UTILITY MANUFACTURING CO., INC. MATERIAL SAFETY DATA SHEET
700 MAIN STREET, WESTBURY, NY 11590
(516) 997-6300 - FAX # (516) 997-6345
SUPER URI-BLOCKS URINAL DEODORANT BLOCKS
FOR CHEMICAL EMERGENCY: Spill, Leak, Fire, Exposure, or Accident - Call INFOTRAC - Day or Night: 1-800-535-5053
THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD) IMPORTANT: Read this MSDS
before handling & disposing of this product. Pass this information on to employees, customers and users of this product.
PRODUCT IDENTIFICATION
DOT Shipping name: CAS NO.: MIXTURE
CLEANING COMPOUND, NOI
Chemical Family: UN/NA #: N/A
N/A
DOT Hazard Class: DATE OF ISSUE: 5/08
N/A
SECTION I - HAZARDOUS INGREDIENTS/EXPOSURE LIMITS
Hazardous Ingredients: CAS # TLV/PEL AGENCY TYPE SARA-313(% Range)
SODIUM DODECYL BENZENE 25115-30-0 NOT ESTABLISHED
SULFONATE
SODIUM TETRABORATE PENTAHYDRATE 12179-04-0 NOT ESTABLISHED
(BORAX)
SODIUM SULFATE ANHYDROUS 7757-82-6 NOT ESTABLISHED
SODIUM TALLOWATE (SOAP) 8052-48-0 NOT ESTABLISHED
CHLOROXYLENOL 88-04-0 NOT ESTABLISHED
SECTION II - EMERGENCY AND FIRST AID PROCEDURES
EYE CONTACT: If irritation or redness develops, flush eyes with clean water and seek medical attention. For direct contact hold eyelids
apart for at least 15 minutes. Seek medical attention.
SKIN CONTACT: Cleanse affected areas thoroughly by washing with mild soap and water. If irritation persists seek medical attention.
INHALATION: (breathing) Not expected to be a hazard under normal operating conditions..
INGESTION: (swallowing) If swallowed, seek emergency medical attention.
SECTION III - HEALTH HAZARDS / ROUTES OF ENTRY
EYE CONTACT: One or more components of this material may be an eye irritant.
SKIN CONTACT: Continuous contact with this material may cause drying of skin. Chemical itself is an irritant or sensitizer.
SKIN ABSORPTION: Symptoms of toxicity are not anticipated by this route .
INHALATION: (breathing) Not expected to be a hazard under normal operating conditions.
INGESTION: (swallowing) Ingestion of large quantities may cause the following: Irritation of digestive tract, signs of nervous system
depression, such as headache, drowsiness, dizziness, loss of coordination, fatigue, and nausea.
SECTION IV - SPECIAL PROTECTION INFORMATION
VENTILATION: If current ventilation practices are not adequate to maintain airborne concentrations below established exposure limits
(see section I), additional ventilation or exhaust systems may be required.
RESPIRATORY PROTECTION: The use of respiratory protection is advised when concentrates exceed the established exposure limits
(see Section I).
PROTECTIVE GLOVES: The use of gloves impermeable to the specific material handled is advised to prevent possible irritation.
EYE PROTECTION: Approved eye protection to safeguard against potential eye contact, irritation or injury is recommended.
SECTION V - REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY: (materials to avoid) This product is incompatible with: Oxidizing agents, strong acids and bases
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition in the presence of air may yield carbon monoxide, carbon
dioxide.
HAZARDOUS POLYMERIZATION: Will not occur
SECTION VI - SPILL OR LEAK PROCEDURES
Page 1 45-2500
UTILITY MANUFACTURING CO., INC. MATERIAL SAFETY DATA SHEET
700 MAIN STREET, WESTBURY, NY 11590
(516) 997-6300 - FAX # (516) 997-6345
SUPER URI-BLOCKS URINAL DEODORANT BLOCKS
PRECAUTIONS IN CASE OF LEAK OR SPILL: Shovel spill into proper containers and flush area with water.
WASTE DISPOSAL METHOD: Dispose of product in accordance with local, county, state, and federal regulations.
SECTION VII - STORAGE AND SPECIAL PRECAUTIONS
HANDLING AND STORAGE PRECAUTIONS: Do not get in eyes or on skin. Avoid inhalation or ingestion. Keep away from heat.
Keep away from children. Dispose in accordance with local, state and federal regulations. Observe good personal hygiene. Wash
hands before eating.
SECTION VIII - FIRE AND EXPLOSION HAZARD DATA
EXTINGUISHING MEDIA: Extinguish with water, dry chemical, CO2, or a universal type foam.
FIRE AND EXPLOSION HAZARD: May decompose during contact with flames, heating elements, or in combustion engines releasing
irritating gases.
FIRE FIGHTING PROCEDURES: Wear appropriate protective equipment including respiratory protection as conditions warrant (see
Section IV). Stop spill/release if it can be done without risk. Water spray may be useful in minimizing or dispersing vapors and
cooling equipment exposed to heat and flame
SECTION IX - PHYSICAL DATA
APPROXIMATE BOILING POINT (DEG F): PER CENT VOLATILE:
N/A N/A
SPECIFIC GRAVITY (68 F): FLASH POINT (TCC, DEG F):
N/A N/A
RELATIVE EVAPORATION RATE PER CENT SOLUBILITY IN
N/A 100
(ESTIMATED): WATER:
VAPOR PRESSURE @20C mmHg N/A
(CALCULATED):
SECTION X - OTHER REGULATORY DATA
SARA HMIS
SECTION 302: NOT LISTED Health: 1
SECTION 311 & 312: NOT LISTED Flammability: 1
SECTION 313: See Section I.I Reactivity: 0
TSCA
CALIFORNIA PROPOSITION 65
All components are in full compliance
with the TSCA inventory. NOT LISTED
RCRA CERCLA
Waste material would be a D008 SODIUM DODECYL BENZENE SULFONATE RQ: 1000 LBS.
CARCINOGENICITY:
NOT LISTED with NTP or IARC.
NOTICE
The supplier disclaims all expressed or implied warranties of merchantability or fitness for a specific use, with respect to the product or the information
provided herein, except for conformation to contracted specifications. All information appearing herein is based upon data obtained from manufactures
and/or recognized technical sources. While the information is believed to be accurate, we make no representations as to its accuracy or sufficiency.
Conditions of use are beyond our control, and therefore users are responsible for verifying the data under their own operating conditions to determine
whether the product is suitable for their particular purposes and they assume risks of their use, handling, and disposal of the product. Users also assume all
risks in regards to the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein,
and does not relate to its use in combination with any other material or process.
Page 2 45-2500
|