Product Name: Cold Ster. Height Gauge
Part Number: 97-999-12 (97-999-22)
MATERIAL SAFETY DATA SHEET
____________________________________________________________________________________
SECTION I 鈥? Scope
____________________________________________________________________________________
Device Name Catalog # Stainless Steel Type
Cotton College Plier OT-205 AISI-410
Rubber Dam Clamp Forceps OT-101 AISI-410
Mosquito Hemostat OT-027 AISI-410
Schure Band Seater Scaler OT-2100 AISI-410
Bracket Placement Gauge SS OT-000-SS AISI-410
Mathieu Hemostat OT-8015 & OT-8015N AISI-410
Mershon Band Pusher OT-206 AISI-410 & AISI-304
Bond Placement Instrument OT-203 & OT-204 AISI-410
Mirror Handle 24-009-00 AISI-410
Sickle Style Cement/Adh. Remover OT-2102 AISI-410 & AISI-308
Ligature Director OT-2104 AISI-420 & AISI-308
Twirlon Ligature OT-207 AISI-410
Distal Bender OT-300 & OT-330 AISI-410
Explorer OT-2105 AISI-304 & AISI-308
Niti Chilling Instrument OT-2000 AISI-304
Positive Positioner OT-2222 Aluminum
Bracket Height Gauges OT-2118-SS, OT-2122 Aluminum
Mirror Heads Nos. 4 & 5 24-63-02 AISI-304
Impression Trays Perforated/Non-perforated AISI-304
____________________________________________________________________________________
SECTION II 鈥? Material
____________________________________________________________________________________
The products mentioned above are made of stainless steel type AISI-410, AISI-420, AISI-304, AISI-308 and Aluminum.
The type of steel is selected such that:
鈥? Proper hardness is achieved.
鈥? Heat treatment & machining are possible.
鈥? Rust and corrosion are prevented.
____________________________________________________________________________________
SECTION III 鈥? Material Compositional Information
____________________________________________________________________________________
____________________________________________________________________________________
SECTION IV 鈥? Manufacturing
____________________________________________________________________________________
All products are manufactured for Ortho Technology.
_ __________________________________________________________________________________
SECTION V 鈥? Maintenance
____________________________________________________________________________________
No maintenance is required with the exception of proper cleaning and sterilization.
____________________________________________________________________________________
SECTION VI 鈥? Restricted Shelf Life
____________________________________________________________________________________
These products do not have a restricted shelf life.
____________________________________________________________________________________
SECTION VII 鈥? Mechanical Forces During Use
____________________________________________________________________________________
No such forces act on the devices that may cause malfunction, breakage, or defect during a procedure. The material and
functional strength of the devices are much higher than is required. In this case, the governing consideration is rust, not
strength.
____________________________________________________________________________________
SECTION VIII 鈥? Life Time of the Devices
____________________________________________________________________________________
The following factors determine the lifetime of the devices:
鈥? Quality of the stainless steel
鈥? Frequency of the use
鈥? Environmental factor (i.e. contact with corrosive agents)
鈥? Care in use
Only high quality imported stainless steel that is capable of performing under normal or expected conditions is used.
However, the devices should be discarded when there is any indication of rusting.
____________________________________________________________________________________
SECTION IX 鈥? Re-usable Devices
____________________________________________________________________________________
All devices are intended to be re-usable.
____________________________________________________________________________________
SECTION X 鈥? Identification of Possible Hazards
____________________________________________________________________________________
There is no known energy, biological, environmental, health hazards and reaction with oral and paraoral structures, no
spilling and leakage is observed, no toxicity if properly sterilized. Nice handling and proper storage after use is essential for
the long life of the device.
____________________________________________________________________________________
SECTION XI 鈥? Hazards from Functional Failure
____________________________________________________________________________________
There are no known hazards associated with functional failure, maintenance and aging but care in use is essential.
____________________________________________________________________________________
SECTION XII 鈥? Special Protection Information
____________________________________________________________________________________
No special protection procedure is required.
____________________________________________________________________________________
|