341 Christian Street, Oxford, CT 06478 USA
Tel: (203) 267-6061 Fax: (203) 267-6065
www.naturalsourcing.com info@naturalsourcing.com
MATERIAL SAFETY DATA SHEET
MSDS
FRAGRANCE OIL
PAPAYA
1. PRODUCT NAME AND COMPANY IDENTIFICATION
Product Name: FRAGRANCE OIL ?PAPAYA
Product ID: 2056483
Product Use: Personal Care Formulations
Company Name: Natural Sourcing
Company Address: 341 Christian Street, Oxford, CT 06478, USA
Date Issued: 03/25/09
Emergency Telephone Number: Chemtrec Tel: (800) 262-8200
2. COMPOSITION/INGREDIENT INFORMATION
Chemical Identity:
Composition & Hazardous The identity of individual components of this mixture if
Components: proprietary information and is regarded to be a trade secret.
This mixture contains no suspected carcinogens as reported by
NTP, ACGIH, OSHA or IARC at 0.1% or greater. One or more of
the components present in greater than 1% concentration may
present the following health effects based on evaluation of the
individual components:
May cause eye, skin or respiratory irritation.
The above effects are based on evaluation of individual
components and the relevancy to the mixture as a whole or to
humans is unknown. Excessive exposure may cause similar
effects.
In humans, one or more of the individual components may
cause the following health effects:
May be irritating to eyes and skin.
3. HAZARDS IDENTIFICATION
Routes of Entry: ? Eyes
? Skin
? Ingestion
? Inhalation
Eye Contact: Direct contact may cause irritation
Skin Contact: Direct contact may cause irritation
Ingestion: May be harmful if swallowed
Inhalation: Breathing concentrated vapors may cause respiratory irritation.
Page 1 of 4
4. FIRST AID MEASURES
Eyes: ?Remove lenses if applicable.
?Flush with plenty of water or eye wash solution for 15
minutes.
? Get medical attention if irritation persists.
Skin: ? Wash with soap and water
? Get medical attention if irritation occurs.
Ingestion: ?If swallowed, immediately dilute with two 8 ounce glasses of
water or milk.
?Seek medical attention immediately.
Inhalation: ?Remove to fresh air.
?If breathing is stopped or irregular, administer artificial
respiration and oxygen. Seek medical attention.
Medical Conditions Generally None
Aggravated by Exposure:
5. FIRE FIGHTING MEASURES
Flash Point (Method Used): >200癈
Flammable Limits LEL: Not Established
UEL: Not Established
Auto Ignition Temperature: No information
Hazardous Combustion Products: No information
Conditions Under Which Flammability No information
Could Occur:
Extinguishing Media: ?Dry Chemical
?Carbon Dioxide
?Foam
Note: Do not use water except to cool containers exposed to
fire.
Special Firefighting Procedures: ?Use self contained breathing apparatus.
?Protective clothing.
Unusual Fire & Explosion Hazards: None found
6. ACCIDENTAL RELEASE MEASURES (STEPS FOR SPILLS)
Personal Protection: N/A
Environmental Protection: Notify authorities if large amounts of product enters sewer.
Methods for Cleaning Up: ?Absorb onto an inert, absorbent substrate and sweep up.
?Wash area with soap and water. Area may be slippery; take
precautions.
7. HANDLING AND STORAGE
Handling
Safe Handling: ?Wear safety glasses.
?Keep away from oxidizing agents, excessive heat and
sources of ignition.
Storage
Requirements for Storage Areas and ?Store in a cool, dry location, in a sealed container in a well
Containers: ventilated area.
Page 2 of 4
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Engineering Controls: Eye wash stations and safety showers should be easily
accessible.
Personal Protection
Eye: Safety glasses, splash goggles or face shield should be worn.
Skin/Body: Lab coats and chemical resistant gloves should be worn.
Respiratory: Not needed under normal conditions of use in well ventilated
areas. Use NIOSH-approved respiratory devices if ventilation is
not adequate.
Ventilation: Handle in well ventilated areas.
Other: Evaluate need based on application. Slip proof shoes may be
worn where spills may occur.
Work/Hygiene Practice: Normal work and hygiene practices for handling chemicals.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: Clear to Yellow
Odor: Characteristic
Specific Gravity (H2O = 1): --
Acid Value: (% oleic) --
Vapor Pressure (mm Hg.): --
Vapor Density (AIR = 1): --
Flash Point: >200?C
Boiling Point: --
Melting Point: --
Evaporation Rate: --
Solubility in Water: Insoluble
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions
Conditions to Avoid: Sources of ignition, open flames, excessive heat or cold
Incompatibility (Materials to Avoid): No information
Hazardous Decomposition or No information
Byproducts:
Hazardous Polymerization: Will Not Occur
11. TOXICOLOGICAL INFORMATION
Signs and Symptoms of Exposure: May be irritating to eyes, skin, mucous membranes and
respiratory system.
Effects of Overexposure: None currently known
Threshold Limit Value: Not established
Medical Conditions Generally None
Aggravated by Exposure:
Irritancy: Skin: Potential Irritant
Eyes: Potential Irritant
Carcinogenicity: None
Page 3 of 4
Reproductive Toxicity: N/A
Teratogenicity: N/A
Mutagenicity: N/A
Name of toxicologically synergistic N/A
products:
12. ECOLOGICAL INFORMATION
Ecological Information: No information
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods: Used containers may contain flammable or combustible
residue. Dispose of according to local, state and federal
regulations. Do not put into sewer lines.
14. TRANSPORT INFORMATION
DOT Classification: Not regulated
Class/Division: Not restricted
Proper Shipping Name: NA
Label: None
Packing Group: NA
ID Number: NA
Hazard: NA
15. REGULATORY INFORMATION
HMIS: Health: 1 Flammability: 1 Reactivity: 0 Personal Protection: C
The components of this product are found in the TSCA inventory.
The components of this product are found in the DSL-NDSL.
16. ADDITIONAL INFORMATION
Superfund Amendments And Reauthorization Act (SARA) Title III Notice:
Components present in this product at a level, which could require reporting under the statute are:
PHENOXY ETHYL ISOBUTYRATE (Phenirat) CAS No: 103-60-6 Conc: 2.7%
This information is provided for documentation purposes only.
The complete range of conditions or methods of use are beyond our control therefore we do not assume
any responsibility and expressly disclaim any liability for any use of this product. Information contained
herein is believed to be true and accurate however, all statements or suggestions are made without
warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the
use of the material or the results to be obtained from the use thereof. Compliance with all applicable
federal, state, and local laws and local regulations remains the responsibility of the user.
This safety sheet cannot cover all possible situations which the user may experience during processing.
Each aspect of your operation should be examined to determine if, or where, additional precautions may
be necessary. All health and safety information contained in this bulletin should be provided to your
employees or customers.
Page 4 of 4
|