Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

9016-87-9

File Name: 9016-87-9_v4.asp

                                                 MATERIAL SAFETY DATA SHEET



Bayer MaterialScience LLC TRANSPORTATION EMERGENCY
Product Safety & Regulatory Affairs CALL CHEMTREC: (800) 424-9300
100 Bayer Road INTERNATIONAL: (703) 527-3887
Pittsburgh, PA 15205-9741
USA NON-TRANSPORTATION
Bayer Emergency Phone: (412) 923-1800
Bayer Information Phone: (800) 662-2927

1. Product and Company Identification

MONDUR MR LIGHT
Product Name:
3818636
Material Number:
Aromatic Isocyanate
Chemical Family:
Polymeric Diphenylmethane Diisocyanate (pMDI)
Chemical Name:
9016-87-9
CAS-No.:


2. Hazards Identification



Emergency Overview

WARNING! Color: Brown Form: Liquid Odor: musty.
Toxic gases/fumes may be given off during burning or thermal decomposition. Closed
container may forcibly rupture under extreme heat or when contents have been
contaminated with water. Use cold water spray to cool fire-exposed containers to
minimize the risk of rupture. Causes respiratory tract irritation. May cause allergic
respiratory reaction. Harmful if inhaled. Respiratory sensitizer. Lung damage and
respiratory sensitization may be permanent. Causes skin irritation. May cause allergic
skin reaction. Skin sensitizer. Animal tests indicate that skin contact alone may lead to
allergic respiratory reaction. Causes eye irritation. May cause lung damage.

Potential Health Effects

Skin Contact, Inhalation, Eye Contact
Primary Routes of Entry:

Asthma, Respiratory disorders, Skin Allergies, Eczema
Medical Conditions Aggravated by
Exposure:


HUMAN EFFECTS AND SYMPTOMS OF OVEREXPOSURE

Inhalation
Acute Inhalation
For Product: MONDUR MR LIGHT
Diisocyanate vapors or mist at concentrations above the TLV or PEL can irritate (burning sensation) the
mucous membranes in the respiratory tract (nose, throat, lungs) causing runny nose, sore throat, coughing,
chest discomfort, shortness of breath and reduced lung function (breathing obstruction). Persons with a

Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 1 of 11 Report Version: 1.1
preexisting, nonspecific bronchial hyperreactivity can respond to concentrations below the TLV or PEL
with similar symptoms as well as asthma attack or asthma-like symptoms. Exposure well above the TLV
or PEL may lead to bronchitis, bronchial spasm and pulmonary edema (fluid in lungs). Chemical or
hypersensitivity pneumonitis, with flu-like symptoms (e.g., fever, chills), has also been reported. These
symptoms can be delayed up to several hours after exposure. These effects are usually reversible.

Chronic Inhalation
For Product: MONDUR MR LIGHT
As a result of previous repeated overexposures or a single large dose, certain individuals may develop
sensitization to diisocyanates (asthma or asthma-like symptoms) that may cause them to react to a later
exposure to diisocyanates at levels well below the TLV or PEL. These symptoms, which can include chest
tightness, wheezing, cough, shortness of breath or asthmatic attack, could be immediate or delayed up to
several hours after exposure. Extreme asthmatic reactions can be life threatening. Similar to many non-
specific asthmatic responses, there are reports that once sensitized an individual can experience these
symptoms upon exposure to dust, cold air or other irritants. This increased lung sensitivity can persist for
weeks and in severe cases for several years. Sensitization can be permanent. Chronic overexposure to
diisocyanates has also been reported to cause lung damage (including fibrosis, decrease in lung function)
that may be permanent.

Skin
Acute Skin
For Product: MONDUR MR LIGHT
Causes irritation with symptoms of reddening, itching, and swelling. Persons previously sensitized can
experience allergic skin reaction with symptoms of reddening, itching, swelling, and rash. Cured material is
difficult to remove. Contact with MDI can cause discoloration.

Chronic Skin
For Product: MONDUR MR LIGHT
Prolonged contact can cause reddening, swelling, rash, and, in some cases, skin sensitization. Animal tests
on MDI indicate skin contact alone may lead to an allergic respiratory reaction.

Eye
Acute Eye
For Product: MONDUR MR LIGHT
Causes irritation with symptoms of reddening, tearing, stinging, and swelling. May cause temporary
corneal injury. Vapor or aerosol may cause irritation with symptoms of burning and tearing.

Chronic Eye
For Product: MONDUR MR LIGHT
Prolonged vapor contact may cause conjuntivitis.

Ingestion
Acute Ingestion
For Product: MONDUR MR LIGHT
May cause irritation; Symptoms may include abdominal pain, nausea, vomiting, and diarrhea.

Carcinogenicity:
No Carcinogenic substances as defined by IARC, NTP and/or OSHA



3. Composition/Information on Ingredients

Hazardous Components
Weight % Components CAS-No.
40 - 55% Polymeric Diphenylmethane 9016-87-9


Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 2 of 11 Report Version: 1.1
Diisocyanate (pMDI)
35 - 45% 4,4'-Diphenylmethane Diisocyanate 101-68-8
(MDI)
1 - 5% Diphenylmethane Diisocyanate (MDI) 26447-40-5
Mixed Isomers


4. First Aid Measures

Eye Contact
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Use lukewarm water
if possible. Use fingers to ensure that eyelids are separated and that the eye is being irrigated. Get medical
attention.

Skin Contact
Immediately remove contaminated clothing and shoes. Wash off with soap and water. Use lukewarm water
if possible. Wash contaminated clothing before reuse. For severe exposures, immediately get under safety
shower and begin rinsing. Get medical attention if irritation develops.

Inhalation
Move to an area free from further exposure. Get medical attention immediately. Administer oxygen or
artificial respiration as needed. Asthmatic symptoms may develop and may be immediate or delayed up to
several hours. Extreme asthmatic reactions can be life threatening.

Ingestion
Do not induce vomiting. Wash mouth out with water. Do not give anything by mouth to an unconscious
person. Get medical attention.

Notes to physician
Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic/steroid preparation as
needed. Workplace vapors could produce reversible corneal epithelial edema impairing vision. Skin: This
compound is a skin sensitizer. Treat symptomatically as for contact dermatitis or thermal burn. Ingestion:
Treat symptomatically. There is no specific antidote. Inducing vomiting is contraindicated because of the
irritating nature of the compound. Inhalation: Treatment is essentially symptomatic. An individual having
a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to
any diisocyanate.


5. Fire-Fighting Measures

dry chemical, carbon dioxide (CO2), foam, water spray for large
Suitable Extinguishing Media:
fires.

Special Fire Fighting Procedures
Firefighters should wear NFPA compliant structural firefighting protective equipment, including self-
contained breathing apparatus and NFPA compliant helmet, hood, boots and gloves. Avoid contact with
product. Decontaminate equipment and protective clothing prior to reuse. During a fire, isocyanate vapors
and other irritating, highly toxic gases may be generated by thermal decomposition or combustion.
Exposure to heated diisocyanate can be extremely dangerous.

Unusual Fire/Explosion Hazards
Closed container may forcibly rupture under extreme heat or when contents are contaminated with water
(CO2 formed). Use cold-water spray to cool fire-exposed containers to minimize the risk of rupture. Large
fires can be extinguished with large volumes of water applied from a safe distance, since reaction between
water and hot diisocyanate can be vigorous.


Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 3 of 11 Report Version: 1.1
6. Accidental release measures

Spill and Leak Procedures
Evacuate non-emergency personnel. Isolate the area and prevent access. Remove ignition sources. Notify
management. Put on protective equipment. Control source of the leak. Ventilate. Contain the spill to
prevent spread into drains, sewers, water supplies, or soil. Call Bayer at 412-923-1800 for assistance and
advice. Major Spill or Leak (Standing liquid): Released material may be pumped into closed, but not
sealed, metal container for disposal. Process can generate heat. Minor Spill or Leak (Wet surface): Cover
spill area with suitable absorbent material (Kitty Litter, Oil-Dri庐, etc). Saturate absorbent material with
neutralization solution and mix. Wait 15 minutes. Collect material in open-head metal containers. Repeat
applications of decontamination solution, with scrubbing, followed by absorbent until the surface is
decontaminated. Check for residual surface contamination. Swype庐 test kits have been used for this
purpose. Apply lid loosely and allow containers to vent for 72 hours to let carbon dioxide (CO2) escape.

Additional Spill Procedures/Neutralization
Neutralization solutions:
(1) Colorimetric Laboratories Inc. (CLI) decontamination solution.
(2) A mixture of 75% water, 20% non-ionic surfactant (e.g. Poly-Tergent SL-62, Tergitol TMN-10) and 5%
n-propanol.
(3) A mixture of 80% water, 20% non-ionic surfactant (e.g. Poly-Tergent SL-62, Tergitol TMN-10).
(4) A mixture of 90% water, 3-8% ammonium hydroxide or concentrated ammonia, and 2% liquid
detergent.

Bayer requires that CHEMTREC be immediately notified (800-424-9300) when this product is
unintentionally released from its container during its course of distribution, regardless of the amount
released. Distribution includes transportation, storage incidental to transportation, loading and unloading.
Such notification must be immediate and made by the person having knowledge of the release.



7. Handling and Storage

Storage Temperature:
17.78 掳C (64 掳F)
minimum:
30 掳C (86 掳F)
maximum:

Handling/Storage Precautions
Do not breathe vapors, mists, or dusts. Use adequate ventilation to keep airborne isocyanate levels below
the exposure limits. Wear respiratory protection if material is heated, sprayed, used in a confined space, or
if the exposure limit is exceeded. Warning properties (irritation of the eyes, nose and throat or odor) are
not adequate to prevent overexposure from inhalation. This material can produce asthmatic sensitization
upon either single inhalation exposure to a relatively high concentration or upon repeated inhalation
exposures to lower concentrations. Individuals with lung or breathing problems or prior allergic reactions
to isocyanates must not be exposed to vapor or spray mist. Avoid contact with skin and eyes. Wear
appropriate eye and skin protection. Wash thoroughly after handling. Do not breathe smoke and gases
created by overheating or burning this material. Decomposition products can be highly toxic and irritating.
Store in tightly closed containers to prevent moisture contamination. Do not reseal if contamination is
suspected.

Further Info on Storage Conditions
Employee education and training in the safe use and handling of this product are required under the OSHA
Hazard Communication Standard 29 CFR 1910.1200.



Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 4 of 11 Report Version: 1.1
8. Exposure Controls / Personal Protection


4,4'-Diphenylmethane Diisocyanate (MDI) (101-68-8)
US. ACGIH Threshold Limit Values
Time Weighted Average (TWA): 0.005 ppm
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Ceiling Limit Value: 0.02 ppm, 0.2 mg/m3

Industrial Hygiene/Ventilation Measures
Local exhaust should be used to maintain levels below the TLV whenever MDI is heated, sprayed, or
aerosolized. Standard reference sources regarding industrial ventilation (e.g., ACGIH Industrial Ventilation
Manual) should be consulted for guidance about adequate ventilation. To ensure that published exposure
limits have not been exceeded, monitoring for airborne diisocyanate should become part of the overall
employee exposure characterization program. NIOSH, OSHA, Bayer, and others have developed sampling
and analytical methods. Bayer methods can be made available, upon request.

Respiratory Protection
Airborne MDI concentrations greater than the ACGIH TLV-TWA (TLV) or OSHA PEL-C (PEL) can
occur in inadequately ventilated environments when MDI is sprayed, aerosolized, or heated. In
such cases, respiratory protection must be worn. The type of respiratory protection selected must comply
with the requirements set forth in OSHA's Respiratory Protection Standard (29 CFR 1910.134). The type
of respiratory protection available includes (1) an atmosphere-supplying respirator such as a self-contained
breathing apparatus (SCBA) or a supplied air respirator (SAR) in the positive pressure or continuous flow
mode, or (2) an air-purifying respirator (APR). If an APR is selected then (a) the cartridge must be
equipped with an end-of-service life indicator (ESLI) certified by NIOSH, or(b) a change out schedule,
based on objective information or data that will ensure that the cartridges are changed out before the end of
their service life, must be developed andimplemented. The basis for the change out schedule must be
described in the written respirator program. Further, if an APR is selected, the airborne diisocyanate
concentration must be no greater than 10 times the TLV or PEL. The recommended APR cartridge is an
organic vapor/particulate filter combination cartridge (OV/P100).


Hand Protection
Gloves should be worn., Nitrile rubber showed excellent resistance., Butyl rubber, neoprene and PVC are
also effective.

Eye Protection
When directly handling liquid product, eye protection is required. Examples of eye protection include a
chemical safety goggle, or chemical safety goggle in combination with a full face shield when there is a
greater risk of splash.

Skin and body protection
Avoid all skin contact. Depending on the conditions of use, cover as much of the exposed skin area as
possible with appropriate clothing to prevent skin contact.

Medical Surveillance
All applicants who are assigned to an isocyanate work area should undergo a pre-placement medical
evaluation. A history of eczema or respiratory allergies such as hay fever, are possible reasons for medical
exclusion from isocyanate areas. Applicants who have a history of adult asthma should be restricted from
work with isocyanates. Applicants with a history of prior isocyanate sensitization should be excluded from
further work with isocyanates. A comprehensive annual medical surveillance program should be instituted
for all employees who are potentially exposed to diisocyanates. Once a worker has been diagnosed as
sensitized to any isocyanate, no further exposure can be permitted. Refer to the Bayer pamphlet (Medical
Surveillance Program for Isocyanate Workers) for additional guidance.


Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 5 of 11 Report Version: 1.1
Additional Protective Measures
Emergency showers and eye wash stations should be available. Educate and train employees in the safe use
and handling of this product. Follow all label instructions.


9. Physical and chemical properties

Liquid
Form:
Brown
Color:
musty
Odor:
Not Applicable
pH:
< 0 掳C (< 32 掳F) For the active ingredient.
Freezing Point:
Approximately 208 掳C (406.4 掳F)
Boiling Point/Range:
198.89 掳C (390 掳F) (Pensky-Martens Closed Cup (ASTM D-93))
Flash Point:
< 0.0001 mmHg @ 25 掳C (77 掳F)
Vapor Pressure:
1.24 @ 25 掳C (77 掳F)
Specific Gravity:
Insoluble - Reacts slowly with water to liberate CO2 gas
Solubility in Water:
10.3 lb/gal
Bulk Density:


10. Stability and Reactivity

Hazardous Reactions
Contact with moisture, other materials that react with isocyanates, or temperatures above 350 F (177 C),
may cause polymerization.

Materials to avoid
Water, Amines, Strong bases, Alcohols, copper alloys

Hazardous decomposition products
By Fire and High Heat: hydrogen cyanide; Carbon dioxide (CO2), carbon monoxide (CO), oxides of
nitrogen (NOx), dense black smoke, Isocyanate, Isocyanic Acid, Other undetermined compounds


11. Toxicological Information

Toxicity Data for MONDUR MR LIGHT
Toxicity Note
Toxicity data based on polymeric MDI.

Acute Oral Toxicity
LD50: > 2,000 mg/kg (rat, Male/Female)

Acute Inhalation Toxicity
LC50: 490 mg/m3, vapor, 4 h (rat)

Skin Irritation
rabbit, Slightly irritating

Repeated Dose Toxicity
90 Days, inhalation: NOAEL: 1 mg/m3, (rat, Male/Female, 6 hrs/day 5 days/week)
Irritation to lungs and nasal cavity.
2 years, inhalation: NOAEL: 0.2 mg/m3, (rat, Male/Female, 6 hrs/day 5 days/week)
Irritation to lungs and nasal cavity.


Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 6 of 11 Report Version: 1.1
Mutagenicity
Genetic Toxicity in Vitro:
Bacterial - gene mutation assay: negative (Salmonella typhimurium, Metabolic Activation: with/without)

Carcinogenicity
rat, Male/Female, inhalation, 2 Years, 6 hrs/day 5 days/week
Exposure to a level of 6 mg/m3 polymeric MDI was related to the occurrence of lung tumors. This level is
significantly over the TLV for MDI.

Developmental Toxicity/Teratogenicity
rat, female, inhalation, gestation days 6-15, 6 hrs/day, NOAEL (teratogenicity): 12 mg/m3, NOAEL
(maternal): 4 mg/m3
No Teratogenic effects observed at doses tested. Fetotoxicity seen only with maternal toxicity.

Toxicity Data for 4,4'-Diphenylmethane Diisocyanate (MDI)
Acute Inhalation Toxicity
LC50: 369 mg/m3, 4 hrs (rat, Male/Female)
LC50: > 2240 mg/m3, aerosol, 1 h (rat)

Acute dermal toxicity
LD50: > 10,000 mg/kg (rabbit)

Skin Irritation
rabbit, Draize Test, Slightly irritating

Eye Irritation
rabbit, Draize Test, Slightly irritating

Sensitization
dermal: sensitizer (guinea pig, Maximisation Test (GPMT))
inhalation: sensitizer (Guinea pig)

Repeated Dose Toxicity
90 Days, inhalation: NOAEL: 0.3 mg/m3, (rat, Male/Female, 18 hrs/day, 5 days/week)
Irritation to lungs and nasal cavity.

Mutagenicity
Genetic Toxicity in Vitro:
Ames: (Salmonella typhimurium, Metabolic Activation: with/without)
Positive and negative results were reported. The use of certain solvents which rapidly hydrolyze
diisocyanates is suspected of producing the positive mutagenicity results.
Genetic Toxicity in Vivo:
Micronucleus Assay: negative (mouse)

Carcinogenicity
rat, Female, inhalation, 2 Years, 17 hrs/day, 5 days/week
negative



12. Ecological Information

Ecological Data for MONDUR MR LIGHT
Biodegradation
0 %, Exposure time: 28 Days



Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 7 of 11 Report Version: 1.1
Bioaccumulation
Rainbow trout, Exposure time: 112 d, < 1 BCF
Does not bioaccumulate.

Acute and Prolonged Toxicity to Fish
LC0: > 1,000 mg/l (Zebra fish (Brachydanio rerio), 96 hrs)
LC0: > 3,000 mg/l (Killifish (Oryzias latipes), 96 h)

Acute Toxicity to Aquatic Invertebrates
EC50: > 1,000 mg/l (Water flea (Daphnia magna), 24 hrs)

Toxicity to Aquatic Plants
NOEC: 1,640 mg/l, End Point: growth (Green algae (Scenedesmus subspicatus), 72 hrs)

Toxicity to Microorganisms
EC50: > 100 mg/l, (Activated sludge microorganisms, 3 hrs)

Additional Ecotoxicological Remarks
Ecotoxicity data based on polymeric MDI

Ecological Data for 4,4'-Diphenylmethane Diisocyanate (MDI)
Acute and Prolonged Toxicity to Fish
LC50: > 500 mg/l (Zebra fish (Brachydanio rerio), 24 hrs)

Acute Toxicity to Aquatic Invertebrates
EC50: > 500 mg/l (Water flea (Daphnia magna), 24 hrs)



13. Disposal considerations

Waste Disposal Method
Waste disposal should be in accordance with existing federal, state and local environmental control laws.
Incineration is the preferred method.

Empty Container Precautions
Empty containers retain product residue; observe all precautions for product. Do not heat or cut empty
container with electric or gas torch because highly toxic vapors and gases are formed. Do not reuse without
thorough commercial cleaning and reconditioning. If container is to be disposed, ensure all product
residues are removed prior to disposal.



14. Transportation information

Land transport (DOT)
Other regulated substances, liquid, n.o.s. (contains 4,4'-
Proper Shipping Name:
Diphenylmethane Diisocyanate (MDI))
9
Hazard Class or Division:
NA3082
UN/NA Number:
III
Packaging Group:
Class 9
Hazard Label(s):

RSPA/DOT Regulated Components:
4,4'-Diphenylmethane Diisocyanate (MDI)


Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 8 of 11 Report Version: 1.1
11,111 lb
Reportable Quantity:

Sea transport (IMDG)
Non-Regulated

Air transport (ICAO/IATA)
Non-Regulated

Additional Transportation Information
When in individual containers of less than the Product RQ, this material ships as non-regulated.



15. Regulatory Information

United States Federal Regulations

Hazardous
OSHA Hazcom Standard Rating:

Listed on the TSCA Inventory.
US. Toxic Substances Control Act:

US. EPA CERCLA Hazardous Substances (40 CFR 302):
Components
4,4'-Diphenylmethane Diisocyanate Reportable quantity: 5,000 lbs
(MDI)

SARA Section 311/312 Hazard Categories:
Acute Health Hazard, Chronic Health Hazard

US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 302 Extremely Hazardous Substance (40 CFR 355, Appendix A):
Components
None


US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 313 Toxic Chemicals (40 CFR 372.65) - Supplier Notification Required:
Components
Polymeric Diphenylmethane Diisocyanate (pMDI)
4,4'-Diphenylmethane Diisocyanate (MDI)

US. EPA Resource Conservation and Recovery Act (RCRA) Composite List of Hazardous Wastes
and Appendix VIII Hazardous Constituents (40 CFR 261):
If discarded in its purchased form, this product would not be a hazardous waste either by listing or by
characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time
of disposal, whether a material containing the product or derived from the product should be classified as a
hazardous waste. (40 CFR 261.20-24)

State Right-To-Know Information
The following chemicals are specifically listed by individual states; other product specific health and safety
data in other sections of the MSDS may also be applicable for state requirements. For details on your
regulatory requirements you should contact the appropriate agency in your state.

This product contains a trace (ppm) amount of phenyl isocyanate (CAS# 103-71-9) and
monochlorobenzene (CAS# 108-90-7) as impurities.



Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 9 of 11 Report Version: 1.1
Massachusetts, New Jersey or Pennsylvania Right to Know Substance Lists:
Weight % Components CAS-No.
40 - 55% Polymeric Diphenylmethane 9016-87-9
Diisocyanate (pMDI)
35 - 45% 4,4'-Diphenylmethane Diisocyanate 101-68-8
(MDI)
1 - 5% Diphenylmethane Diisocyanate (MDI) 26447-40-5
Mixed Isomers

New Jersey Environmental Hazardous Substances List and/or New Jersey RTK Special Hazardous
Substances Lists:
Weight % Components CAS-No.
40 - 55% Polymeric Diphenylmethane 9016-87-9
Diisocyanate (pMDI)
35 - 45% 4,4'-Diphenylmethane Diisocyanate 101-68-8
(MDI)

California Prop. 65:
To the best of our knowledge, this product does not contain any of the listed chemicals, which the state of
California has found to cause cancer, birth defects or other reproductive harm.



16. Other Information

NFPA 704M Rating
2
Health
1
Flammability
1
Reactivity
Other
0=Insignificant 1=Slight 2=Moderate 3=High 4=Extreme

HMIS Rating
2*
Health
1
Flammability
1
Physical Hazard
0=Minimal 1=Slight 2=Moderate 3=Serious 4=Severe
* = Chronic Health Hazard


Bayer MaterialScience LLC's method of hazard communication is comprised of Product Labels and
Material Safety Data Sheets. HMIS and NFPA ratings are provided by Bayer MaterialScience LLC as a
customer service.


Contact Person: Product Safety Department
Telephone: (412) 777-2835
MSDS Number: R300271
Version Date: 08/20/2004
Report Version: 1.1


This information is furnished without warranty, express or implied. This information is believed to be
accurate to the best knowledge of Bayer MaterialScience LLC. The information in this MSDS relates only
to the specific material designated herein. Bayer MaterialScience LLC assumes no legal responsibility for
use of or reliance upon the information in this MSDS.

Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 10 of 11 Report Version: 1.1
Article Number: 3818636
Material Name: MONDUR MR LIGHT
Page: 11 of 11 Report Version: 1.1

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
107-21-1.asp 107-21-1 1330-43-4
119-90-4.asp 119-90-4
safety_tmu_edu_tw_09801C.asp N/A
safety_tmu_edu_tw_13401C.asp N/A
safety_vanderbilt_edu_biozyme_10_00.asp N/A
1317-65-3.asp 1317-65-3 14808-60-7
65997-17-3.asp 65997-17-3
saltx_com_au_PhewGoMSDS.asp N/A
saltx_com_au_SaltBusterMSDS.asp N/A
7757-82-6.asp 7757-82-6
9016-87-9.asp 9016-87-9
sandhyagroup_com_MSDSAluminiumPhosphide.asp N/A
3068-39-1.asp 3068-39-1 29556-33-0
67-63-0.asp 67-63-0 9016-45-9 68424-95-3 68424-85-1
1308-38-9.asp 1308-38-9
8032-32-4.asp 8032-32-4 67-64-1
10213-79-3.asp 10213-79-3
7789-02-8.asp 7789-02-8
21-01-2.asp 21-01-2 5131-66-8 160901-09-7 68515-73-1
52645-53-1.asp 52645-53-1 64742-95-6
52645-53-1.asp 52645-53-1 64742-95-6
scatissue_com_192137_MSDS.asp N/A
1310-58-3.asp 1310-58-3 64-17-5
scenesafe_co_uk_K161MSDS_2.asp N/A
67-64-1.asp 67-64-1
schc_org_S05MSDS.asp N/A
scielo_br_v101n6a08.asp N/A
50-78-2.asp 50-78-2
7632-00-0.asp 7632-00-0
7440-31-5.asp 7440-31-5
5949-29-1.asp 5949-29-1
7722-76-1.asp 7722-76-1 7778-80-5 57-13-6 7704-34-9 1309-37-1
57-13-6.asp 57-13-6 4861-19-2 7447-40-7 7722-76-1 15708-41-5
6484-52-2.asp 6484-52-2 7758-23-8 7758-87-4 7783-28-0 7789-75-5 10034-99-8
6484-52-2.asp 6484-52-2 7778-80-5 7722-76-1 7758-23-8 7789-75-5
6484-52-2.asp 6484-52-2 7778-80-5 7722-76-1 7758-23-8 7789-75-5
20-10-2.asp 20-10-2 7757-79-1 6484-52-2 10043-35-3
14-14-1.asp 14-14-1 57-13-6 7778-80-5 1345-25-1 17375-41-6 7704-34-9 7733-02-0 7758-98-7 1317-38-0 7785-87-7 1344-43-0 7487-88-9 1309-48-4 7722-76-1
57-13-6.asp 57-13-6 7722-76-1 7447-40-7 7704-34-9
7732-18-5.asp 7732-18-5 7791-18-6
scotwoodindustries_com_EXCEL_MSDS.asp N/A
scotwoodindustries_com_FreezGardProductdata.asp N/A
scratchzero_net_WindowSKIN_Pro_MSDS.asp N/A
64-02-8.asp 64-02-8 9019-45-9 5064-31-3
scrubinc_com_Murphys_Oil_Soap_MSDS.asp N/A
75-28-5.asp 75-28-5 74-98-6
9003-39-8.asp 9003-39-8 25249-54-1 7647-14-5
67-56-1.asp 67-56-1 68-12-2 7664-93-9
26628-22-8.asp 26628-22-8 7664-93-9 7722-84-1 615-28-1
sdix_com_9998106.0.asp N/A


HBCChem,Inc

Chemical Information Net chemcas.orgCopyright Reserved

Trading Lead

Leputech HPLC Laboratory