Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Health Hazard Data
Acute Health Effects: May be harmful if ingested, inhaled or absorbed through skin.
May cause irritation.
Chronic Health Effects: Unknown
Section 3 : First Aid Measures
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for at least 15
minutes separating eyelids. Seek medical attention immediately
Skin Contact: Wash with soap and water for 15 minutes. Remove contaminated clothing and shoes.
Seek medical attention immediately.
Inhalation: Remove from exposure. If breathing is difficult, administer oxygen. If breathing stops,
administer artificial respiration. Seek medical attention immediately. Provide chemical label
and MSDS if possible.
Ingestion: Remove dentures and clear mouth. If person is conscious, induce vomiting. Call
physician or poison control immediately. Provide chemical label and MSDS information if
possible.
Section 4 : Fire and Explosion Data
Flammability: Not Available
Flash Point: Not Applicable
Combustion Products: Unknown
Extinguishing Media: Use methods appropriate to other materials involved.
Special Firefighting Procedures: Use self-contained breathing apparatus and protective clothing to
prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: May emit toxic gases upon thermal decomposition.
Section 5 : Spill or Leak Procedures
Cleanup Procedures: EVACUATE AREA Wearing appropriate protective gear as outlined under
"Protective equipment" wipe up spill and place in sealed container and hold in a safe, cold, dark,
dry, place for disposal. Avoid raising dust. Ventilate the area and wash spill site after material has
been removed.
Waste Disposal Method: Observe all Federal, State and Local regulations concerning the disposal of
this product.
Section 6 : Storage and Handling Precautions
Protective Equipment: For spill clean up, wear suitable protective clothing, chemical resistant rubber
gloves, rubber boots, chemical safety goggles and dust mask. Self contained breathing apparatus
or NIOSH/MSHA approved respirator not necessary unless ventilation is compromised.
Storage and Handling: This product should be stored at ?0癈. It should be kept in a tightly
closed container. This product should be handled only by qualified experienced professionals.
Wash thoroughly after handling this material
Section 7 : Physical Data
Appearance: White solid Odor: None
Molecular Weight: 354.5 Taste: Not Available
Boiling Point: Not Available Melting Point: 114-115癈
Solubility: Acetone, Ethyl acetate, Methanol, Ethanol Vapor Density: Not Available
Specific Gravity: Not Available Vapor Pressure: Not Available
Volatility: Not Available
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: Humidity, extended light exposure, temperatures above 50? acidic and alkaline
pH
Incompatibles: Non-noble metals
Section 9 : Toxicity Data
RTECS#: Not Available
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a guide. The burden of
safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA