MATERIAL SAFETY DATA SHEET
ZAK FUEL INDUCTION CLEANER
PRODUCT CODE: FM620
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: ZAK Fuel Induction Cleaner
Synonyms: None
Supplier: ZAK Products, 720 Industrial Blvd. #400, Grapevine, TX 76051
Emergency Telephone (24 hr.): CHEMTREC 1-800-424-9300
Information Telephone: ZAK Products 1-800-514-6011 During normal business hours CST 817-645-6088
Date Printed: 09/15/2003
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient/CAS No. wt. % OSHA PEL OSHA PEL ACGIH TLV ACGIH TLW
TWA Ceiling Limits TWA STEL
Xylene 58-62 100 ppm Not Known 100 ppm 150 ppm
1330-20-7
Glycol Ether PM 15-25 100 ppm 150 ppm 100 ppm 150 ppm
107-98-2
N-methyl pyrrolidone 8-12 None Established None Established None Established None Established
872-50-4
Hydrotreated light distillates 0-2.5 None Established None Established None Established None Established
64742-47-8
Stoddard Solvent 0-2.5 500 ppm None Established 100 ppm None Established
8052-41-3
3. HAZARDS IDENTIFICATION
Emergency Overview: Harmful or fatal if swallowed. Harmful if inhaled. Harmful if absorbed through the skin. May cause irritation to skin and
eyes. May irritate the lungs. Affects central nervous system.
4. FIRST AID MEASURES
Eye Contact: In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention immediately after flushing.
Ingestion: DO NOT INDUCE VOMITING. Give nothing by mouth. Get medical attention! If vomiting occurs, keep head lower than
hips to prevent aspiration.
Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult
give oxygen. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. Get medical attention.
5. FIRE FIGHTING MEASURES
Flammable Properties
Flash Point 癋(癈): 79F (lowest component)
Flash Point Method: TAG Closed Cup
Flammable Limits in Air - Lower (%): NT
Flammable Limits in Air - Upper (%): Not Determined
Autoignition Temperature 癋(癈): Not Determined
Extinguishing Media: Carbon dioxide. Dry chemical. Alcohol foam.
Protection Of Fire-Fighters:
Special Fire-Fighting Procedures: Wear approved positive-pressure self-contained breathing apparatus and protective clothing. Vapor
may cause flash fire. Cool container with water spray.
Hazardous Combustion Products: Carbon Dioxide. Carbon Monoxide. Fumes and Smoke. Oxides of Nitrogen.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate protective clothing and equipment to prevent skin and eye contact.
Spill Procedures: Wear protective equipment specified. Only trained and qulified personel should handle any spilled or leaked product.
Avoid all sources of ignition; heat, sparks and open flames. Ventilate spill area. Soak up material with absorbent and
place in chemical waste container. Use non-sparking tools and equipment.
Increase area ventilation. Remove sources of ignition. Wear proper protective equipment as specified in the protective
equipment section. Use non-sparking tools and equipment. Isolate hazard area, keeping unnecessary and unprotected
personnel from entering.
Environmental Precautions: Keep away from drains.
7. HANDLING AND STORAGE
Handling and Use ground strap. Avoid contact with skin and eyes. Use only in a well ventilated area. Warning: Flammable. Do not inhale vapors.
Storage: Keep away from heat and open flame. Avoid excessive storage temperature
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Product Name: ZAK Fuel Induction Cleaner
Product Code: FM620
Date Printed: 09/15/2003
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: Exhaust ventilation.
Eyes: Wear safety glasses or goggles to protect against exposure.
Skin Protection: Use chemical resistant gloves for prolonged skin contact.
Respiratory Protection: Use in a well ventilated area. Use approved NIOSH respiratory protection if TLV exceeded..... Or over exposure
is likely.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid
Odor: Not Determined pH Value: Not Determined
Vapor Pressure: Not Determined Vapor Density (Air=1): Not Determined
Boiling Point (癋): 136F Melting/Freezing Point: Not determined.
Solubility in Water: APPRECIABLE Bulk Density at 20癈: Not Determined
Molecular Weight: Not Determined Evaporation Rate: Not Determined
Viscosity: Not determined. Specific Gravity (H20=1): Not determined.
VOC Content(%): 100 Decomposition Temperature: Not Known
10. STABILITY AND REACTIVITY
Chemical Stability: STABLE.
Conditions to Avoid: Keep away from heat,sparks and flame. Extreme heat. Avoid contact with heat, sparks, open flame, and
static discharge.
Materials to Avoid: Contact with oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide. Carbon dioxide. Oxides of nitrogen. Smoke and Fumes.
Hazardous Polymerization: WILL NOT OCCUR
11. TOXICOLOGICAL INFORMATION
Xylene 58-62 Gruop 3 (not classifiable) Not Listed Not Listed
1330-20-7
Glycol Ether PM 15-25 Not Listed Not Listed Not Listed
107-98-2
N-methyl pyrrolidone 8-12 Not Listed Not Listed Not Listed
872-50-4
Hydrotreated light distillates 0-2.5 Not Listed Not Listed Not Listed
64742-47-8
Stoddard Solvent 0-2.5 Not Listed Not Listed Not Listed
8052-41-3
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Product Name: ZAK Fuel Induction Cleaner
Product Code: FM620
Date Printed: 09/15/2003
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATION
Waste Classification: Not determined.
Waste Management: Not determined.
Disposal should be made in accordance with federal, state and local regulations.
14. TRANSPORTATION INFORMATION
U.S. DOT:
Proper Shipping Name: ORM-D CONSUMER COMMODITY
Hazard Class: ORM-D
UN/NA Number: Not Applicable
DOT Packing Group: Not Applicable
IMDG:
Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
Hazard Subclass: not determined
UN No.: UN 1993
Packing Group: II
Marine Pollutant: Not determined.
15. REGULATORY INFORMATION
US Federal Regulations:
Ingredient/CAS No. wt. % SARA 313 SARA 302 RQ TPQ
Xylene 58-62 Listed Not Listed 100 NA
1330-20-7
Glycol Ether PM 15-25 Not Listed Not Listed NA NA
107-98-2
N-methyl pyrrolidone 8-12 Listed Not Listed NA NA
872-50-4
Hydrotreated light distillates 0-2.5 Not Listed Not Listed NA NA
64742-47-8
Stoddard Solvent 0-2.5 Not Listed Not Listed NA NA
8052-41-3
SARA 311/312 Hazard Catagories: Not Determined.
State Regulations:
Ingredient/CAS No. wt. % California Prop. 65 California Prop. 65 California Prop. 65 California Prop. 65
Cancer list Developmental Reproductive Female Reproductive Male
Toxicity
Xylene 58-62 Not Listed Not Listed Not Listed Not Listed
1330-20-7
Glycol Ether PM 15-25 Not Listed Not Listed Not Listed Not Listed
107-98-2
N-methyl pyrrolidone 8-12 Not Listed Listed (June 15, 2001) Not Listed Not Listed
872-50-4
Hydrotreated light distillates 0-2.5 Not Listed Not Listed Not Listed Not Listed
64742-47-8
Stoddard Solvent 0-2.5 Not Listed Not Listed Not Listed Not Listed
8052-41-3
U.S. TSCA: The components of this product are listed on the TSCA Inventory.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Product Name: ZAK Fuel Induction Cleaner
Product Code: FM620
Date Printed: 09/15/2003
16. OTHER INFORMATION
General Notes: Do not allow undiluted material or large quantities to reach groundwater, bodies of water or sewer system.
Disclaimer:
The information and recommendations contained herein are based upon tests believed to be reliable. However, the manufacturer/distributor of this
product does not guarantee their accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER
EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS
FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage may be required. The manufacturer/distributor assumes no
responsibility for results obtained or for incidental or consequential damages, including lost profits, arising from the use of these data. No warranty
against infringement of any patent, copyright or trademark is made or implied.