Analysis

Section 2 - Composition, Information on Ingredients

CAS#	Chemical Name	Percent	EINECS/ELINCS
587-85-9	Diphenylmercury	100	209-606-1

Section 3 - Hazards Identification

Appearance: white powder.
Danger! May be fatal if inhaled, absorbed through the skin or swallowed. May cause eye, skin, and respiratory tract irritation. May cause central nervous system effects. The toxicological properties of this material have not been fully investigated.
Target Organs: Central nervous system.


Potential Health Effects
Eye: May cause eye irritation.
Skin: May cause skin irritation.
Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. Inorganic mercury compounds may cause central and peripheral nervous system effects.
Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Acute exposure to high concentrations of mercury vapors may cause severe respiratory tract irritation.
Chronic: Chronic exposure to mercury may cause permanent central nervous system damage, fatigue, weight loss, tremors, personality changes. Chronic ingestion may cause accumulation of mercury in body tissues. Chronic exposure to mercury vapors may produce weakness, fatigue, anorexia, loss of weight and gastrointestinal disturbances which is collectively referred to as asthenic-vegetative syndrome or micromercurialism. Chronic exposure to mercury compounds may produce immunologic glomerular disease.

Section 4 - First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Remove contaminated clothing and shoes.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use extinguishing media most appropriate for the surrounding fire.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 2; Flammability: 0; Instability: 0

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.

Section 7 - Handling and Storage

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Poison room locked.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name	ACGIH	NIOSH	OSHA - Final PELs
Diphenylmercury	0.1 mg/m3 TWA (as Hg) (listed under Mercury, aryl and inorganic compounds).Skin - potential significant contribution to overall exposure by the cutaneous r oute (listed under Mercury, aryl and inorga nic compounds).	0.05 mg/m3 TWA (vapor, except organo alkyls, as Hg) (listed under Mercury compounds).10 mg/m3 IDLH (as Hg, except organo(alkyl) compounds) (listed under Mercury compounds).	none listed

OSHA Vacated PELs: Diphenylmercury: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties

Physical State: Powder
Appearance: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point:124-126 deg C
Decomposition Temperature:Not available.
Solubility: insoluble
Specific Gravity/Density:Not available.
Molecular Formula:C12H10Hg
Molecular Weight:354.79

Section 10 - Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Dust generation, excess heat.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported

Section 11 - Toxicological Information

RTECS#:      
CAS# 587-85-9: OW3150000
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 587-85-9: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information found
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found
Neurotoxicity: No information found
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

	US DOT	Canada TDG
Shipping Name:	DOT regulated - small quantity provisions apply (see 49CFR173.4)	MERCURY COMPOUND SOLID NOS (DIPHENYLMERCURY)
Hazard Class:		6.1
UN Number:		UN2025
Packing Group:		II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 587-85-9 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
SARA Codes
     CAS # 587-85-9: immediate, delayed.
Section 313
     This material contains Diphenylmercury (listed as Mercury compounds), 100%, (CAS# 587-85-9) which is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
Clean Air Act:
     CAS# 587-85-9 (listed as Mercury compounds) is listed as a hazardous a      ir pollutant (HAP).
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA. CAS# 587-85-9 is listed as a Toxic Pollutant under the Clean Water Act.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 587-85-9 can be found on the following state right to know lists: California, (listed as Mercury compounds), New Jersey, (listed as Mercury compounds), Pennsylvania, (listed as Mercury compounds), Pennsylvania, (listed as Mercury, aryl and inorganic compounds).

California Prop 65
WARNING: This product contains Diphenylmercury, listed as `Mercury compounds', a chemical known to the state of California to cause developmental reproductive toxicity.
California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols:
     T+
Risk Phrases:
     R 26/27/28 Very toxic by inhalation, in contact with skin and if
     swallowed.
     R 33 Danger of cumulative effects.

Safety Phrases:
     S 13 Keep away from food, drink and animal feeding stuffs.
     S 36 Wear suitable protective clothing.
     S 37 Wear suitable gloves.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).
     S 28A After contact with skin, wash immediately with plenty of water
     .

WGK (Water Danger/Protection)
     CAS# 587-85-9: No information available.
Canada - DSL/NDSL
     CAS# 587-85-9 is listed on Canada's NDSL List.
Canada - WHMIS
     This product has a WHMIS classification of D2A, D2B.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List
     CAS# 587-85-9 is listed on the Canadian Ingredient Disclosure List.

Section 16 - Additional Information

MSDS Creation Date: 7/01/1999
Revision #4 Date: 9/26/2007

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.