Material Safety Data Sheet (MSDS)
Revision Number: 1.0 Last updated December, 2008
Product and Company Identification
Product Name: 1 - Pyrenebutanoic acid
Catalog Number: 81236
Unit Size: 100 mg
Manufacturer/Supplier: Anaspec,Inc.
2149 O'Toole Avenue, Suite F
San Jose, CA 95131
Tel: 408-452-5055
Fax: 408-452-5059
http://www.anaspec.com
e-mail: service@anaspec.com
Composition / Information on Ingredients
1 - Pyrenebutanoic acid
Molecular Formula: C20H16O2
Molecular Weight: 288.3
CAS Number: 3443-45-6
Hazards Identification
Warning! Causes respiratory tract irritation.
Causes eye and skin irritation.
FIRST AID MEASURES
Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give
oxygen.
Ingestion: If swallowed, wash out mouth with water provided person is
conscious. Call a physician.
Skin: In case of contact, immediately wash skin with soap and
copious amounts of water.
Eyes: In case of contact, immediately flush eyes with copious
amounts of water for at least 15 minutes.
AnaSpec, Inc. ?2149 O'Toole Ave, Suite F ?San Jose, CA95131
800-452-5530 ?408-452-5055 ?Fax 408-452-5059 ?service@anaspec.com ?www.anaspec.com
Fire Fighting Measures
Extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Special firefighting procedures: Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and eyes.
Accidental Release Measures
Avoid dust formation.
Do not let product enter drains.
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Handling and Storage
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Keep container tightly closed in a dry and well-ventilated place.
Exposure Controls / Personal Protection
Wear appropriate gloves, protective clothing and eyewear and follow safe laboratory practices.
Physical and Chemical Properties
Form: Powder
Odor: Not determined
pH: Not determined
190-195 0C
Melting Point:
Flash Point: Not determined
Stability and Reactivity
Dangerous Products of Decomposition: Carbon monoxide, carbon dioxide
Stability: Stable under recommended storage conditions.
Conditions/Materials to avoid: Strong oxidizing agents, excess heat
Toxicological Information
Causes eye and skin irritation.
Route of Exposure: May be harmful by inhalation, ingestion, or skin absorption.
Toxicity: To the best of our knowledge, the chemical, physical, and
Toxicological properties have not been thoroughly
investigated.
Ecological Information
Do not allow product to reach ground water, water course, or sewage system.
Disposal Considerations
Consult local, state or national regulations for proper disposal.
Transport Information
DOT (US): This substance is considered to be non-hazardous for
transport.
AnaSpec, Inc. ?2149 O'Toole Ave, Suite F ?San Jose, CA95131
800-452-5530 ?408-452-5055 ?Fax 408-452-5059 ?service@anaspec.com ?www.anaspec.com
Regulations
TSCA status: CAS# 3443-45-6 is listed on the TSCA inventory
Risk Statement: 36/37/38
Safety Statement: 26-28-37/39
SARA 313: Not listed
Hazard Code: Xi
Other Information
This material is sold for research purposes only. It is not intended for food, drug, household, agricultural or
cosmetic use. A technically qualified individual experienced in handling potentially hazardous chemicals must
supervise its use. The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. Users should make independent decisions regarding completeness of the
information based on all sources available. Anaspec shall not be held liable for any damage resulting from
handling or from contact with the above product.
AnaSpec, Inc. ?2149 O'Toole Ave, Suite F ?San Jose, CA95131
800-452-5530 ?408-452-5055 ?Fax 408-452-5059 ?service@anaspec.com ?www.anaspec.com
|