Epoxy.com
20774 West Pennsylvania Ave
Dunnellon, FL 34431
Phone 352-489-1666
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
Epoxy.com PRODUCT #20 "B" Comp.
IDENTITY:
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number: 800-663-8253
20774 West Pennsylvania Ave. Telephone Number: 352-489-1666
Address:
12/2008
Dunnellon, FL 34431 Date Prepared:
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL ACHIH TLV Hazard Limits
%
Aliphatic Mercaptan N/D
Polymercaptan N/D
10mg/m3
Wollastonite 13463-67-7
10mg/m3
Silicon Dioxide 112945-52-5
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/D Specific Gravity (H20 =1): 1.7
Vapor Pressure (mm Hg.): N/D Melting Point: N/A
Vapor Density (AIR = 1): N/D Evaporation Rate: N/D
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: Black paste, strong skunk-like odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): > 200 F Flammable Limits: N/D LEL UEL
Extinguishing Media: Water spray, dry chemical, CO2
Special Fire Fighting Procedures: Protective clothing and self-contained respiratory protection should be worn
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: Avoid contact w/strong, oxidants, epoxy resins and
amine mixtures, especially when hot
Incompatibility: Contact with large masses of epoxy resins generates large quantities of heat due to exothermic
reaction
Hazardous Decomposition or Byproducts: Carbon monoxide, carbon dioxide, oxides of nitrogen and sulfur on
burning
Hazardous Polymerization: Will not occur Conditions to Avoid:
(OVER)
Epoxy.com PRODUCT #20 "B" cont
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes
Health Hazards (Acute and Chronic): Mild irritant, index 1.6/8 (rabbit) moderate eye irritant, index 27/100 (rabbit)
Carcinogenicity: NTP? N/L IARC Monographs? N/L OSHA Regulated? N/L
Signs and Symptoms of Exposure: Irritation of skin, eyes, and respiratory tract; slight narcotic effect
Medical Conditions Generally Aggravated by Exposure: May cause lung injury and chemical pneumonia,
irritation of respiratory tract, possible allergen, slightly toxic.
Emergency and First Aid Procedures: Flush with large amounts of water for 15 minutes, wash skin with soap and
water; remove contaminated clothing; seek fresh air source or have qualified personnel administer oxygen; induce
vomiting
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Stop source leaks, cover spill with alcohol foam,
soap up spill w/absorbent or sand, neutralize spilled residue w/potassium permaganate; after (1) hour, soap up with
absorbent or sand; avoid breathing vapors; avoid contact with skin, eyes, and clothes.
Waste Disposal Method: Place material in an approved, closed container, label and dispose of in accordance with
Federal, State and local regulations concerning health and pollution. Spilled material that cannot be re-used may be
disposed of via incineration or approved chemical waste landfill if regulations permit.
Precautions to Be Taken in Handling and Storing: Wear respirator, rubber gloves, protective clothing; avoid
moisture contamination, cover containers, upon freezing allow material reach room temperature prior to mixing
Other Precautions: Do not store near epoxy resins. Keep container closed.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: NIOSH-approved industrial canister type gas mask with organic vapor cartridge
respirator
Ventilation: Mechanical (General) : Local Exhaust
Protective Gloves: Neoprene Rubber Eye Protection: Chemical splash goggles
Other Protective Clothing or Equipment: Hard hats, rubber boots
Work/Hygienic Practices: Adequate ventilation, dispose of contaminated footwear
N/A = Not Applicable N/D = Not Determined N/E = Not Established
Epoxy.com
20774 West Pennsylvania Ave.
Dunnellon, FL 34431
Phone 352-489-1666
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
Epoxy.com PRODUCT #20 "A" Component
IDENTITY:
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number: 800-633-8253
20774 West Pennylvania Ave.
Address: Telep 352-489-1666
12/2008
Dunnellon, FL 34431 Date Prepared:
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL ACHIH TLV Hazard Limits
%
Epoxy Resin 028064-14-4 N/D
10mg/m3
Titanium Dioxide 13463-67-7
10mg/m3
Wollastonite 13983-17-0
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: >475 F Specific Gravity (H20 =1): 1.85
Vapor Pressure (mm Hg.): N/D Melting Point: N/D
Vapor Density (AIR = 1): N/D Evaporation Rate: N/D
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: White past, mild either-like odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 424 F ?ASTM D 93-85 PMCC Flammable Limits: LEL N/A UEL N/D
Extinguishing Media: Foam, dry chemical, CO2, alcohol-resistant foam
Special Fire Fighting Procedures: Wear positive pressure, self-contained breathing apparatus
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: Excessive heating over long periods of time
degrades resin
Incompatibility: acids, bases, amines
Hazardous Decomposition or Byproducts: By-products of incomplete pyrolysis or combustion are phenolics,
carbon monoxide, water
Hazardous Polymerization: Will not occur Conditions to Avoid: N/A
(OVER)
EPOXYSYSTEMS' PRODUCT #20 "A" cont
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Unlikely Skin? Yes Ingestion? Yes LD for rate > 400 mg/kg
Health Hazards (Acute and Chronic): Material unlikely absorbed through skin in harmful amounts (LD 50 not
determined( Can Cause allergic skin response
Carcinogenicity: NTP? N/D IARC Monographs? N/D OSHA Regulated? N/D
Signs and Symptoms of Exposure: Irritation of skin, may cause slight transient (temporary) eye irritation
Medical Conditions Generally Aggravated by Exposure: Slight skin, eye irritation, breathing difficulties if
exposed to high temperature or fire.
Emergency and First Aid Procedures: Irrigate eyes for 5 minutes, wash off in soap and water; remove to fresh air,
induce vomiting.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: .Soak up in absorbent material residue may be
cleaned up with steam and soapy water; use of solvent should be avoided; keep spark-producing equipment away;
for large spills, evacuate and keep up-wind of spills; contain with dike.
Waste Disposal Method: Resins can be disposed of through burning in an adequate incinerator or burying in a
landfill, in accordance with Federal State and local regulations.
Precautions to Be Taken in Handling and Storing: Wear proper protective gear; gloves, safety glasses. Store in
cool area.
Other Precautions: Avoid breathing vapors of heated materials.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: None needed at room temperature, higher temperatures may generate irritating vapors.
Ventilation: Mechanical (General) : good general ventilation
Protective Gloves: Rubber gloves Eye Protection: Safety glasses
Other Protective Clothing or Equipment: None
Work/Hygienic Practices: Wash hands after contact; follow practices of good industrial hygiene
N/A = Not Applicable N/D = Not Determined N/E = Not Established
|