Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 Diphenyl diselenide, 99%
CAS  
:
 1666-13-3
SYNONYMS  
:
 Phenyl diselenide

Section 1 - Chemical Product and Company Identification
MSDS Name: Diphenyl diselenide, 99%
Catalog Numbers: AC177570000, AC177570050, AC177570250
Synonyms:
Phenyl diselenide
Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
1666-13-3 DIPHENYL DISELENIDE 99 216-780-2

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: slightly yellow solid.
The toxicological properties of this material have not been fully investigated.
Target Organs: Liver.


Potential Health Effects
Eye: May cause eye irritation.
Skin: May cause skin irritation.
Ingestion: Poison by ingestion. May cause liver damage. The toxicological properties of this substance have not been fully investigated.
Inhalation: The toxicological properties of this substance have not been fully investigated. May cause lung damage. Toxic if inhaled.
Chronic: Not available.

Section 4 - First Aid Measures


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately.
Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion: Get medical aid immediately. Wash mouth out with water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: Not available.
Autoignition Temperature: Not available.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: Not published.

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.

Section 7 - Handling and Storage


Handling: Do not breathe dust, mist, or vapor. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage: Store in a cool, dry place. Store in a tightly closed container.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
DIPHENYL DISELENIDE 0.2 mg/m3 TWA (as Se) (listed under Selenium compounds). 0.2 mg/m3 TWA (as Se, except Selenium hexafluoride) (listed under Selenium compounds).1 mg/m3 IDLH (as Se) (listed under Selenium compounds). 0.2 mg/m3 TWA (as Se) (listed under Selenium compounds).

OSHA Vacated PELs: DIPHENYL DISELENIDE: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties


Physical State: Solid
Appearance: slightly yellow
Odor: Stench
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point:61 - 63 deg C
Decomposition Temperature:Not available.
Solubility: insoluble
Specific Gravity/Density:Not available.
Molecular Formula:C12H10Se2
Molecular Weight:312.13

Section 10 - Stability and Reactivity


Chemical Stability: Not available.
Conditions to Avoid: Incompatible materials.
Incompatibilities with Other Materials: Oxidizing agents - reducing agents - halogens.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, selenium/selenium oxides.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 1666-13-3: JM9152500
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 1666-13-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Mutagenicity: EPA TSCA Section 8(b) CHEMICAL INVENTORYEPA TSCA TEST SUBMISSION (TSCATS) DATA BASE, JANUARY 1996
Neurotoxicity: No information available.
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: DOT regulated - small quantity provisions apply (see 49CFR173.4) SELENIUM COMPOUND NOS (DIPHENYL DISELENIDE)
Hazard Class: 6.1
UN Number: UN3283
Packing Group: II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 1666-13-3 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313
     This material contains DIPHENYL DISELENIDE (listed as Selenium compounds), 99%, (CAS# 1666-13-3) which is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
Clean Air Act:
     CAS# 1666-13-3 (listed as Selenium compounds) is listed as a hazardous      air pollutant (HAP).
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA. CAS# 1666-13-3 is listed as a Toxic Pollutant under the Clean Water Act.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 1666-13-3 can be found on the following state right to know lists: California, (listed as Selenium compounds), New Jersey, (listed as Selenium compounds), Pennsylvania, (listed as Selenium compounds), Minnesota, (listed as Selenium compounds).

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     T
Risk Phrases:

     R 23/25 Toxic by inhalation and if swallowed.
     R 33 Danger of cumulative effects.

Safety Phrases:

     S 20/21 When using do not eat, drink or smoke.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).
     S 28A After contact with skin, wash immediately with plenty of water
     .

WGK (Water Danger/Protection)

     CAS# 1666-13-3: No information available.
Canada - DSL/NDSL
     CAS# 1666-13-3 is listed on Canada's NDSL List.
Canada - WHMIS
     This product has a WHMIS classification of D2A.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List
     CAS# 1666-13-3 is listed on the Canadian Ingredient Disclosure List.

Section 16 - Additional Information

MSDS Creation Date: 9/02/1997
Revision #4 Date: 3/25/2008

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
Pinacyanol Chloride 2768-90-3
Diphenyl diselenide, 99% 1666-13-3
2-Imidazolidone (Pract) 120-93-4
4-Hydroxyquinazoline, 98% 491-36-1
Rhodium(III) Oxide Hydrate, ca 56% Rh 12036-35-0
2-Chloro-1H-benzimidazole, 97% 4857-06-1
4'-Fluoroacetophenone 403-42-9
2,5-Dithiobiurea, 99% 142-46-1
4-Methoxyphenacyl chloride 2196-99-8
3-Amino-o-cresol, 95% 53222-92-7
N-Methylformanilide, 99% 93-61-8
D(-)-amygdalin monohydrate, chr 29883-15-6
Aminoacetaldehyde diethyl acetal, 99% 645-36-3
1,4-Diethylbenzene, 98% 105-05-5
(para-aminophenyl)-(phenyl)-acetonitrile hydrochloride, 97% Not available
(R)-(+)-2-(2'-Carbomethoxyethyl)-2-methyl-cyclohexanone,98.5+% 94089-47-1
Diethyl maleate, ca.90%, remainder ca.10% diethyl fumarate 141-05-9
Itaconic anhydride, 98% 2170-03-8
Ethyl hexahydro-1H-azepine-1-propanoate tech., 90 % 6763-93-5
Methyl Cyanoacetate, 97+% 105-34-0
Bis(4-nitrophenyl)hydrogen phosphate, 98% (titr.) 645-15-8
Valeryl chloride, 98% 638-29-9
4-Chloro-1-butanol 928-51-8
Cerium(IV) sulfate hydrate, 99% 123333-60-8
Benzylamine hydrochloride, 99% 3287-99-8
Rhodium atomic absorption standard solution Not available
Cyclopropyl cyanide, 98% 5500-21-0
2-Bromo-2-nitro-1,3-propanediol, 98% 52-51-7
2-Adamantanone 700-58-3
1,1,1-Trifluoro-2,4-hexanedione 400-54-4
3,4-Dimethoxycinnamonitrile (Mixture of Cis and Trans) 6443-72-7
Acrylamide-bis premix 19:1, 5% concentration 110-26-9
Dibromomethane 74-95-3
2-Ethoxybenzamide, 97% 938-73-8
2-Methylpiperazine, 98% 109-07-9
4-Fluoro-3-nitroaniline, 99% 364-76-1
DL-Penicillamine, 99+% 52-66-4
N-Hydroxy-5-norbornene-2,3-dicarboximide, 99+% 21715-90-2
2,2'-Bipyridinium Chlorochromate, 97% 76899-34-8
4'-Bromo-2'-Fluoroacetanilide, 99+% 326-66-9
7-Bromoheptanenitrile 20965-27-9
trans-2-Decenal 3913-71-1
Dl-proline, 99% 609-36-9
Diethyl 2-acetylglutarate, 97% 1499-55-4
Dimethylphenylsilane, 98+% 766-77-8
N,N-Dimethyl-p-phenylenediamine monohydrochloride, 99% (Titr.) 2052-46-2
Cerium(III) chloride heptahydrate 18618-55-8
3',5'-Diacetyl-5-Iodo-2'-Deoxyuridine, 99+% 1956-30-5
Diethyl cyanophosphonate, 90-95% 2942-58-7
2-(P-Methoxybenzylamino)-Pyridine 52818-63-0



HBCChem,Inc

Chemical Information Net Copyright Reserved