MATERIAL SAFETY DATA SHEET
ChemCo Systems, Inc., 2800 Bay Road, Redwood City, CA 94063
Prepared by Dept. of Safety, Phone: 650/261-3790
24 Hour Emergency Phone: 800/424-9300 CHEMTREC
1. PRODUCT NAME: Ingestion: Intake can cause gastrointestinal irritation,
nausea, vomiting, diarrhea, headache and
KEMKO?036, Marine Structure Coat, Part B drowsiness. Can result in burns of mouth
esophagus and stomach. Moderately toxic.
Chemical Family: Polyamines
LD 50 CAS 9046-10-0 1080 mg/kg (rat)
2. HAZARDOUS INGREDIENTS
Chronic: None known.
NAME CAS No. TLV STEL PEL CONTEN
T
Alkyloxypropylpropanediamine 22023-23-0 none none none 35-45%
8: FIRST AID:
Poly(oxypropylene)diamine 9046-10-0 none none none 30-40%
Bisphenol A 80-05-7 none none none 15-25%
Eyes: Flush eyes with water and/or 1% boric acid, lifting
reference section 7, Health Hazard Data for LD (50)
upper and lower lids occasionally for 30 minutes.
Seek prompt medical attention.
3. PHYSICAL DATA:
Boiling Point: N/D Water/Oil Distribution N/D
Skin: Wash with soap and water for at least 15 minutes.
Coefficient:
Remove contaminated clothing and wash before re-
Percent Volatile: <1.0% Solubility in Water: partial
use. Destroy contaminated leather. Seek medical
Freezing Point N/D Specific Gravity: 0.98
attention if irritation persists.
Vapor Pressure@ 20C: < 1mm Hg pH: basic
Vapor Density Heavier than air Evaporation Rate: N/D
Ingestion: Do not induce vomiting. Give large quantities of
Odor Threshold N/D Odor Ammoniacal
water or vinegar diluted with water. Get immediate
Appearance Amber liquid
medical attention. If vomiting occurs spontaneously,
N/D = Not Determined
keep head below hips to prevent aspiration of liquids
into lungs. Do not give anything by mouth to an
4. FIRE AND EXPLOSION HAZARD DATA:
unconscious person.
HMIS Hazard rating: 1 - (Slight Hazard)
Inhalation: Remove victim from exposure. If difficulty with
Flash Point: >200 F (Setaflash)
breathing; administer oxygen and seek immediate
Auto Ignition Temperature: N/D
medical assistance.
Limits of Flammability: LEL: Unknown UEL: Unknown
9. SPECIAL PROTECTION INFORMATION:
EXTINGUISHING MEDIA:
CARBON DIOXIDE, FOAM, DRY CHEMICAL & WATER FOG
Ventilation: Ventilation is recommended. Air movement must be
designed to insure turnover at all locations in work
SPECIAL FIRE & UNUSUAL HAZARDS:
area to avoid the build up of heavy vapors.
Self-contained respirator equipment and full protective clothing are required when smoke and
fumes are generated. Electrical grounding is not recommended.
Personal Protection: Use eye protection and gloves. . Selection of
specific items such as gloves, boots and apron will
5. REACTIVITY DATA:
depend on the operation. Wear respirator
HMIS Reactivity Rating: 0 - (Least hazard)
protection whenever airborne concentrations
exceed TLV ceilings or TWA, use NIOSH
STABILITY: Stable. This product must be mixed with another component to react. Not sensitive to
approved respirators for listed hazard. Confined
mechanical impact.
spaces, rooms or tanks are areas where concern
for TLV's is especially impor tant. Reference
INCOMPATIBILITY: Strong oxidizing agents, acids, epoxy resins, isocyanates and organic
OSHA Regulation CFR 29 1910.134 for
peroxides may result in violent explosive reactions.
recommended respiratory protection.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide and dioxide, nitrogen oxides,
10. ADDITIONAL INFORMATION:
aldehydes and various hydrocarbons from incomplete combustion.
DOT Proper Shipping Name: Polyamines, liquid, corrosive, n.o.s.
HAZARDOUS POLYMERIZATION: Will not occur.
(Tridecyloxypropyl-1,3-propanediamine,
Polyoxypropylenediamine mixture)
6. ENVIRONMENTAL AND DISPOSAL INFORMATION:
DOT Hazard Class or Division: 8
ACTION TO TAKE FOR SPILLS AND LEAKS: Ventilate area. Wear appropriate protective gear.
Contain leak/spill. Clean up residue with absorbent material. Wash down area with water and diluted
Identification Number: UN 2735
acetic acid. Prevent washings from entering waterways.
Packing group: III
WASTE DISPOSAL METHOD: Handle disposal of waste material in manner which complies with
local, state, province, and federal regulations. Landfill if solidified or incinerate at agency approved
Labels Required: CORROSIVE
waste-disposal facility.
WHMIS Classification: Class D, Div. 2, Sub. A & B. Class E
7. HEALTH HAZARD DATA:
WHMIS Labeling: Test tube, hand. Stylized T.
HMIS Hazard Rating: 3 - (Serious Hazard)
Primary Route Of Entry: Dermal, Inhalation
Shelf life: 3 years, minimum.
Effects of Overexposure:
Special Instructions: Storage recommendations: Store at room
Inhalation: Due to low vapor pressure of this product, fumes
temperature. Do not allow to freeze.
will be minimal below 95F. At higher temperatures,
fumes will be irritating.
Title III, Section 313 Reporting: Bisphenol A, CAS 85-05-7, < 20%.
Eyes: Contact can cause severe burns and irreversible
The information given herein is given in good faith. No warranty, expressed or implied, is
damage, irritation, redness, tearing or blurred
made regarding the accuracy of these data or the results obtained from the use thereof.
vision.
All materials may present unknown health hazards and must be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the
Skin Contact: Short single exposure may cause moderate
only hazards that exist. Consult ChemCo Systems Inc. for further information.
irritation to mild burn. Prolonged or repeated
exposure may cause a severe burn. May result in
MSDS036B 07/99
an allergic reaction or sensitization response in
some individuals.
Skin Absorption: Slightly toxic.
|