Revised: 11/1/06
MATERIAL SAFETY DATA SHEET
Fragranced Cellulose Acetate Plastic Pellets
Auracell?CA
SECTION I
Chemical Product & Company
Product Name: Fragranced Cellulose Acetate Plastic Pellets
Chemical Name: N/A
Synonym(s) Auracell? Auracell?CA
Formula / Product: Various Formulations
Manufacturer: Rotuba Extruders, Inc.
1401 Park Avenue South
Linden, NJ 07036-1698 (USA)
For Information: Call (908) 486-1000, EST Monday through Friday
9:00 AM to 5:00 PM
Information Date: 10/16/96
Molecular Weight: N/A
Product Use: Plastic
SECTION II
Product Component Data
Components Approx. Weight % CAS Registry #
Cellulose Acetate > 50 9004-35-7
Diethyl Phthalate* 0 - 40 84-66-2
Triacetin* 0 - 40 102-76-1
Diacetin* 0 - 40 25395-31-7
Hexylene Glycol < 15 107-41-5
Fragrance Components** < 30 Proprietary
Colorants / Additives < 10 Proprietary
(This is a general range of formulations. Specific certificates of analysis are available upon request.)
* Specific formulations may be specified with either DEP or Triacetin, or a mixture of these plasticizers.
**MSDS for the fragrance component for a specific formulation from the fragrance manufacturer can be supplied upon request.
SECTION III
Hazards Identification
HMIS?Hazard Rating: Health ?1, Flammability ?1, Chemical Reactivity ?0
Product is in solid pellet form. Processing by user will require melting at high temperatures, thereby exposing
workers to potential thermal burns. Appropriate PPE is recommended.
Revision date: 2/1/06 Rotuba Extruders, Inc.
Cellulose Acetate Plastic Pellets MSDS 1401 Park Avenue South
Page 1 of 3 Linden, NJ 07036
Tel (908) 486-1000
Fax (908) 486-0874
Custom Compounders and Extruders info@rotuba.com
www.rotuba.com
SECTION IV
First-Aid Measures
If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Inhalation:
Solid particles may scratch the eye.
Eyes:
If molten material contact the eye, immediately flush with plenty of water for at least 15 minutes.
Get medical attention immediately.
If burned by molten material, cool as quickly as possible. Do not remove or peel material from the
Skin:
skin. Get medical attention.
Ingestion of plastic pellets should be directed to a medical practitioner for advice.
Ingestion:
Burns should be treated as thermal burns.
Note to Physicians:
SECTION V
Fire Fighting Measures
Not applicable, combustible solid
Flash Point:
Not applicable.
Lower and Upper Explosive Limit:
Water spray or dry chemical.
Extinguishing Media:
Wear self-contained breathing apparatus and protective clothing.
Special Fire Fighting Procedure:
None.
Unusual Fire & Explosion Hazards:
SECTION VI
Accidental Release
Sweep or scoop up and remove any spilled pellets. Collect and contain for salvage or disposal. Observe all Federal,
State, and local laws concerning health and environment.
SECTION VII
Handling & Storage
Keep container closed.
Storage:
Avoid contact with molten material. Avoid prolonged breathing of vapor
Personal Precautionary Measures:
from heated material. Process with only adequate ventilation.
SECTION VIII
Exposure Controls / Personal Protection
US ACGIH TLV TWA: 5mg/m3
Diethyl Phthalate
US NIOSH: REL: 5mg/m3
US ACGIH TLV 25ppm TWA: 121mg/m3
Hexylene Glycol
US NIOSH: REL: 25ppm
Good general ventilation. Ventilation rates should be matched to the conditions. Use process
Ventilation:
enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended
exposure limits.
If engineering controls do not maintain airborne concentrations below
Respiratory Protection:
recommended exposure limits, an approved respirator must be worn.
Eye Protection: Wear a face shield or approved safety glasses when working with molten materials.
Skin Protection: Wear gloves and long sleeves to protect against thermal burns when material is heated.
Revision date: 2/1/06 Rotuba Extruders, Inc.
Cellulose Acetate Plastic Pellets MSDS 1401 Park Avenue South
Page 2 of 3 Linden, NJ 07036
Tel (908) 486-1000
Fax (908) 486-0874
Custom Compounders and Extruders info@rotuba.com
www.rotuba.com
SECTION IX
Physical and Chemical Data
Solid Pellet
Physical Form
Varies with formulation
Color
slight
Odor
>1
Specific Gravity
N/A
Vapor Pressure
Negligible
Solubility in Water
N/A
pH
N/A, combustible solid
Flash Point
SECTION X
Stability & Reactivity
Stability: Stable
Incompatibility: Material can react with strong oxidizing agents.
Will not occur.
Hazardous Polymerization:
Hazardous Combustion Products: Carbon dioxide, carbon monoxide.
SECTION XI
Toxicological Information
An independent toxicological review has been conducted of representative formulas of CA based Auracell?
including the polymer, plasticizers, stabilizers, and representative fragrance / pigment types. In addition,
representative formulation samples were also submitted for oral toxicity and dermal irritation testing.
- The representative samples submitted for acute oral toxicity testing indicate the formula is non-toxic as defined by
the Consumer Product Safety Commission.
- The representative samples submitted for dermal irritation testing under standard OECD protocols indicate the
formula is non-irritating when subjected to prolonged (24 hour) skin contact.
No ingredients or components contained within this product at greater than 0.1% are classified as carcinogenic.
It is recommended that Auracell?formulations and ingredients be specifically evaluated on a case-by-case basis for
specific applications and intended uses to ensure fitness for use.
SECTION XII
Ecological Information
This material has not been tested for environmental effects.
Revision date: 2/1/06 Rotuba Extruders, Inc.
Cellulose Acetate Plastic Pellets MSDS 1401 Park Avenue South
Page 3 of 3 Linden, NJ 07036
Tel (908) 486-1000
Fax (908) 486-0874
Custom Compounders and Extruders info@rotuba.com
www.rotuba.com
|