MATERIAL SAFETY DATA SHEET
Haematoxylin, Harris, single strength
Page 1 of 2
Date of Issue: 18 Sept. 06
STATEMENT OF HAZARDOUS NATURE
Not classified as hazardous according to criteria of Worksafe Australia
COMPANY DETAILS
ProSciTech
Company:
Address: PO Box 111, Thuringowa Central Qld. 4817 Australia
Street Address: 1/11 Carlton Street, Kirwan, Qld. 4817 Australia
Telephone Number: (07) 4773 9444
Fax Number: (07) 4773 2244
IDENTIFICATION SECTION
Haematoxylin, Harris, single strength
Product Name
Haematoxylin Harris'
Other Names
AHH-1L, AHH-500
Product Code
None allocated
U.N. Number
None allocated
Dangerous Goods Class
None allocated
and Subsidiary Risk
None allocated
Hazchem Code
None allocated
Poison Schedule
Used as a Histopathology stain for invitro diagnostic use in Hospital
Use
and Pathology laboratories only.
Physical Description and Properties
Red - Purple liquid
Appearance
105oC / -5oC
Boiling Point/Melting Point
23 hPa @ 20oC
Vapour Pressure
1mL = 1g
Specific Gravity
Not Applicable
Flash Point
Not determined
Flammability Limits
Soluble in all proportions
Solubility in water
Other Properties
Ingredients
Chemical Name CAS Number Proportion
Haematoxylin C.I. 75290 (Below 517-28-2 Less than 1%
Cutoff)
Aluminium Potassium Sulphate 7784-24-9 1 to 10%
Sodium Iodate 7681-55-2 Less than 1%
Ethanol 64-17-5 Less than 4%
Purified Water 7732-18-5 Greater than 60%
Page 2 of 3
Haematoxylin, Harris, single strength
HEALTH HAZARD INFORMATION
Health Effects:
Acute
May cause irritation to mouth, throat and stomach with effects including
Swallowed:
mucous build up, irritation to the tongue and lips and pains in the stomach.
May cause irritation to the eyes, with effects including: tearing, pain, stinging
Eye:
and blurred vision.
May cause irritation to the skin, with effects including; Redness and itchiness.
Skin:
May cause irritation to the nose, throat and respiratory system with effects
Inhaled:
including: Dizziness, headache and possible confusion.
Prolonged or repeated skin contact may lead to dermatitis.
Chronic:
First Aid:
If swallowed, DO NOT induce vomiting. If victim is conscious give water. If
Swallowed:
sickness persists transport to hospital or doctor.
If material is splashed into eyes, immediately, flush with plenty of water for 15
Eye:
minutes, ensuring eye lids are held open.If irritation persists transport to
hospital or doctor
If material is splashed onto the skin, remove any contaminated clothing and
Skin:
wash skin thoroughly with water and soap if available. If irritation persists
transport to hospital or doctor.
Open all doors, windows and/or vents. Move victim to fresh air. Apply
Inhaled:
resuscitation if victim is not breathing - If trained personnel available
administer oxygen if breathing is difficult.
Eye wash fountain, safety shower and normal wash room facilities
First Aid Facilities:
Treat symptomatically.
Advice to Doctor
PRECAUTIONS FOR USE
METHYLATED SPIRITS
Exposure Standards:
(Worksafe Australia)
[TWA]1,000 ppm 1,880 mg/m?br>
Notices: H
(ACGIH)
[TWA]1,000 ppm 1,880 mg/m?br>
Carcinogen Category: A4
Maintain adequate ventilation at all times. In most circumstances natural
Engineering Controls:
ventilation systems are adequate unless the material is heated, reacted or
otherwise changed in some type of chemical reaction, then the use of a local
exhaust ventilation system is recommended.
CLOTHING: PVC or natural rubber apron or splash suit. GLOVES: PVC or
Personal Protection:
natural rubber. EYES: Chemical goggles or faceshield to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of vapours / gases. Select
and use respirators in accordance with AS/NZS 1715/1716. The use of a P1
dust mask (disposable) or with replaceable filters is recommended. Filter
capacity and respirator type depends on exposure levels and type of
contaminant. If entering spaces where the airborne concentration of a
contaminant is unknown then the use of a Self-contained breathing apparatus
(SCBA) with positive pressure air supply complying with AS/NZS 1715 / 1716,
or any other acceptable International Standard is recommended.
This material is not a flammable or combustible liquid.
Flammability:
Page 3 of 3
Haematoxylin, Harris, single strength
SAFE HANDLING INFORMATION
Store in a cool place and out of direct sunlight. Store away from sources of heat
Storage and Transport:
or ignition. Store away from oxidizing agents. Keep containers closed, when
not using the product. Store in original packages as approved by manufacturer.
Material may be slippery when spilt. Walk cautiously. Ventilate area. Wear
Spills and Disposal:
protective equipment to prevent skin and eye contact, as outlined under
personal protection in this MSDS. Bund area using sand or soil - to prevent run
off into drains and waterways. Use absorbent (soil, sand, vermiculite or other
inert material). Collect and seal in properly labeled containers for disposal.
Remainder of material can be washed to drain with plenty of water.
For disposal information contact the State Land Waste Management Authority
or the Environmental Protection Agency.
If safe to do so, move undamaged containers from fire area.
Fire/Explosion Hazard:
Hazardous Decomposition Products: Decomposes on heating emitting soot,
smoke and decomposition products.
Fire Fighting Procedures: Fire fighters to wear Self-contained breathing
apparatus (SCBA) in confined spaces, in oxygen deficient atmospheres or if
exposed to products of decomposition. Full protective clothing is also
recommended.
Extinguishing Media: Use extinguishing media suitable for surrounding fire
situation.
OTHER INFORMATION
Strong alkalis, acids, oxidizing agents.
Incompatibilities
(Materials to avoid)
Animal Toxicity Data:
The information published in this Material Safety Data Sheet has been compiled from data in various technical
publications. It is the user's responsibility to determine the suitability of this information for adoption of necessary
safety precautions. We reserve the right to revise Material Safety Data Sheets as new information becomes available.
Copies may be made for non-profit use.
|