Material Safety Data Sheet Page 1 of 2
Chlorine Water Saturated
MSDS # 181.00
Section 1: Product and Company Identification
Chlorine Water Saturated
Synonyms/General Names: N/A
Product Use: For educational use only
Manufacturer: Columbus Chemical Industries, Inc., Columbus, WI 53925.
24 Hour Emergency Information Telephone Numbers
CHEMTREC (USA): 800-424-9300 CANUTEC (Canada): 613-424-6666
ScholAR Chemistry; 5100 W. Henrietta Rd, Rochester, NY 14586; (866) 260-0501; www.Scholarchemistry.com
Section 2: Hazards Identification
Pale yellow liquid; strong chlorine odor. HMIS (0 to 4)
Health 3
WARNING! Highly toxic by ingestion and inhalation and a severe body tissue irritant 0
Fire Hazard
Target organs: Digestive and respiratory tracts. Reactivity 1
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Section 3: Composition / Information on Ingredients
Chlorine Gas, (7782-50-5), <1% . Water, (7732-18-5), >99%.
Section 4: First Aid Measures
Always seek professional medical attention after first aid measures are provided.
Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Poison Control immediately. Do not induce vomiting. Rinse mouth with cold water. Give victim 1-2 cups of
water or milk to drink.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.
Section 5: Fire Fighting Measures
Noncombustible solution. When heated to decomposition, emits acrid chlorine fumes. 0
Protective equipment and precautions for firefighters: Use foam or dry chemical to extinguish fire. 3 1
Firefighters should wear full fire fighting turn-out gear and respiratory protection (SCBA). Cool
container with water spray. Material is not sensitive to mechanical impact or static discharge.
Section 6: Accidental Release Measures
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected
personnel. Remove all ignition sources and ventilate area. Contain spill with sand or absorbent material and place material in a
sealed bag or container for disposal. Wash spill area after pickup is complete. See Section 13 for disposal information.
Section 7: Handling and Storage White
Handling: Use with adequate ventilation and do not breathe dust or vapor. Avoid contact with skin, eyes, or clothing. Wash
hands thoroughly after handling.
Storage: Store in Corrosive Area [White Storage] with other corrosive items. Store in a dedicated corrosive cabinet. Store in a
cool, dry, well-ventilated, locked store room away from incompatible materials.
Section 8: Exposure Controls / Personal Protection
Use ventilation to keep airborne concentrations below exposure limits. Have approved eyewash facility, safety shower, and fire
extinguishers readily available. Wear chemical splash goggles and chemical resistant clothing such as gloves and aprons. Wash
hands thoroughly after handling material and before eating or drinking. Use NIOSH-approved respirator with an acid/organic
cartridge. Exposure guidelines Chlorine: OSHA PEL: 3 mg/m3 ceiling, ACGIH TLV: 1.5 mg/m3, STEL: 2.9 mg/m3.
?2008, Scholar Chemistry. All Rights Reserved. 1/23/2009
Material Safety Data Sheet Page 2 of 2
MSDS # 181.00 Chlorine Water Saturated Scholar Chemistry
Section 9: Physical and Chemical Properties
Molecular formula Cl2. Appearance Pale yellow liquid.
Molecular weight N/A. Odor Chlorine odor.
Specific Gravity 1.00 g/mL @ 20癈. Odor Threshold N/A.
Vapor Density (air=1) N/A. Solubility N/A.
Melting Point N/A. Evaporation rate N/A (Butyl acetate = 1).
Boiling Point/Range N/A. Partition Coefficient N/A (log POW).
Vapor Pressure (20癈) N/A. pH N/A.
Flash Point: N/A. LEL N/A.
Autoignition Temp.: N/A. UEL N/A.
N/A = Not available or applicable
Section 10: Stability and Reactivity
Avoid heat and ignition sources.
Stability: Stable under normal conditions of use and storage.
Incompatibility: N/A
Shelf life: Poor shelf life, protect from light and heat.
Section 11: Toxicology Information
Acute Symptoms/Signs of exposure: Eyes: Redness, tearing, itching, burning, damage to cornea, conjunctivitis, loss of vision.
Skin: Redness, blistering, burning, itching, tissue destruction with slow healing. Ingestion: Nausea, vomiting, burning, diarrhea,
ulceration, convulsions, shock. Inhalation: Coughing, wheezing, shortness of breath, headache, spasm, inflammation and edema
of bronchi, pneumonitis.
Chronic Effects: Repeated/prolonged skin contact may cause thickening, blackening or cracking. Repeated eye exposure may
cause corneal erosion or loss of vision.
Sensitization: none expected
Chlorine: LD50 [oral, rat]; N/A; LC50 [rat]; 293 ppm (1 hour); LD50 Dermal [rabbit]; N/A
Material has not been found to be a carcinogen nor produce genetic, reproductive, or developmental effects.
Section 12: Ecological Information
Ecotoxicity (aquatic and terrestrial): Ecological impact has not been determined.
Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than
regional or national regulations. Small amounts of this material may be suitable for sanitary sewer disposal after being
neutralized to pH 7.
Section 14: Transport Information
DOT Shipping Name: Corrosive liquid, Oxidizing, n.o.s., Canada TDG: Corrosive liquid, Oxidizing, n.o.s.
(Chlorine). (Chlorine).
DOT Hazard Class: 8(5.1), pg II . Hazard Class: 8(5.1), pg II .
Identification Number: UN3093 . UN Number: UN3093 .
Section 15: Regulatory Information
EINECS: Not Listed . WHMIS Canada: Not WHMIS Controlled.
TSCA: All components are listed or are exempt. California Proposition 65: Not listed .
The product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS
contains all the information required by the Controlled Products Regulations.
Section 16: Other Information
Current Issue Date: January 23, 2009
Disclaimer: Scholar Chemistry and Columbus Chemical Industries, Inc., ("S&C") believes that the information herein is factual but is not intended to be all inclusive. The information
relates only to the specific material designated and does not relate to its use in combination with other materials or its use as to any particular process. Because safety standards and
regulations are subject to change and because S&C has no continuing control over the material, those handling, storing or using the material should satisfy themselves that they have
current information regarding the particular way the material is handled, stored or used and that the same is done in accordance with federal, state and local law. S&C makes no
warranty, expressed or implied, including (without limitation) warranties with respect to the completeness or continuing accuracy of the information contained herein or with
respect to fitness for any particular use.
?2008, Scholar Chemistry. All Rights Reserved. 1/23/2009
|