Material Safety Data Sheet Tribolube-5493
QUICK IDENTIFIER
May be used to comply with OSHA's ,Hazard Communication Standard.
Common Name: (used on Label and list)
29 CFR 1910. 1200 Standard must be consulted for specific requirements.
SECTION 1- MANUFACTURER
Manufacturer's
HEALTH 1
Name Aerospace Lubricants, Inc
Address
FLAMMABILITY 0
Emergency
1600 Georgesville Road Telephone No.
614-878-3600
City, State, and Zip Other
REACTIVITY 0
Columbus, Ohio 43228 Information
614-878-3600
Calls
B
Date January 3, 2006 PERSONAL PROTECTION
Signature of Person
Prepared Rev. D
Stephen E. Gates
Responsible for Preparation
SECTION 2- HAZARDOUS INGREDIENTS/IDENTITY
Hazardous Component(s) (chemical & common name(s) OSHA ACGIH Other Exposure % CAS
PEL TLV Limits (optional) NO.
No hazardous components were knowingly incorporated into this lubricant. This product is not considered hazardous according to the OSHA
Hazardous Communication Standard 29CFR 1910.1200
Threshold Limit Value: LD50>40G/KG (Non-toxic)
OSHA Threshold Limit Value: LD50>40G/KG
ACGIH Threshold Limit Value: LD50>40G/KG
Carcinogen - NTP Program: N/A
Carcinogen - IARC Program: N/A
SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS
Boiling Specific Vapor
10-2at 20潞C
Point Gravity (H O=1)
N/A Pressure (mm Hg)
1.19
Vapor
Density (Air=1)
N/A
Solubility Reactivity in
in Water Water
Non-reactive
Insoluble
Melting
Appearance
Point
and Odor White, Odorless Above 250潞C
SECTION 4 - FIRE & EXPLOSION DATA
Flash UEL
Flammable Limits LEL
Method
Point Upper
in Air % by Volume Lowe
N/A N/A N/A
Used N/A
N/A
Extinguisher
Auto-Ignition
Media
Temperature
N/A
Nonflammable
Special Fire
Fighting Procedures
Self contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals. Decomposition
at temperatures above 290潞C may cause the evolution of toxic gaseous fluorine and formaldehyde compounds.
Unusual Fire and
Explosion Hazards
Toxic fluorine & formaldehyde gases are by-products of combustion.
This product contains Methylpolysiloxanes which can generate Formaldahyde at approximately 300潞F.
Formaldehyde ia a skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and potential cancer hazard
Tribodat/tribomsd/t-5493
Tribolube-5493
SECTION 5 - PHYSICAL HAZARDS (REACTIVITY DATA)
Conditions
Stability Unstable
to Avoid
Stable X Avoid heating above 250潞C.
Incompatability
Molten alkali metals, interhalogen compounds, strong or nonaqueous alkali and Lewis acids above 100潞C
(Materials to Avoid
Hazardous
Decomposition Products Toxic Fluorine & formaldehyde gases
May Cccur
Hazardous Conditions
Will Not Occur X
polymerization to Avoid
Avoid heating above 250潞C
SECTION 6 - HEALTH HAZARDS
1. Acute 2. Chronic
None None
Signs and
Mild irritant to the skin upon prolonged exposure for some individuals.
Sympton of Exposure
Decomposition products formed at high temperatures above 250潞C may cause "polymer fever."
Medical Condition Generally
No known medical condition that might be aggravated by exposure.
Aggravated by Exposure
National Toxicology I.A.R.C. OSHA Yes
Yes
Yes
Chemical Listed as Carcinogen
X
Program Monographs No
X X
No No
None
or Potential Carcinogen
Emergency and
First Aid Procedures
See below
Slightly toxic by inhalation (4 hr. LC 50 1,000-5000 ppm; 8-40 mg/l).If discomfort occurs, move to
1. Inhalation
fresh air; contact physician.
2. Eyes
ROUTES
Flush with water; if irritated, contact physician.
OF Wipe off and wash with soap and water. If irritation develops, contact physician.
3. Skin
ENTRY Very low toxicity by contact (LD50> 10,000 mg/kg)
4. Ingestion
Very low toxicity by ingestion (oral LD50>5,000 mg/kg). Give large amounts of water, contact physician.
SECTION 7 -SPECIAL PRECAUTION AND SPILL/LEAK PROCEDURES
Precautions to be Taken
Use reasonable care. Do not store above 250潞F or near flammables or explosive material.
in Handling and Storage
Other
Toxic vapors may evolve above 250潞C; provide adequate ventilation if used above this temperature.
Precautions
Avoid spills; causes slippery surfaces.
Steps to be Taken in Case
Scrape up with proper tools; wipe up with absorbant cloth or paper towel; apply non-skid absorbant material to floor. Collect
Material is Released or Spilled
waste materials for salvage or disposal.
Waste Disposal
Methods (Consult federal, state, and local regulations)
Dispose of in accordance with current Federal, State, and Local Regulations.
SECTION 8 - SPECIAL PROTECTION INFORMATION/CONTROL MEASURES
Respiratory Protection
Not required unless product is being used as a mist.
(Specify Type)
Mechanical Special
Local Other
Ventilation
Exhaust (General)
Recommended Not required Recommended Not required
Protective Eye
Plastic disposable
Gloves Safety glasses recommended
Protection
Other Protective
Clothing or Equipment
Plastic apron, fabric laboratory coat recommended.
Work/Hygienic Practices
Do not contaminate smoking materials; wash hands and / or contaminated area after exposure.
|