MSDS of Vamulsion PAI-1075 Page 1 of 5.
Ref. No 0218A01 Div 49 msds Vamulsion PAI-1075 Jubilant Organosys Limited
Date of Issue: 23 September 2005
Revision: 00
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT & MANUFACTURER'S DETAILS
PRODUCT NAME : Vamulsion PAI-1075
MANUFACTURER
FACTORY & REGISTERED OFFICE: HEAD OFFICE:
Jubilant Organosys Limited, Jubilant Organosys Limited
Bhartiagram, Gajraula Plot 1-A, Sector 16-A,
District: Jyotiba Phuley Nagar Institutional Area, Noida,
Uttar Pradesh-244223 , India Uttar Pradesh-201301 India.
PHONE NO: 91-5924-252351/53-60 PHONE NO: +91-120-2516601
Contact Department-Safety: Extension 298 Contact department: EHS
FAX NO : 91-5924-252352 FAX NO : +91-120-2516629
EMERGENCY PHONE: +91-5924-268141 Email: support@jubl.com
2. CHEMICAL IDENTIFICATION
Chemical Identification: Vamulsion PAI-1075 (Packaging Adhesive.)
Chemical ID CAS RN EINECS Concentration
1) Polyvinyl acetate 9003-20-7 - 47-48%
2) Polyvinyl alcohol 9002-89-5 - 2-3%
3) Biocide* 55965-84-9 0.1-0.25%
4) Water 7732-18-5 40-50%
5) Vinyl acetate (VAM) 108-05-4 203-545-4 <0.5%
Note
?CAS RN 55965-84-9 1-5% 3:1:: CAS RN 26172-55-4 (MCI)::2682-20-4 (MI)
Chemical ID ACGIH TLV MAK Ger. NFPA
1) Polyvinyl acetate not listed Not listed H0 F1 R0
TWA 10mg/m3, 8Hr
2) Polyvinyl alcohol Not available H0 F1 R0
TWA 0.05mg/m3
3) Biocide
(26172:55-4)
4) Water
5) VAM TWA 10ppm, 8 Hr NIOSH REL 4ppm H2, F3, R2
Chemical ID EU Pictogram R phrases
1) Polyvinyl acetate Nil Nil
2) Polyvinyl alcohol Nil Nil
30 Biocide C, N Xn;R20/21/22 - C; R34 - Xi; R43 - N; R51/53
4) Water Nil Nil
5) VAM F R11
MSDS of Vamulsion PAI-1075 Page 2 of 5.
Ref. No 0218A01 Div 49 msds Vamulsion PAI-1075 Jubilant Organosys Limited
Date of Issue: 23 September 2005
Revision: 00
3. HAZARD IDENTIFICATION & HEALTH HAZARD
? Eye: May cause irritation.
? Skin: May cause sensitization by skin contact.
? Ingestion: May cause nausea and vomiting if ingested in high amounts.
? Inhalation: May cause irritation to the respiratory tract.
FIRST AID MEASURES
4.
Eye Contact: Wash thoroughly with running water. Gets medical advice if irritation develops
Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops.
Ingestion: In case of large amount of ingestion, give water to drink and get medical advice
Inhalation: Remove to fresh air and get medical attention for any breathing difficulty.
Note to physician: Treat symptomatically.
5. FIRE FIGHTING MEASURES
Flash Point: This product is classified as non-combustible but like any organic chemical will burn in
presence of a fire.
Extinguishing media: Water spray, carbon dioxide, dry chemical powder, and chemical foam.
Special fire fighting procedures: As in any chemical fire wear a self-contained breathing apparatus
MSHA/NIOSH (or equivalent approved) and full protective gloves. Do not permit the chemical/ fire
effluent to enter the environment as far as possible.
Unusual fire and explosion hazard: Toxic and irritating fumes may be released during a fire.
6. ACCIDENTAL RELEASE MEASURES
?General Information :
Use proper personal protective equipment as indicated in Section 8
?Spills / Leaks :
?Absorb spill with inert material (e.g. sand or earth),
?Place in suitable approved container.
?Clean up area.
?Prevent entry into the environment, water bodies or drains.
?Provide ventilation.
7. HANDLING AND STORAGE
? Handling : Use protective clothing, gloves and goggles/face mask. Wash thoroughly after use.
Storage : Store in a cool, dry place (20-30o C recommended). Store in a closed container.
?br>
MSDS of Vamulsion PAI-1075 Page 3 of 5.
Ref. No 0218A01 Div 49 msds Vamulsion PAI-1075 Jubilant Organosys Limited
Date of Issue: 23 September 2005
Revision: 00
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
? Exposure controls: As appropriate to the situation and quantity handled. Eye-wash and
emergency shower facilities are recommended. Mechanical exhaust is recommended.
? Personal Protection
?Gloves: Butyl rubber, viton and compatible gloves required.
?Clothing: Suitable protective clothing is required. Plastic apron and boots appropriate for
industrial usage.
?Eye: Goggles or face shield is recommended. Wear appropriate protective eyeglasses or
chemical safety goggles as described by OSHA's eye and face protection regulations in 29
CFR 1910.133 or European Standard EN166.
?Respirator: May be considered if conditions demand. In event use only an approved respirator
as per an approved respirator program.
? Exposure Limits
?Restricted to professional users. Check local regulations.
?See section 2.
9. PHYSICOCHEMICAL PROPERTIES & FIRE/ EXPLOSION HAZARD
APPEARANCE :.Milky white emulsion
SOLIDS : 50?
BROOKFIELD VISCOSITY : 300-500poise
EXPLOSIVE LIMITS
UEL : Not available
LEL :.Not available
FLASH POINT : Not available
pH (30oC) : 4.5-5.5
FLAMMABILITY :
FLAMMABLE MATERIAL : No
FILM PROPERTIES (100 MICRON) : Slightly hazy
(Wet on glass plate)
10. STABILITY AND REACTIVITY
? Stability: The product is stable under suggested storage conditions for at least 6 months without
significant change in any property.
? Conditions to Avoid: Exposure to direct sunlight and frost to be avoided. Store at 20-30 deg C.
? Hazardous Decomposition Products: May emit toxic and irritant fumes in event of a fire.
? Incompatibilities: Strong oxidizing substances, strong bases.
? Hazardous Polymerization: Not expected.
MSDS of Vamulsion PAI-1075 Page 4 of 5.
Ref. No 0218A01 Div 49 msds Vamulsion PAI-1075 Jubilant Organosys Limited
Date of Issue: 23 September 2005
Revision: 00
11. TOXICOLOGICAL INFORMATION
? No adverse health effects are expected with this material if used in accordance with this msds.
? The mixture has not been tested for its toxic effects. These are assessed from the components.
? ACUTE EFFECTS:
?Ingestion: Large amounts may cause nausea and vomiting.
?Eye, skin, inhalation: May cause irritation and sensitization.
? CHRONIC EFFECTS: Sensitization effects. Sensitive individuals to be identified
? TOXICITY:
Chemical CAS % RTECS LD50 Oral Rat
Single ingredient
?1) Polyvinyl acetate 9003-20-7 45-48% AK0920000 >25gm/kg
?2) Polyvinyl alcohol 9002-89-5 2.5-3.0% TR8100000 >20gm/kg
?3) Biocide 55965-84-9 0.25% NX8157050 2500mg/kg (calc.RTECS.data)
?4) Water 7732-18-5 QS (quantity sufficinet)
?5) VAM
?ORL RAT LD50 : Not determined for mixture
? CARCINOGENICITY, MUTAGENICITY, REPRODUCTIVE TOXICITY
?Polyvinyl acetate: IARC Group 3: The agent (mixture or exposure circumstance) is not
classifiable as to its carcinogenicity to humans.
?Polyvinyl Alcohol: IARC Group 3: The agent (mixture or exposure circumstance) is not
classifiable as to its carcinogenicity to humans.
?Biocide: Ames mutagenicity test: Positive (Ref.:ENVIRON. MOL. MUTAGEN. 28(2):127-132, 1996).
Additional references in RTECS).
? VAM: IARC: Group 2B Vinyl acetate is possibly carcinogenic to humans.
12. ECOLOGICAL INFORMATION
? At concentration levels in the mixture the biocide is not classified as a marine pollutant.
? Do not permit this chemical to enter environmental bodies.
? Avoid contaminating waterways.
13. DISPOSAL CONSIDERATION
? Dispose of this chemical in accordance with local and federal law as applicable through a licensed
waste contractor or as applicable.
14. TRANSPORT INFORMATION
Not regulated under IMO/IMDG/US DOT/IATA
15. REGULATORY INFORMATION
European Information:
Pictogram: Xi Indication of danger: Irritant
Risk Phrases
?R43 May cause sensitization by skin contact.
MSDS of Vamulsion PAI-1075 Page 5 of 5.
Ref. No 0218A01 Div 49 msds Vamulsion PAI-1075 Jubilant Organosys Limited
Date of Issue: 23 September 2005
Revision: 00
15. REGULATORY INFORMATION
Safety Phrases
?S 24/25 Avoid contact with skin and eyes.
?S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
US Regulatory Information:
Polyvinyl acetate Polyvinyl alcohol MCI MI VAM
9003-20-7 9002-89-5 26172-55-4 2682-20-4 108-05-4
TSCA 8(b) present present present present present
CAA Section 112 (r ) chemical no no no no yes
CAA Threshold lbs n.ap. n.ap. n.ap. n.ap. 15,000
CERCLA chemical no no no no yes
CERCLA RQ lbs n.ap. n.ap. n.ap. n.ap. 5000
EPCRA EHS chemical no no no no yes
EHS Threshold planning lbs n.ap. n.ap. n.ap. n.ap. 1000
EPCRA 313 no no no no yes
RCRA code n.av. n.av. n.av. n.av. n.av.
Notes: n.ap.:not applicable; n.av.:not available
16. OTHER INFORMATION
Information contained in this MSDS is believed to be correct but no representation, guarantee or
warranties of any kind are made as to its accuracy, suitability for a particular application or results to
be obtained from them. This MSDS shall be used as a guide only. JUBILANT ORGANOSYS
LIMITED makes no warranties expressed or implied of the adequacy of this document for any
particular purpose.
Document Name: 0218A01 Div 49 msds Vamulsion PAI-1075
Date: September 23, 2005
Revision Number: 00
|