Material Safety Data Sheet BONDING WAX
CLEANING POWDER
Date prepared: January 2003 Date revised: N/A (first issue)
0CON-177
1. Identification of the Substance/Preparation and the Company/Undertaking
Bonding Wax Cleaning Powder
Substance or preparation trade name:
0CON-177
Unique reference number(s):
Company/undertaking name & address: Logitech Ltd.,
Erskine Ferry Road, Old Kilpatrick, Glasgow G605EU, Scotland,
UK
(+44) 1389 875444
Telephone:
As above
Emergency telephone number:
2. Composition
The ingredients in Bonding Wax Cleaning Powder are non-hazardous. The specific
Substance:
chemical identities are being with-held as a trade secret (29 CFR 1910.1200(I)).
3. Hazards Identification
No identified medical conditions are known to be aggravated or enhanced by exposure. The ingredients in
this product do not have any known listed occupational exposure levels which apply.
No ingredients in this product are listed or suspected carcinogens (National Testing Program, International
Agency for Research on Cancer, or OSHA)
4. First Aid Measures
Slight to moderate irritant. May cause slight dizziness. Remove
Inhalation:
to fresh air.
Slight to moderate irritant. Skin dermatitis. Flush repeatedly with
Skin contact:
water.
Slight to moderate irritant. Eye redness. Flush repeatedly with
Eye contact:
water.
Contact physician. Drink large amounts of water and do not
Ingestion:
induce vomiting. Swallowing large quantities may cause nausea,
diarrhea, and abdominal pain.
5. Fire-Fighting Measures
Not applicable - non-flammable.
Suitable extinguishing media:
Not applicable - non-flammable.
Special fire fighting procedures:
Not applicable - non-flammable.
Unusual fire and explosive conditions:
BONDING WAX CLEANING POWDER
Material Safety Data Sheet for Page 1 of 4
BONDING WAX
Material Safety Data Sheet CLEANING POWDER
Date prepared: January 2003 Date revised: N/A (first issue)
6. Accidental Release Measures
Sweep up powder spills and dispose to a municipal waste
Methods for cleaning:
container. The spill area should be mixed with water and sent to
the sewer.
7. Handling and Storage
Wear suitable protective clothing. Glasses or goggles and nitrile
Handling:
or neoprene protective gloves are required. Additional
equipment may include a uniform or apron. Breathing dust or
mist may irritate the nose and throat.
Keep storage container tightly closed. Store in cool, dry, well
Storage:
ventilated area or cabinet. Isolate from incompatibles such as
corrosives, oxidisers, or strong reducing agents.
8. Exposure Controls
No special requirements under ordinary conditions of use and
Ventilation:
with adequate ventilation.
Not required under conditions of normal use. If dust or mist is
Respiratory protection:
generated when handling material use a NIOSH approved
respirator.
Use impervious synthetic rubber gloves.
Hand protection:
Apron / uniform.
Skin protection:
Wear plastic face shield or splash proof safety goggles.
Eye protection:
9. Physical and Chemical Properties
Off white, free flowing powder.
Appearance:
None.
Odour:
N/A
Boiling point:
N/A
Melting point:
N/A
Flashpoint (掳C):
N/A
Closed cup / open cup
N/A
Flammability (gas/solid):
N/A
Explosive properties:
N/A
Oxidising properties:
0%
Percent volatile:
N/A
Vapour density (Air-1):
BONDING WAX CLEANING POWDER
Material Safety Data Sheet for Page 2 of 4
BONDING WAX
Material Safety Data Sheet CLEANING POWDER
Date prepared: January 2003 Date revised: N/A (first issue)
1.01
Specific gravity (water=1):
0-10%, complete at <40 deg C.
Solubility (water):
11-12
pH of 1% w/w in H2O:
10. Stability and Reactivity
Stable. The Bonding Wax Cleaning Powder is non-reactive and
Stability:
non-corrosive. It is stable under normal operating temperatures
expected in manufacturing processes.
Will not occur.
Hazardous polymerisation:
Flame or other sources of ignition.
Conditions to avoid:
Oxides of carbon monoxide, carbon dioxide and nitrogen.
Decomposition or byproducts:
Strong acids, strong oxidisers, strong reducing agents.
Incompatibility:
11. Toxicological Information
Concise description of toxicological properties follows, including any special effects of constituents:
This material should not represent a hazard under normal
Inhalation:
conditions.
Remove contaminated clothing. Slight irritational value.
Skin contact:
Flush eyes with large amounts of water. If material is hot, treat
Eye contact:
for thermal burns and take victim to hospital.
May result in nausea, diarrhea, abdominal pain and dizziness if
Ingestion:
taken in large quantities. Call a physician and do not induce
vomiting.
Contains only non-hazardous materials which are not regulated
Chronic effects:
under the OSHA Hazard Communication Standard or SARA Title
III.
12. Ecological Information
The product is non-reactive and non-corrosive. It is stable under
Mobility:
normal operating temperatures expected in manufacturing
processes.
13. Disposal Considerations
Waste Bonding Wax Cleaning Powder does not contain RCRA
Waste management:
regulated materials nor does it exhibit any RCRA regulated
characteristics. It is completely biodegradeable.
BONDING WAX CLEANING POWDER
Material Safety Data Sheet for Page 3 of 4
BONDING WAX
Material Safety Data Sheet CLEANING POWDER
Date prepared: January 2003 Date revised: N/A (first issue)
Provided the Bonding Wax Cleaning Powder is not contaminated
Sewer discharge:
with any regulated materials, the waste may be sent to the sewer
where treatment at a local Publicly Owned Treatment Works
(POTW) is performed via biodegradation during secondary
(biological) treatment. Approvals should be received prior to
discharge.
14. Transport Information
Special carriage precautions in carriage N/A
(on-site or externally):
N/A
Classification data:
15. Regulatory Information
No components in the Bonding Wax Cleaning Powder are listed
Supply label information:
under CERCLA or SARA Title III for RQs or TPQs (40 CFR 302.4,
355). This product contains no levels of listed materials found to
cause cancer, birth defects, or other reproductive harm requiring
warning (Proposition 65).
NOTE: THIS DATA SHEET DOES NOT CONSTITUTE A USER鈥橲 ASSESSMENT OF WORKPLACE
RISK AS REQUIRED BY HSW ACT, COSHH, MANAGEMENT OF HEALTH AND SAFETY AT WORK
REGULATIONS, OR OTHER HEALTH AND SAFETY LEGISLATION.
16. Other Information
Do not store or transport near heat sources.
Recommendations/restrictions:
Cleaning bonding wax from substrates.
Use:
As supplied.
Sources of key data used to compile
Safety Data Sheet:
N/A = Not Applicable
Abbreviations:
The data contained in this Safety Data Sheet has been supplied as required by the Chemicals (Hazard
Identification and Packaging) Regulations 1993, as amended, for the purpose of protecting the health and
safety of industrial and commercial users who are deemed capable of understanding and acting on the
information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on
the information.
BONDING WAX CLEANING POWDER
Material Safety Data Sheet for Page 4 of 4
|