Huntsman Advanced Materials Americas Inc.
Distributed by Freeman Mfg & Supply Co.
800.321.8511 www.freemansupply.com
24-Hour Emergency Phone: (800) 328-8501
MSDS No: 5740
Effective Date: 8/9/07 Material Safety Data Sheet
Health: 1
1. PRODUCT IDENTIFICATION 1
Flammability: 1
1 0
Reactivity: 0
Trade Name: DT 082
Personal Protection:
Chemical Family: Alumina
HMIS RATING
NFPA RATING
Intended Use or Product Type: Filler
2. COMPOSITION / INFORMATION ON INGREDIENTS
O CAS No. CHEMICAL IDENTITY EXPOSURE LIMITS CARCINOGEN
S STATUS
H ACGIH OSHA MFR. IARC NTP OSHA
A TWA STEL PEL STEL
* 21645-51-2 Aluminum hydroxide NE NE NE NE NE NR NR NR
Common Hydrated Alumina
Name:
Concentration 60.00 - 100.00 % by wt
NE = Not Established NR = Not Reviewed * = OSHA Hazardous Ingredient
3. HAZARDS IDENTIFICATION
Emergency Overview: Dust hazard. Avoid dusty conditions. Avoid breathing dust. Use with adequate ventilation. In accord
with good industrial practice, handle with due care.
Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.
4. FIRST AID MEASURES
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Seek immediate medical attention.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes. Seek immediate medical attention.
Inhalation: Remove to fresh air. Seek immediate medical attention.
Printed: 8/24/2007 Page 1 of 5
DT 082 Huntsman Advanced Materials
Effective Date: 8/9/07 Americas Inc. (EL)
Eyes: Immediately flush eyes with water for at least 15 minutes. Seek immediate medical attention.
Medical Conditions Aggravated by Exposure: Skin and eye conditions.
Additional Information: Referral to a physician is recommended if there is any question about the seriousness of any injury.
5. FIRE FIGHTING MEASURES
Not Applicable
Flash Point:
Not Applicable
Flash Point Method Used:
Not established
Flammable Limits in Air (Lower - % by volume):
Not established
Flammable Limits in Air (Upper - % by volume):
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam, water.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Sweep up into approved disposal container. Thoroughly vacuum area. Do not create dusty
condition.
7. HANDLING AND STORAGE
Signal Word: Caution!
Precautions: Dust hazard. Avoid dusty conditions. Avoid breathing dust. Use with adequate ventilation. Use normal industrial
hygiene practices. Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling.
Other Handling Information: Nuisance dust may be generated when sanding or sawing cured material.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Skin Protection: Wear canvas gloves as a standard handling procedure.
Respiratory Protection: Use NIOSH approved dust mask, if required during machining.
Eye Protection: Wear safety glasses to protect against dust particles during machining.
Engineering Controls: General mechanical and local exhaust in accordance with ACGIH recommendations.
9. PHYSICAL AND CHEMICAL PROPERTIES
White
Color:
Powder
Physical State:
Not Determined
Solubility in Water:
Printed: 8/24/2007 Page 2 of 5
DT 082 Huntsman Advanced Materials
Effective Date: 8/9/07 Americas Inc. (EL)
Not Determined
Vapor Pressure:
2.42 (water = 1)
Specific Gravity:
Not Determined
Boiling Point:
Not Determined
Melting Point:
Not Determined
Evaporation Rate:
Not Determined
Density:
Not Determined
Vapor Density:
Not Determined
pH:
Not Determined
Coefficient of water/oil:
Percent Volatile: Not determined.
10. STABILITY AND REACTIVITY
Conditions to Avoid: Excessive heat for prolonged periods of time.
Stability: Stable.
Hazardous Decomposition Products: Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Eye Irritation: Dust may cause minor irritation.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Consult qualified local or corporate personnel for method that will comply with local, state and federal
health and environmental regulations.
14. TRANSPORT INFORMATION
DOT: Non-Bulk
Not Regulated
Proper Shipping Name:
IATA: Non-Bulk
Not Regulated
Proper Shipping Name:
IMDG: Non-Bulk
Not Regulated
Proper Shipping Name:
TDG: Non-Bulk
Not Regulated
Proper Shipping Name:
15. REGULATORY INFORMATION
Printed: 8/24/2007 Page 3 of 5
DT 082 Huntsman Advanced Materials
Effective Date: 8/9/07 Americas Inc. (EL)
US Federal Regulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance with
the federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemical
under that standard.
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261).
SARA Title III: Section 313 Toxic Chemical List (TCL): This product does not contain any chemicals for routine annual toxic
chemical release reporting under Section 313 (40 CFR 372).
TSCA Section 8(b) - Inventory Status: All chemical components of this product are in compliance with TSCA inventory
requirements.
TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b)
export notification.
International Regulations:
Canadian Inventory Status: This product contains only chemicals that are currently listed on the Canadian Domestic Substance
List.
Canadian WHMIS: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
and the MSDS contains all the information required by the Controlled Products Regulations. Not WHMIS controlled.
State Regulations:
California Proposition 65: This product does not contain any chemicals currently on the California list of Known Carcinogens
and Reproductive Toxins.
Pennsylvania Right-to-Know: The following is required composition information:
Chemical Name: Aluminum hydroxide
Common Name: Hydrated Alumina
CAS Number: 21645-51-2
Comment: Not on Pennsylvania Hazardous Substance List
16. OTHER INFORMATION
5740
MSDS No:
Dianne Blessing
Approved By:
EH&S Specialist
Title:
Disclaimer: The information and recommendations contained herein are based upon tests in controlled laboratory conditions, are
believed to be correct, and are provided for the sole purpose of hazard communication as part of Huntsman's product safety
program. This product has not been tested for, and therefore is not recommended or suitable for, uses for which prolonged contact
with mucous membranes, abraded skin, or blood is intended or likely, or for uses for which implantation within the human body is
intended, and Huntsman assumes no liability for any such uses.
Printed: 8/24/2007 Page 4 of 5
DT 082 Huntsman Advanced Materials
Effective Date: 8/9/07 Americas Inc. (EL)
The information and recommendations contained herein are not intended to constitute performance information concerning the
product, which is available in separate technical data sheets available from Huntsman upon request. Users are urged, and are urged
to urge others who may come in contact with the product, to obtain and consult data sheets prior to purchase, use, transportation or
storage of the product.
HUNTSMAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. HUNTSMAN'S LIABILITY IS
STRICTLY LIMITED TO REIMBURSEMENT OF BUYER'S PURCHASE PRICE, OR IN HUNTSMAN'S DISCRETION
REPLACEMENT, OF THE PRODUCT IN RESPECT OF WHICH SUCH CLAIM IS MADE. HUNTSMAN'S LIABILITY IS
STRICTLY LIMITED BY LEGAL NOTICES IN TECHNICAL DATA SHEETS, PRODUCT LITERATURE, AND/OR SALE
DOCUMENTS. The foregoing DISCLAIMERS and LIMITATION OF LIABILITY supercede inconsistent or contradictory
provisions in Buyer's documents.
USER SHOULD CONSULT A LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENTAL AGENCY TO DETERMINE
THE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE PRODUCT. HUNTSMAN
DOES NOT UNDERTAKE TO FURNISH ADVICE ON SUCH MATTERS.
NO PERSON OR ORGANIZATION EXCEPT A DULY AUTHORIZED HUNTSMAN EMPLOYEE IS AUTHORIZED TO
PROVIDE OR MAKE AVAILABLE DATA SHEETS FOR HUNTSMAN PRODUCTS. DATA SHEETS FROM
UNAUTHORIZED SOURCES MAY CONTAIN INFORMATION THAT IS NO LONGER CURRENT OR ACCURATE. NO
PART OF THIS DATA SHEET MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM, OR BY ANY MEANS,
WITHOUT PERMISSION IN WRITING FROM HUNTSMAN. ALL REQUESTS FOR PERMISSION TO REPRODUCE
MATERIAL FROM THIS DATA SHEET SHOULD BE DIRECTED TO HUNTSMAN, MANAGER, PRODUCT SAFETY AT
THE ABOVE ADDRESS.
Printed: 8/24/2007 Page 5 of 5
|