Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 Chlorodiphenylphosphine, Tech., 95%
CAS  
:
 1079-66-9
SYNONYMS  
:
 Phosphinous Chloride, Diphenyl-.

Section 1 - Chemical Product and Company Identification
MSDS Name: Chlorodiphenylphosphine, Tech., 95%
Catalog Numbers: AC109130000, AC109130050, AC109130250, AC109131000
Synonyms:
Phosphinous Chloride, Diphenyl-.
Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
1079-66-9 Chlorodiphenylphosphine 95 214-093-2

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: clear light yellow to yellow liquid.
Danger! Water-reactive. Reacts violently and/or explosively with water, steam or moisture. Corrosive. Causes eye and skin burns. May ignite or explode on contact with moist air. Lachrymator (substance which increases the flow of tears). May cause severe respiratory tract irritation with possible burns. May cause severe digestive tract irritation with possible burns.
Target Organs: None.


Potential Health Effects
Eye: Causes eye burns. Lachrymator (substance which increases the flow of tears).
Skin: Causes skin burns.
Ingestion: May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation: May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.
Chronic: No information found.

Section 4 - First Aid Measures


Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion: Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: Do NOT use mouth-to-mouth resuscitation. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water reactive. Material will react with water and may release a flammable and/or toxic gas. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. May ignite or explode on contact with steam or moist air.
Extinguishing Media: Use dry sand or earth to smother fire. Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Do NOT get water inside containers. Contact professional fire-fighters immediately. Cool containers with flooding quantities of water until well after fire is out.
Flash Point: 138 deg C ( 280.40 deg F)
Autoignition Temperature: Not available.
Explosion Limits, Lower:N/A
Upper: N/A
NFPA Rating: (estimated) Health: 3; Flammability: 1; Instability: 2; Special Hazard: -W-

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Remove all sources of ignition. Provide ventilation. Do not expose spill to water. Do not get water inside containers.

Section 7 - Handling and Storage


Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not allow water to get into the container because of violent reaction. Avoid contact with skin and eyes. Keep container tightly closed. Avoid ingestion and inhalation. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage: Store in a cool, dry place. Keep container closed when not in use. Keep away from water. Corrosives area.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
Chlorodiphenylphosphine none listed none listed none listed

OSHA Vacated PELs: Chlorodiphenylphosphine: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Liquid
Appearance: clear light yellow to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: 7.6
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 320 deg C @ 760.00mm Hg
Freezing/Melting Point:Not available.
Decomposition Temperature:Not available.
Solubility: reacts
Specific Gravity/Density:1.2290g/cm3
Molecular Formula:C12H10ClP
Molecular Weight:220.64

Section 10 - Stability and Reactivity


Chemical Stability: Stable under normal temperatures and pressures. Combines vigorously or explosively with water.
Conditions to Avoid: Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 1079-66-9 unlisted.
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 1079-66-9: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. CORROSIVE LIQUID NOS (CHLORODIPHENYLPHOSPHINE)
Hazard Class: 8 8
UN Number: UN3265 UN1760
Packing Group: II II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 1079-66-9 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 1079-66-9 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     C
Risk Phrases:

     R 14 Reacts violently with water.
     R 34 Causes burns.

Safety Phrases:

     S 23 Do not inhale gas/fumes/vapour/spray.
     S 24/25 Avoid contact with skin and eyes.

WGK (Water Danger/Protection)

     CAS# 1079-66-9: 2
Canada - DSL/NDSL
     CAS# 1079-66-9 is listed on Canada's NDSL List.
Canada - WHMIS
     not available.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 9/25/1998
Revision #4 Date: 3/15/2007

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
5-tert-Butyl-m-xylene, 98% 98-19-1
2,4-Dibromophenol 615-58-7
Ytterbium(iii) oxide, 99% 1314-37-0
1,3-Indanedione, 97% 606-23-5
3-Ethoxypropionaldehyde diethyl acetal, 95% 7789-92-6
N-(Alpha, Alpha, Alpha-Trifluoro-M-Tolyl)Piperazine, 98%(Titr.) 15532-75-9
p-Bromoaniline 106-40-1
3-Hydroxy-3,7,11-Trimethyl-1,6,10-Dodecatriene, mixture of cis-trans, 96% 7212-44-4
N-(Gamma-L-Glutamyl)-Alpha-Naphthylamide Monohydrate, 99% 81012-91-1
Acridine Yellow, 98% (UV-Vis) 135-49-9
Dibutyltin oxide, 98% 818-08-6
Dimethyl 4-nitrophthalate 610-22-0
1-Octadecene, Tech., 90% 112-88-9
Dibenzyl Malonate, Tech., 90% 15014-25-2
3-O-methyldopamine hydrochloride, p.a. 1477-68-5
3-Hydroxybenzophenone, 99% 13020-57-0
2,5-Dichloronitrobenzene, 99% 89-61-2
Diphenylsilanediol 947-42-2
Allyl glycidyl ether, 99+ % 106-92-3
(+)-Dihydrocarvone, 98%, mixture of isomers 5524-05-0
Semicarbazide Hydrochloride,98% 563-41-7
3-Fluoro-4-nitrotoluene, 99+% 446-34-4
2,3-Dichloronitrobenzene, 99% 3209-22-1
N-(3-Bromo-2,4,6-Trimethylphenylcarbamoylmethyl)Iminodiacetic Acid, 98% 78266-06-5
(3R,4R)-(-)-D-Erythronolactone, 99.5+% 15667-21-7
2-Phenylcyclohexanone, 98% 1444-65-1
4,4'-Dimethoxystilbene, 97% 4705-34-4
Ethyl 2-(2-aminothiazol-4-yl)-2-hydroxyiminoacetate, predominantly syn 64485-82-1
Benzo[b]tellurophene, 96% FS-00001-1
Ethyl isocyanoacetate 2999-46-4
Chlorodiphenylphosphine, Tech., 95% 1079-66-9
4-Hydroxyephedrine hydrochloride 942-51-8
p-Toluoyl chloride, 98% 874-60-2
2,4-Difluoronitrobenzene, 99% 446-35-5
3-Ethylaniline, 98% 587-02-0
Hydroxypropyl-Betha-Cyclodextrin, 97+% (TLC), (on the dry substance) 94035-02-6
4-Chloro-3-nitrophenyl cyclopropyl ketone, 99+% 31545-26-3
Sodium Sulfanilate Hydrate, 97% 515-74-2
Bromopentafluorobenzene, 99% 344-04-7
Normal-Propyl Sulfoxide, Tech. Not available
p-Toluenesulfinic Acid, Sodium Salt, 98+% Hydrate 824-79-3
2-Acetylbutyrolactone, 99+% 517-23-7
Formamidine Disulfide Dihydrochloride, 94% 14807-75-1
4,4'-Dichloro-alpha-methylbenzhydrol, 99% 80-06-8
3-O-Methylglucose, 99% 13224-94-7
Mithramycin, 90% (HPLC) 18378-89-7
Phosphorus pentasulfide, 98+% 1314-80-3
5-Hydroxymethyl-5-methyl-1,3-dioxane, 97% 1121-97-7
2,3,5-Triiodobenzoic acid, 98% 88-82-4
N-Methylbutylamine 110-68-9



HBCChem,Inc

Chemical Information Net Copyright Reserved