALLANTOIN C4-H6-N4-O3 97-59-6 <1%
PERFUME Not Available Not Available <1%
Page 1 of 5
RMT
Reviewed: 01 Jan 2007
Printed: 27 Feb 2009
CHEMSKINGLOVE
Product Name
4. FIRST AID MEASURES
Eye If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to
stop by the Poisons Information Centre or a doctor, or for at least 15 minutes.
Inhalation If inhaled, remove from contaminated area. To protect rescuer, use a Type A (Organic vapour) respirator or Air-
line respirator (in poorly ventilated areas). Apply artificial respiration if not breathing.
Skin If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.
Ingestion For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed,
do not induce vomiting. Ingestion is considered unlikely due to product form.
Advice to Doctor Treat symptomatically
First Aid Facilities Eye wash facilities and safety shower are recommended.
5. FIRE FIGHTING MEASURES
Flammability Combustible. May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition.
Fire and Evacuate area and contact emergency services. Toxic gases may be evolved in a fire situation. Remain upwind
and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing
Explosion
Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas.
Extinguishing Dry agent, carbon dioxide or foam. Prevent contamination of drains or waterways.
Hazchem Code 2Y
6. ACCIDENTAL RELEASE MEASURES
Spillage If cans are punctured (bulk), use personal protective equipment. Clear area of all unprotected personnel. Ventilate
area where possible. Collect and allow to discharge outdoors. Contain spillage, then cover / absorb spill with non-
combustible absorbant material (vermiculite, sand, or similar), collect and place in suitable containers for disposal.
7. STORAGE AND HANDLING
Storage Store out of direct sunlight and out of the reach of children, in a cool, dry, well ventilated area, removed from
oxidising agents (eg. hypochlorites), acids (sulphuric acid), heat sources and foodstuffs. Ensure containers are
adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should
have appropriate ventilation systems.
Handling Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin
contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,
drinking and smoking in contaminated areas.
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
Exposure Stds TWA STEL
Ingredient Reference
ppm mg/m3 ppm mg/m3
Glycerin mist (a) ASCC (AUS) -- 10 -- --
LIQUEFIED PETROLEUM GAS ASCC (AUS) 1000 1800 1000 1800
(LPG)
Biological Limits No biological limit allocated.
Engineering Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is
Controls recommended. Maintain vapour levels below the recommended exposure standard.
PPE Wear splash-proof goggles and safety glasses. With prolonged use, wear: PVC or rubber gloves and coveralls.
Page 2 of 5
RMT
Reviewed: 01 Jan 2007
Printed: 27 Feb 2009
CHEMSKINGLOVE
Product Name
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance WHITE LIQUID (AEROSOL DISPENSED) Solubility (Water) INSOLUBLE
Odour FRAGRANT ODOUR Specific Gravity NOT AVAILABLE
pH 7.0 % Volatiles NOT AVAILABLE
Vapour Pressure NOT AVAILABLE Flammability COMBUSTIBLE
Vapour Density NOT AVAILABLE Flash Point > 100癈
Boiling Point NOT AVAILABLE Upper Explosion Limit NOT AVAILABLE
Melting Point NOT AVAILABLE Lower Explosion Limit NOT AVAILABLE
Evaporation Rate NOT AVAILABLE
10. STABILITY AND REACTIVITY
Material to Avoid Incompatible with oxidising agents (eg. hypochlorites), acids (eg. nitric acid), heat and ignition sources.
Hazardous May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition.
Decomposition Products
11. TOXICOLOGICAL INFORMATION
Health Hazard Low to moderate toxicity - irritant. This product may only have the potential to cause adverse health effects if
intentionally misused (eg. deliberately inhaling contents). Over exposure may result in adverse effects to the
Summary
central nervous system. Use safe work practices to avoid eye or skin contact and vapour inhalation.
Eye Irritant. Contact may result in irritation, lacrimation, pain and redness.
Inhalation Irritant. Over exposure may result in irritation of the nose and throat, coughing and headache. High level exposure
may result in nausea, dizziness and drowsiness.
Skin Irritant. Contact may result in drying and defatting of the skin, rash and dermatitis.
Ingestion Low to moderate toxicity. Ingestion may result in nausea, vomiting, abdominal pain and drowsiness with large
quantities. Aspiration may result in chemical pneumonitis and pulmonary oedema. Ingestion is considered unlikely
due to product form.
Toxicity Data GLYCEROL (GLYCERINE) (56-81-5)
LD50 (Ingestion): 4090 mg/kg (mouse)
LD50 (Intraperitoneal): 4420 mg/kg (rat)
LD50 (Intravenous): 4250 mg/kg (mouse)
LD50 (Subcutaneous): 91 mg/kg (mouse)
TDLo (Ingestion): 1428 mg/kg (human)
STEARIC ACID (57-11-4)
LD50 (Intravenous): 23 mg/kg (mouse)
LD50 (Skin): > 5 g/kg (rabbit)
LDLo (Ingestion): 4640 mg/kg (rat)
12. ECOLOGICAL INFORMATION
Environment Limited ecotoxicity data was available for this product at the time this report was prepared. Ensure appropriate
measures are taken to prevent this product from entering the environment.
13. DISPOSAL CONSIDERATIONS
Waste Disposal For small amounts absorb contents with sand or similar and dispose of to an approved landfill site. Do not
puncture or incinerate aerosol cans. Contact the manufacturer for additional information.
Legislation Dispose of in accordance with relevant local legislation.
14. TRANSPORT INFORMATION
Page 3 of 5
RMT
Reviewed: 01 Jan 2007
Printed: 27 Feb 2009
CHEMSKINGLOVE
Product Name
CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
Shipping Name AEROSOLS
UN No. 1950 DG Class 2.1 Subsidiary Risk(s) None Allocated
Packing Group None Allocated Hazchem Code 2Y EPG 2D1
15. REGULATORY INFORMATION
Poison Schedule A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform
Scheduling of Drugs and Poisons (SUSDP).
AICS All chemicals listed on the Australian Inventory of Chemical Substances (AICS).
16. OTHER INFORMATION
Additional AEROSOL CANS may explode at temperatures approaching 50癈.
Information
SYNERGISM - ANTAGONISM: Ingredients in this product may act together to aggravate or reduce adverse
effects. Accordingly the time weighted average concentration (TWA) provided for single ingredients should be
considered as a guide only and all due care exercised when handling.
RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid
exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken.
Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air
powered or air supplied respirators should be considered where prolonged or repeated use is necessary.
ABBREVIATIONS:
ADB - Air-Dry Basis.
BEI - Biological Exposure Indice(s)
CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.
CNS - Central Nervous System.
EINECS - European INventory of Existing Commercial chemical Substances.
IARC - International Agency for Research on Cancer.
M - moles per litre, a unit of concentration.
mg/m3 - Milligrams per cubic metre.
NOS - Not Otherwise Specified.
NTP - National Toxicology Program.
OSHA - Occupational Safety and Health Administration.
pH - relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline).
ppm - Parts Per Million.
RTECS - Registry of Toxic Effects of Chemical Substances.
TWA/ES - Time Weighted Average or Exposure Standard.
HEALTH EFFECTS FROM EXPOSURE:
It should be noted that the effects from exposure to this product will depend on several factors including: frequency
and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of
application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible
scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:
The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only.
Factors such as method of application, working environment, quantity used, product concentration and the
availability of engineering controls should be considered before final selection of personal protective equipment is
made.
COLOUR RATING SYSTEM: RMT has assigned all Chem Alert reports a colour rating of Green, Amber or Red for
the sole purpose of providing users with a quick and easy means of determining the hazardous nature of a
product. Safe handling recommendations are provided in all Chem Alert reports so as to clearly identify how users
Page 4 of 5
RMT
Reviewed: 01 Jan 2007
Printed: 27 Feb 2009
CHEMSKINGLOVE
Product Name
can control the hazards and thereby reduce the risk (or likelihood) of adverse effects. As a general guideline, a
Green colour rating indicates a low hazard, an Amber colour rating indicates a moderate hazard and a Red colour
rating indicates a high hazard.
While all due care has been taken by RMT in the preparation of the Colour Rating System, it is intended as a
guide only and RMT does not provide any warranty in relation to the accuracy of the Colour Rating System. As far
as is lawfully possible, RMT accepts no liability or responsibility whatsoever for the actions or omissions of any
person in reliance on the Colour Rating System.
Report Status This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the
manufacturer's Material Safety Data Sheet ('MSDS').
It is based on information concerning the product which has been provided to RMT by the manufacturer or
obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate
safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of
the product should be obtained directly from the manufacturer.
While RMT has taken all due care to include accurate and up-to-date information in this MSDS, it does not provide
any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss,
injury or damage (including consequential loss) which may be suffered or incurred by any person as a
consequence of their reliance on the information contained in this MSDS.
Prepared By Risk Management Technologies
5 Ventnor Ave, West Perth
Western Australia 6005
Phone: +61 8 9322 1711
Fax: +61 8 9322 1794
Email: info@rmt.com.au
Web: www.rmt.com.au
MSDS Date: 08 Dec 2006
End of Report
Page 5 of 5
RMT
Reviewed: 01 Jan 2007
Printed: 27 Feb 2009
|