Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 Suberoyl chloride, 97%
CAS  
:
 10027-07-3
SYNONYMS  
:
 Suberic acid dichloride; Octanedioyl dichloride

Section 1 - Chemical Product and Company Identification
MSDS Name: Suberoyl chloride, 97%
Catalog Numbers: AC216340000, AC216340050, AC216340250
Synonyms:
Suberic acid dichloride; Octanedioyl dichloride
Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
10027-07-3 Suberoyl chloride 97 unlisted

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: clear, colorless clear liquid.
Danger! Corrosive. Causes eye and skin burns. Lachrymator (substance which increases the flow of tears). May cause severe respiratory tract irritation with possible burns. May cause severe digestive tract irritation with possible burns. Moisture sensitive.
Target Organs: No data found.


Potential Health Effects
Eye: Causes eye burns. Lachrymator (substance which increases the flow of tears). May cause chemical conjunctivitis and corneal damage.
Skin: Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion: May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Inhalation: Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
Chronic: Effects may be delayed.

Section 4 - First Aid Measures


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately. Do NOT allow victim to rub eyes or keep eyes closed. Extensiv e irrigation with water is required (at least 30 minutes).
Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion: Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas.
Extinguishing Media: Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers.
Flash Point: > 110 deg C (> 230.00 deg F)
Autoignition Temperature: Not applicable.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 3; Flammability: 1; Instability: 1

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Cover with sand, dry lime or soda ash and place in a closed container for disposal. Provide ventilation. Do not get water inside containers.

Section 7 - Handling and Storage


Handling: Use only in a well-ventilated area. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use and store under nitrogen. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage: Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Keep containers tightly closed. Store protected from moisture.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
Suberoyl chloride none listed none listed none listed

OSHA Vacated PELs: Suberoyl chloride: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Clear liquid
Appearance: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: 7.28
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 162.0 - 163.0 deg C @ 15.00mm
Freezing/Melting Point:Not available.
Decomposition Temperature:Not available.
Solubility: Decomposes.
Specific Gravity/Density:1.172 g/cm3
Molecular Formula:C8H12Cl2O2
Molecular Weight:211.09

Section 10 - Stability and Reactivity


Chemical Stability: Stable under normal temperatures and pressures. Moisture sensitive.
Conditions to Avoid: Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials: Oxidizing agents, strong bases, alcohols, moisture, water.
Hazardous Decomposition Products: Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 10027-07-3 unlisted.
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 10027-07-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No data available.
Teratogenicity: No data available.
Reproductive Effects: No data available.
Mutagenicity: No data available.
Neurotoxicity: No data available.
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: DOT regulated - small quantity provisions apply (see 49CFR173.4) CORROSIVE LIQUID NOS
Hazard Class: 8
UN Number: UN1760
Packing Group: II
Additional Info:SUBEROYL CHLORIDE

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 10027-07-3 is not listed on the TSCA inventory. It is for research and development use only.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 10027-07-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     C
Risk Phrases:

     R 34 Causes burns.

Safety Phrases:

     S 24/25 Avoid contact with skin and eyes.
     S 8 Keep container dry.

WGK (Water Danger/Protection)

     CAS# 10027-07-3: No information available.
Canada - DSL/NDSL
     CAS# 10027-07-3 is listed on Canada's DSL List.
Canada - WHMIS
     not available.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 9/02/1997
Revision #7 Date: 10/03/2005

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
1-Octadecanol 95% 112-92-5
DL-2,3-Diaminopropionic Acid Monohydrochloride, 99% 54897-59-5
5-Methyl-3-heptanone, 96% (gc) 541-85-5
1-Bromo-2,2-dimethoxypropane, 97% 126-38-5
Phenyl 4-aminosalicylate, 99% 133-11-9
Tetraethyltin, 97% 597-64-8
1-Piperazinepropanol, 98% 5317-32-8
Diethyl methylmalonate 609-08-5
2,2,6,6-Tetramethylcyclohexanone, 98% 1195-93-3
2-Nitroresorcinol 601-89-8
o-Methoxycinnamic acid, predominantly trans 6099-03-2
4-Aminobenzyl cyanide, 99% 3544-25-0
2,3-Dichloropyridine, 99% 2402-77-9
2-Amino-1-Phenylethanol, 98% 7568-93-6
Dipropylene Glycol, Tech., 99% (GC) Mixture of Isomeric Propylene Glycol Ethers 25265-71-8
Dibenzylamine 103-49-1
6-Chloro-2-picoline, 98% 18368-63-3
Diethyl Oxalacetate Sodium Salt (PRACT) 40876-98-0
Cyclobutanecarboxylic acid, 98% 3721-95-7
2-(2-Ethoxyethoxy)ethyl Acetate, 99% 112-15-2
2-Mercapto-6-Nitrobenzothiazole, 96% (Titr.) 4845-58-3
Dihydrocytochalasin B 39156-67-7
3-Chloropropylamine Hydrochloride, 98% 6276-54-6
2-Amino-3-methylbenzoic acid, 98% 4389-45-1
m-Phenetidine, 96% (gc) 621-33-0
4,4-Diphenylsemicarbazide, 98% 603-51-0
3-Methyl-1-pentyn-3-ol, 99+% 77-75-8
(R)-(+)-N-Benzyl-alpha-methylbenzylamine 38235-77-7
1,7-Diaza-15-Crown-5, 99% 31249-95-3
L(-)-Xylose 609-06-3
4-Hydroxybenzylidenemalonodinitrile, 99% 3785-90-8
2,2'-Dithiodipyridine, 98% 2127-03-9
Mercury atomic absorption standard solution, 1 mg/ml Hg in 10% HNO3 7439-97-6
Lissamine Rhodamine B Sulfonyl Chloride, 99+% (UV-VIS) 62796-29-6
2,4-Diethyl-2,6-heptadienal, 97% Mixture of Isomers 85136-07-8
Dimethyldiselenide, 99+% 7101-31-7
2-Amino-4-Hydroxy-1H-Pteridine 2236-60-4
Alpha-Bromo-O-Tolunitrile, 98% 22115-41-9
(2-Chloroethyl)trimethylammonium chloride, 98% 999-81-5
Poly(diallyl phthalate), average m.w. 65000 (gpc) 25053-15-0
Suberoyl chloride, 97% 10027-07-3
4,4'-Di-Tert.-Butylbiphenyl, 99+% 1625-91-8
4-Dimethylaminobenzaldehyde, 98% 100-10-74-Dimethylaminobenzaldehyde<-td>
4-Nitroimidazole, 98% 3034-38-6
Isobutyl cyanoacetate, 99+% 13361-31-4
p-Phenylenediamine 106-50-3
3-Fluoro-2-methylaniline, 97% 443-86-7
Propionitrile, 99% 107-12-0
Manganese(II) carbonate hydrate, 90% 34156-69-9
1-Methoxy-1,4-cyclohexadiene, tech., 75% 2886-59-1



HBCChem,Inc

Chemical Information Net Copyright Reserved