Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 Tin Metal, granular and mossy
CAS  
:
 7440-31-5
SYNONYMS  
:
 

Section 1 - Chemical Product and Company Identification

MSDS Name: Tin Metal, granular and mossy
Catalog Numbers: S71214-1, T123-500, T127-500, T128-500, T131-1LB
Synonyms:
Metallic Tin; Elemental Tin; Stannum; C.I. 77860.
Company Identification:

              Fisher Scientific
              1 Reagent Lane
              Fair Lawn, NJ 07410
For information, call:
201-796-7100
Emergency Number:
201-796-7100
For CHEMTREC assistance, call:
800-424-9300
For International CHEMTREC assistance, call:
703-527-3887

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
7440-31-5 Tin 100 231-141-8

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: silver white solid.
Caution! May cause respiratory and digestive tract irritation. May cause mechanical eye and skin irritation. Inhalation of fumes may cause metal-fume fever. May cause central nervous system effects.
Target Organs: Central nervous system.


Potential Health Effects
Eye: May cause eye irritation.
Skin: Prolonged and/or repeated contact may cause irritation and/or dermatitis.
Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingested inorganic tin exhibits only moderate toxicity due to poor absorption and rapid tissue turnover. Ingestion of large amounts may cause gastrointestinal irritation, nausea, cramps, vomiting and diarrhea. May interfere with various enzyme systems. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver.
Inhalation: Dust is irritating to the respiratory tract. Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count. When inhaled as a dust or fume, may cause benign pneumoconiosis.
Chronic: Prolonged or repeated skin contact may cause dermatitis. Chronic exposure to tin oxide dusts and fumes may result in stannosis (benign pneumoconiosis).

Section 4 - First Aid Measures


Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medi cal aid.
Skin: Get medical aid if irritation develops or persists. Wash clothing before reuse. Flush skin with plenty of soap and water.
Ingestion: Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use extinguishing media appropriate to the surrounding fire. Substance is noncombustible.
Extinguishing Media: Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.
Flash Point: Not available.
Autoignition Temperature: 430 deg C ( 806.00 deg F)
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 1; Flammability: 1; Instability: 1

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - Handling and Storage


Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage: Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
Tin 2 mg/m3 TWA 2 mg/m3 TWA 100 mg/m3 IDLH none listed

OSHA Vacated PELs: Tin: 2 mg/m3 TWA
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Solid
Appearance: silver white
Odor: none reported
pH: Not applicable.
Vapor Pressure: 1 mm Hg @ 1492 deg
Vapor Density: Not available.
Evaporation Rate:Not applicable.
Viscosity: Not applicable.
Boiling Point: 2507 deg C
Freezing/Melting Point:231.9 deg C
Decomposition Temperature:Not applicable.
Solubility: Slightly soluble in hot water.
Specific Gravity/Density:7.31
Molecular Formula:Sn
Molecular Weight:118.69

Section 10 - Stability and Reactivity


Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials: Halogens, nitric acid, sodium peroxide, sulfur, copper nitrate, hydrochloric acid, tin chloride, potassium peroxide.
Hazardous Decomposition Products: Irritating and toxic fumes and gases, tin/tin oxides.
Hazardous Polymerization: Will not occur.

Section 11 - Toxicological Information


RTECS#:      
CAS# 7440-31-5: XP7320000
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 7440-31-5: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: Tumors were observed at the site of application when implanted into in rats (TDLo=395 mg/kg) and mice (TDLo=840 gm/kg), according to RTECS.
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found
Neurotoxicity: No information found
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: Not Regulated Not Regulated
Hazard Class:
UN Number:
Packing Group:

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 7440-31-5 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 7440-31-5 can be found on the following state right to know lists: California, New Jersey, Pennsylvania, Minnesota, Massachusetts.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
      Not available.
Risk Phrases:


Safety Phrases:


WGK (Water Danger/Protection)

     CAS# 7440-31-5: No information available.
Canada - DSL/NDSL
     CAS# 7440-31-5 is listed on Canada's DSL List.
Canada - WHMIS
     This product has a WHMIS classification of D2B.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List
     CAS# 7440-31-5 is listed on the Canadian Ingredient Disclosure List.

Section 16 - Additional Information

MSDS Creation Date: 5/04/1999
Revision #8 Date: 2/13/2008

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
Tert.-Butylbenzene, 99% 98-06-6
1,3-Dichloro-2-fluorobenzene, 98+% 2268-05-5
BENZAMIDE (PRACT) 55-21-0
Thallium (I) Acetate 563-68-8
N-n-Butyldiethanolamine, 98% 102-79-4
Thiosalicylic Acid (Pract), 90% (Titr.) 7732-18-5
3-Hydroxypicolinamide, 98+% 933-90-4
Dodecyltrimethylammonium chloride 112-00-5
Cyclohexene Sulfide, tech., ca.85% 286-28-2
1-(3,4-Dichlorophenyl)-1-propanone, 99% 6582-42-9
4-Pentylphenol, 99% (GC) 14938-35-3
4-IODOBENZOIC ACID, 93% (TITR.) 619-58-9
Methyl-Beta-D-Glucopyranoside Hemihydrate ,99% 709-50-2
N-Phenylglycine Ethyl Ester, 99% (Titr.) 2216-92-4
1-Phenylpyrazole, 99% (gc) 1126-00-7
2-Amino-3-Nitropyridine, 99% 4214-75-9
Thiamine 67-03-8
Thioacetamide, reagent ACS, 99+% 62-55-5
1-Dimethylamino-2-propanol, 99% 108-16-7
2,5-Dichloro-p-benzoquinone 615-93-0
2,3-Dimethyl-2-butanol, 98% 594-60-5
Methylmalonic Acid, 96% 516-05-2
5-Aminovaleric Acid, 97% 660-88-8
Palladium on Barium Sulfate (5% Pd) 7440-05-3
Mercaptoacetic acid 68-11-1
1,3,5-Trimethoxybenzene, 99% 621-23-8
5-Methyl-2-hexanone 99% 110-12-3
Puromycin dihydrochloride hydrate 58-58-2
tert-Butyl ethyl ether 637-92-3
p-Anisidine 90-04-0
Harmine Hydrochloride Hydrate 343-27-1
3-Nonanone, 98% 925-78-0
N-Ethylcarbazole, 98.5% 86-28-2
(s,s)-jacobsen catalyst, 98% 135620-04-1
Thiourea 62-56-6
2-Chloro-5-fluoronitrobenzene, 99+% 345-17-5
2,4-Dimethylanisole, 99% 6738-23-4
(Methyl Sulfoxide)-D6, 99.9 Dtom % Deuterized 2206-27-1(Methyl Sulfoxide)-D6<-td>
Mucobromic acid, 99+% 488-11-9
Fast Blue RR Salt - Tetrafluoroborate 27766-45-6
Thymol 89-83-8
5-Methyl-3-phenylisoxazole-4-carboxylic acid, 99% 1136-45-4
Tin Metal, granular and mossy 7440-31-5
1-Dimethylamino-but-1-en-3-one, 99% (gc) 2802-08-6
Titanium(IV) oxide 13463-67-7
1,5-Diphenyl-3-pentadienone 538-58-9
Gitoxigenin 545-26-6
Quinaldine, 95% (GC) 91-63-4
Bromelain 9001-00-7
Titanium(IV) chloride 7550-45-0



HBCChem,Inc

Chemical Information Net Copyright Reserved