NFPA Rating
Fire
1 HMIS Rating
Health Reactivity
0
2 HEALTH 2
Special
1
FLAMMABILITY
Hazard
0
PHYSICAL HAZARD
Renew by QC PERSONAL PROTECTION E
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 1 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
1. SUBSTANCE/PREPARATION AND COMPANY IDENTIFICATION:
Company: 24-Hour Emergency Response Information
QC Construction Products CHEMTREC: 800.424.9300
232 S. Schnoor Ave Madera, CA 93637
800.453.8213
Chemical Name: Mixture (see section 2)
Chemical Family: Water-based polymers (family only)
Chemical Formula: Proprietary Mixture
Synonyms: Unspecified
2. COMPOSITION/INFORMATION ON INGREDIENTS:
CAS NO. Chemical Name %
25085-99-8 Polymer <50%
Proprietary Polyamine Polymer <8%
9002-93-1 Polyethlene Glycol <8%
N/A Polysiloxane >2%
Proprietary Pigment 1-70%
1333-86-4 Carbon Black <40%
13463-67-7 Titanium Dioxide <60%
3. HAZARD IDENTIFICATION:
Emergency overview:
Severe eye and skin irritant. Risk of serious eye damage. May cause mild nose, throat or lung irritation.
May cause sensitization by skin contact.
Use local exhaust ventilation.
Wear appropriate dust respirator.
Wear chemical safety goggles.
Wear chemical-resistant gloves and protective clothing.
Potential health effects:
Primary Routes of Entry-
Solids and liquids: Eye and skin contact, and ingestion.
Gases: Inhalation.
Liquefied gases: Eye contact.
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 2 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
4. FIRST-AID MEASURES:
General advice:
Remove contaminated clothing. Seek medical advice.
If in eyes:
Do not rub eyes. Remove contact lenses. Rinse eyes with large amounts of water for 20 minutes. Get
medical attention if irritation persists.
If on skin:
Rinse with water then wash with soap and water. Get medical attention if irritation persists.
If inhaled:
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get
immediate medical attention.
If swallowed:
Do not induce vomiting. Turn victim's head to the side. Drink lukewarm water and get medical attention.
Note to physician:
Application of corticosteroid cream has been effective in treating skin irritation.
5. FIRE-FIGHTING MEASURES:
Flash point:
240 ?- 251 癋 (116 ?- 122 癈) TCC/PM; Closed Cup: 525 癋 (274 癈).
LEL:
Not established.
UEL:
Not established.
Suitable extinguishing media:
Dry extinguishing media, CO2, foam.
Hazards during fire-fighting:
May generate toxic gases or irritant fumes. Use of water may result in the formation of toxic aqueous
solutions.
Protective equipment for fire-fighting:
Wear turnout gear and a NIOSH-approved self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES:
Personal precautions:
Use recommended personal protective clothing and equipment. Evacuate personnel to safe areas.
Environmental precautions:
Control runoff and isolate discharge material for proper waste disposal method. Do not let product enter
drains or water sources.
Cleanup:
Absorb with inert dry absorbent. Use non-leaking containers, seal tightly and label properly. Place in
appropriate chemical waste container.
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 3 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
7. HANDLING and STORAGE:
Handling:
General advice-
Use recommended protective clothing/equipment. Do not ingest or breathe gas/fumes/vapor/spray. Do not
cut, drill, grind, or weld on or near this container. Keep away from heat and sources of ignition.
Storage:
General advice-
Store in tightly closed, properly vented containers away from direct sunlight, heat, sparks, open flames and
strong oxidizing agents. Do not allow product to freeze.
8. EXPOSURE CONTROLS and PERSONAL PROTECTION:
Advice on system design:
Provide local exhaust ventilation to control vapors/mist.
Personal protective equipment (HMIS rating `E'):
Eye protection: Chemical safety goggles.
Skin protection: Chemical-resistant gloves. Wear protective clothing to minimize skin contact.
Respiratory protection: Wear appropriate dust respirator.
General safety and hygiene measures: Handle in accordance with good industrial hygiene and
safety practices. Due to the coloring properties of the product, closed work clothes should be
worn to avoid stains during installation. Wash soiled clothing before reuse.
Other protective measures:
Nearby running water is necessary on the jobsite should an accident occur.
9. PHYSICAL and CHEMICAL PROPERTIES:
Form: Liquid/Solid
Odor: Mild/Sweet
Color: Slight
pH value: 7-9
Water content: <90%
Total solids/Non-volatiles: 11%
Total VOC: 12 g/l
Solvents by weight: N/A
Specific gravity: Heavier than water
Freezing/Melting point: Unspecified (do not allow product to freeze)
Boiling point: 212 ?- 518 癋 (100 ?- 270 癈)
Density: Heavier than air
Solubility in water: Soluble
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 4 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
10. STABILITY and REACTIVITY:
Conditions to avoid:
Do not allow product to freeze. Keep away from heat or sources of ignition.
Substances to avoid:
Water-reactive chemicals, oxidizing agents, reducing agents, organic and mineral acids, peroxides or other
catalysts. Incompatible with bases.
Hazardous reactions:
May generate toxic gases or irritant fumes.
Decomposition products:
Carbon Dioxide, Carbon Monoxide, nitrogen compounds, halogenated compounds, or metal oxide fumes.
Corrosion to metals:
No corrosive effect on metal.
11. TOXICOLOGY INFORMATION:
Acute Toxicity:
Mild irritant.
Oral:
Irritant.
Eye irritation:
Irritant
Skin irritation:
Mild irritant.
Inhalation:
Skin: By contact.
Sensitization:
Respiratory: Not established.
Chronic Toxicity:
May cause adverse reproductive effects.
Other information:
May affect genetic material.
12. ECOLOGICAL INFORMATION:
Biodegredation:
Test method: Unspecified
Analysis method: Unspecified
Degree of elimination: Unspecified
Environmental toxicity:
Acute and prolonged toxicity to fish: Unspecified
Toxicity to microorganisms: Unspecified
Other ecotoxicological advice: Unspecified
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 5 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
13. DISPOSAL CONSIDERATIONS:
Waste disposal of substance:
Use non-leaking containers, seal tightly and label properly. Dispose of in accordance with local, state and
federal regulations. It is the waste generator's responsibility to determine if a particular waste is hazardous
under RCRA (EPA regulations for hazardous waste).
Container disposal:
Dispose of in a licensed facility. Recommend crushing, puncturing or other means to prevent unauthorized
use of used containers.
Other:
Do not dispose of product in streams, wells, sewers, lakes, rivers or oceans.
RCRA:
None.
14. TRANSPORTATION INFORMATION:
Land transportation:
US DOT Shipping Class: Class 55 Non-Hazardous
US Highway & Rail Shipments: 49 CFR Subchapter C
Sea transportation:
IMDG: Unspecified
Air transportation:
IATA/ICAO: Unspecified
15. REGULATORY INFORMATION:
Federal Regulations:
Registration status:
TSCA, US Unspecified
OSHA hazard category: 29 CFR 1910.1200 and related appendices (unprotected contact)
SARA hazard category (EPCRA 311/312/313):
Unspecified
CAS Number: Chemical Name:
25085-99-8 Polymer
Proprietary Polyamine Polymer
9002-93-1 Polyethlene Glycol
N/A Polysiloxane
Proprietary Pigment
1333-86-4 Carbon Black
13463-67-7 Titanium Dioxide
Material Safety Data Sheet
Renew by QC: Solid Color Stain Kit
Revision Date: 070208 Page No.: 6 of 6
Version: 1 File Name: Renew by QC-SolidColorStain0708
16. OTHER INFORMATION:
NFPA Rating:
Health: 2 Fire: 1
Reactivity: 0 Special Hazard: none
HMIS III Rating:
Health: 2 Flammability: 1
Physical Hazard: 0 Personal Protection: E (chemical safety glasses, chemical-resistant gloves
and appropriate dust respirator.)
Both NFPA and HMIS III rating systems use a numbering scale that ranges from 0 to 4 to indicate the degree of
hazard. A value of zero means the substance possesses no hazard while a value of four indicates high hazard.
HMIS III personal protection ratings A-K are specified by HMIS, while ratings L-Z are specified by this manufacturer-
please review section 8 for specific safety equipment recommended for use with this product.
Reason for Revision:
New product, new document.
Reviewed:
070208--draft
Local Contact Information:
QC Construction Products
800.453.8213 (5 a.m. to 5 p.m., M-F, PST)
qc@qcconprod.com ?www.qcconstructionproducts.com
24-Hour Emergency Response Information:
CHEMTREC: 800.424.9300
Notice: While the descriptions, designs, data and information contained herein are presented in good faith and
believed to be accurate, it is provided for user guidance only. Many factors may affect processing or application/use,
QC Construction Products recommends user-tests to determine suitability for a particular purpose, prior to use.
In no case shall descriptions, designs, data or information provided be considered a part of the terms or conditions
of sale. Further, the user expressly understands and agrees that QC assumes no obligation or liability for the
descriptions, designs, data or information given or results obtained as all such being given and accepted at users
own risk.
Warranty: This product is warranted to be of uniform quality within manufacturing tolerances. Since control is not
exercised over its use, no warranty, expressed or implied, is made as to the effects of such use. Seller's and manu-
facturer's obligation under this warranty shall be limited to refunding the purchase price of that portion of the material
proven to be defective. The user assumes all other risks and liabilities resulting from use of this product. If you have
any questions, please contact QC CONSTRUCTION PRODUCTS.
END OF DATA SHEET
|