Flitz Polishing Tips
INSTRUCTIONS FOR GENERAL PURPOSE USE: Use sparingly, polish with a soļæ? cloth while
FLITZ is still moist. Do not let dry.
POLISHING TIP for Brass, Copper, Bronze, Silver, Aluminum, Mag Alloys, Stainless Steel, etc.: Ap-
plying FLITZ with paper towel will act as a mild abrasive and help to remove heavy tarnish faster.
Polish with Flitz Microļ¬ber Cloth.
RUST TIP: Use Flitz with #0000 steel wool or a white 3Mā? Scotch Brite pad to act as an abrasive.
Bronze wool may be used for marine applications.
WATER STAINS on Shower Doors, Metal ļ¬xtures, etc.: For stubborn water stains, surface rust, and
lime deposits, apply Flitz with a nylon scouring pad or white 3Mā? Scotch Brite pad to act as an abra-
sive.
FIBERGLASS & PAINTED SURFACES: Flitz safely removes oxidation, chalking, and sun fading
on ļ¬berglass, Plexiglas and painted surfaces. For large ļ¬berglass and painted surfaces Flitz can be
applied using a low speed bu�er. (Under 1000 R.P.M.) A random orbital bu�er designed for this
purpose may also be used. If polishing by hand, apply FLITZ with a damp cloth, bu� with a so� dry
cloth.
DIAMOND PLATE ALUMINUM TIP: Use Flitz Buļ¬? ān Polish Ball to reach all grooves and crevices.
HEAVY TARNISH AND ANTIQUES (Brass, Bronze, Copper Only): If metal is very dark or green
an Acid precleaner can be used. Wipe or spray liquid Lysolā? Toilet Bowl Cleaner or Eagle Oneā?
Chrome & Wire Wheel Cleaner onto surface to be cleaned. Take precaution and wear gloves. Let sit 5
to 7 minutes, repeat if necessary. Wash o� with baking soda and water to neutralize the acid. Polish
metal with Flitz and a paper towel or rag.
HEAT DISCOLORATION: On chrome exhaust pipes, truck stacks and stovetops, warm up the
surface (not hot), apply Flitz, and let penetrate 3 minutes and rub briskly with paper towel. Up to 3
applications may be necessary. For extreme cases use Flitz with #0000 steel wool.
ALUMINUM TIP: For large surfaces Flitz may be applied with a slow speed, or random orbital
buļ¬?er. Lambs wool, terry cloth, or foam pads may be used. Wipe surfaces with baking ļ¬our or corn-
starch to remove black residue. A solvent, such as Denatured Alcohol, may be used around rivets or
crevices.
GUN CLEANING TIP: Put Flitz onto clean gun patch or bore brush. Lightly work into barrel. Re-
move dirty patch, bu� with clean patch. Use 2 TBLS of Flitz for polishing brass gun shells in tum-
blers. Flitz safely removes rust on factory gun bluing.
JEWELRY TIP: Flitz will not harm diamonds or gemstones. Great for solid gold, silver, and platinum.
CLEAR COATING: Flitz will not harm or remove clear protective coatings such as lacquer or poly-
urethane etc. To remove the tarnish beneath the lacquered ļ¬nish, you must ļ¬rst strip oļ¬? the lacquer
coating. Use lacquers stripper or paint remover (available at your local hardware store). A clear coat-
ing may be reapplied aļæ½er polishing if desired.
FLITZ Cleans, polishes, and protects up to 6 months in fresh water conditions, 3 Months in Salt Wa-
ter. Safe for use on Brass, Copper, Bronze, Sterling Sliver, Silver Plate, Solid Gold, Pewter, Chrome
Stainless Steel, Beryllium, Magnesium, Nickel, Platinum, Anodized Aluminum, Armatel, Factory Gun
Bluing, Glass, Fiberglass, Plexiglas, Acrylic, Painted Surfaces.
FLITZ POLISHING & BUFFING BALL TOOL: Ideal for buļ¬ng hard to reach areas. Fits all drills &
air tools. No over heating because of orbital design. Bu�s up to 2000 rpm. Will bu� out scu�s, oxida-
tion, tarnish, brake dust, piļæ½ing, corrosion on all metals, paints, ļ¬berglass, plastics, eisenglass, and
wood. Reusable, machine washable. Polishes in minutes what otherwise takes hours. Great on tex-
tured or smooth surfaces. Made from Italian Polishing Felt.
MICROFIBER POLISHING CLOTH: Absorbs 4 times its weight! Removes dust, dirt, ļ¬ngerprints,
grime, grease, oil, polish, wax, insects, tar & nicotine ļ¬lm. Streak free cleaning. Use wet or dry. Micro
ļ¬bers aļæ½ract the grime and liquid deep into the ultra thin, wedge shaped ļ¬bers and holds it like a
magnet. No Lint!
To order Flitz polishing products or learn more, visit www.ļ¬itzusa.com
|