MATERIAL SAFETY DATA SHEET
Section I
Company Name: Future Graphics, LLC.
Address: 1175 Aviation Place
City,State,Zip Code: San Fernando, CA 91340
Phone for Information: 818 / 837-8100
EMERGENCY CONTACT: FUTURE GRAPHICS 818 / 837-8100, 800 / 394-9900
SP302TNR145
Product Code:
TNR BTL MINOLTA SP-302 145gm
Description:
Date Revised: 11/3/2003
Chemical Name: Black Toner
Chemical Family: Thermoplastic Toner Powder
HAZARDOUS INGREDIENTS / IDENTITY INFORMATION
Section II
INGREDIENTS:
Styrene Acrylic Resin
Carbon Black
Polypropylene Wax
Charge Control Agent
The specific chemical identities are trade secret.
PHYSICAL / CHEMICAL CHARACTERISTICS
Section III
Boiling Point (F): Not Applicable
Specific Gravity (Water = 1): 1
Vapor Pressure (mm HG): Not Applicable
Melting Point: Not Applicable
Vapor Density (Air = 1): Not Applicable
Evaporation Rate (Butyl Acetate =1): Not Applicable
Solubility in Water: Negligible
Appearance & Odor: Black Powder, no odor
FIRE & EXPLOSION HAZARD DATA
Section IV
Flash Point (Method Used): Not Applicable
Flammable Limits: Not Applicable
LEL: Not Applicable
UEL: Not Applicable
Extinguishing Media: Water spray or mist, Foam , Dry Chemical, Co2
Special Fire Fighting Procedures: Avoid inhalation of smoke , Wear MSHA / NIOSH S.C.U.B.A
Unusual Fire and Explosion Hazards: Toner is a combustible powder. When dispersed in air, it can form
explosive mixtures.
Reactive Data
Section V
Stability: Unstable: Stable: X
Conditions to Avoid: No Data
Incompatibility (Materials to Avoid): None
Hazardous Decomposition or Byproducts: Only after combustion
Hazardous Polymerization: Will Occur: Will Not Occur: X
Page 1 of 2
MATERIAL SAFETY DATA SHEET
From page1, Section I
Company Name: Future Graphics, LLC.
Address: 1175 Aviation Place
City,State,Zip Code: San Fernando, CA 91340
Phone for Information: 818 / 837-8100
EMERGENCY CONTACT: FUTURE GRAPHICS 818 / 837-8100, 800 / 394-9900
SP302TNR145
Product Code:
TNR BTL MINOLTA SP-302 145gm
Description:
Date Revised: 11/3/2003
Chemical Name: Black Toner
Chemical Family: Thermoplastic Toner Powder
HEALTH HAZARD DATA
Section VI
Primary Entry Routes: Inhalation
Inhalation Effects: Slight irritation of respiratory tract.
Eye Effects: Dust may cause irritation by mechanical abrasion.
Skin Effects: May cause skin irritation.
Ingestion Effects: Not known.
Carcenogenicity: None listed
Signs or Symptoms of Exposure: Respiratory irritation in prolonged exposure to excessive dust.
Medical Conditions Aggravated by Exposure: None under normal use conditions.
Chronic Effects and/or Recommendations: None under normal use conditions.
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Do not allow victim to rub or keep eyes tightly shut. Gently lift eyelids and flush
eyes with large amounts of water. Seek medical attention.
INHALATION: Remove the person to fresh air. Seek medical attention.
SKIN: Wash with soap and water.
INGESTION: Dilute stomach contents with several glasses of water.
PRECAUTIONS FOR SAFE HANDLING AND USE
Section VII
Steps to be Taken in Case Material is Released: Loose toner can be removed by using vacuum cleaner or broom.
Residue can be removed with soap and water.
Waste Disposal Method: Do not incinerate. Dispose of in accordance with federal, state,
and local regulations.
Precautions to be Taken in Handling or Storage: Eye protection and respirators may be required for bulk handling.
Avoid storing next to strong oxidizers.
Other Precautions: Avoid excessive exposure to to heat
CONTROL MEASURES
Section VIII
Respiratory Protection: Follow Federal and State guide lines for respirator selection and use.
Ventilation:
Local: Local exhaust ventilation is preferred for controlling dispersion at source
Mechanical: No Data
Special: No Data
Other: Provide general or local exhaust ventilation.
Protective Gloves: Wear chemically protective gloves.
Eye Protection: Wear protective eyeglasses or chemical safety goggles
Other Protective Clothing or Equipment: None required.
Work / Hygienic Practices: Wash hands with soap and water prior to eating.
SPECIAL INSTRUCTIONS
This information is believed to be true and accurate. It represents the best information currently available to us. We make no warranty , expressed or implied with regard to
such information. We make no liability resulting from its use. Users should make their own investigations to determine the suitability for their particular purposes.
Page 2 of 2
|