MSDS SHEP WELD
Material Safety Data Sheet
1. ProDuct anD comPany iDEntification
Company : Euclid Chemical Company
19218 Redwood Road
Cleveland, OH 44110
Telephone : 1-800-321-7628
Emergency Phone: : U.S. only: 1-800-255-3924
International Users Call Collect: 1-813-248-0585
Trade name : Akkro-7T
Product code : TL6201555
Product Use: Admixture
2. HazarDS iDEntification
Off-White to White. Liquid. No serious effects anticipated under normal conditions of use. Leave area to breathe fresh air. Avoid
further overexposure. If symptoms persist, get medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation : No serious effects anticipated under normal conditions of use.
Eyes : Direct contact may cause mild irritation.
Ingestion : May cause gastrointestinal irritation, nausea, and vomiting.
Skin : May cause mild irritation.
Aggravated Medical Conditions : Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects : Fillers are encapsulated and not expected to be released from product under normal conditions of use.
3. ProDuct comPoSition
chemical name caS-no. Weight %
Water 7732-18-5 > 60.0
Acrylic Latex NJ TSRN# 51721300-5389P 15.0 - 40.0
Ammonium Hydroxide 1336-21-6 - <1.0
Formaldehyde 50-00-0 - <0.1
4. firSt aiD mEaSurES
Get immediate medical attention for any significant overexposure.
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical attention immediately.
Skin contact : Clean area of contact thoroughly with hand cleaner followed by soap and water. If irritation, rash or other disorders
develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control Center or Physician immediately.
5. firE figHting mEaSurES
Flash point : Not available.
Method : Not available.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Extinguishing media : This product is not expected to burn under normal conditions of use. Use that which is appropriate to the
Hazardous combustion : Carbon monoxide and carbon dioxide can form. Smoke, fumes.
Protective equipment for firefighters: Use accepted fire fighting techniques. Wear full firefighting protective clothing including self
contained breathing apparatus.
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.
6. acciDEntaL rELEaSE mEaSurES
Transfer to appropriate container for disposal. Stop flow. Contain spill. Keep out of water courses. Absorb spill in sand, earth or
other suitable material. Transfer to appropriate container for disposal. Use appropriate protective equipment. Avoid contact with
7. HanDLing anD StoragE
Handle in compliance with common hygienic practices. Clean hands thoroughly after handling. Keep from freezing. Do not use in
confined or poorly ventilated areas. Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container
closed when not in use. Precautions also apply to emptied containers. Store in sealed containers in a dry, ventilated warehouse
location above freezing.
8. ExPoSurE controLS/PErSonaL ProtEction
Respiratory protection : Not required under normal conditions of use. Wear appropriate, NIOSH/MSHA approved respirator with
combination particulate filter and vapor/gas removing cartridge when the ventilation is not adequate or if it is necessary to
abrade or grind surfaces coated with this product.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to reduce exposure.
Eye protection : Wear appropriate eye protection. Wear chemical safety goggles and/or face shield to prevent eye contact. Do not
wear contact lenses. Do not touch eyes with contaminated body parts or materials. Have eye washing facilities readily available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Other equipment not normally required. Use professional judgment in the selection, care, and use.
Engineering measures : Not required under normal conditions of use.Use local exhaust when the general ventilation is inad-
chemical name caS number regulation Limit form
Ammonium hydroxide 1336-21-6 ACGIH TWA: 25 ppm
ACGIH STEL: 35 ppm
OSHA PEL: 35 mg/m3
9. PHySicaL anD cHEmicaL ProPErtiES
Form : Liquid
Color : Off-White to White
Odor : Slight Ammonia
pH : 9 - 10
Vapor pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Soluble
Specific Gravity : 1.1
% Volatile Weight : 70.5 %
Substances to avoid : Strong acids. Strong bases.
Stability : Stable
Hazardous polymerization : Will not occur.
11. toxicoLogicaL information
Ammonium hydroxide, CAS-No.: 1336-21-6
Acute oral toxicity (LD-50 oral) 350 mg/kg ( Rat )
Formaldehyde, CAS-No.: 50-00-0
Acute oral toxicity (LD-50 oral) 800 mg/kg ( Rat ) 260 mg/kg ( Guinea pig ) 100 mg/kg ( Rat ) 42 mg/kg ( Mouse )
Acute inhalation toxicity (LC-50) 0.82 mg/l for 30 min ( Rat ) 0.48 mg/l for 4 h ( Rat ) 0.414 mg/l for 4 h ( Mouse ) 0.4
mg/l for 2 h ( Mouse )
12. DiSPoSaL conSiDErationS
Not regulated under RCRA. Dispose of in compliance with state and local regulations. Do not incinerate.
13. rEguLatory information
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
U.S. Federal Regulations:
SARA 313 Components : None present or none present in regulated quantities.
SARA 311/312 Hazards : Acute Health Hazard
OSHA Hazardous Components :
Ammonium hydroxide 1336-21-6
OSHA Status: Considered hazardous based on the following criteria: Irritant
OSHA Flammability : Not Regulated
Regulatory VOC (less water and exempt solvent) : 10 g/l
VOC Method 310 : 0 %
U.S. State Regulations:
MASS RTK Components : Formaldehyde 50-00-0
Penn RTK Components : Water 7732-18-5
Acrylic Latex NJ TSRN# 51721300-5389P
NJ RTK Components : Water 7732-18-5
Acrylic Latex NJ TSRN# 51721300-5389P
WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other reproductive harm:
14. otHEr information
HMIS Rating :
Health 1 0 = Minimum
Flammability 0 1 = Slight
Reactivity 0 2 = Moderate
PPE 3 = Serious
4 = Severe
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
ACGIH - American Conference of Governmental Hygienists PEL - Permissible Exposure Limit
CERCLA - Comprehensive Environmental Response, Compensation, and Liability Act
RCRA - Resource Conservation and Recovery Act DOT - Department of Transportation
RTK - Right To Know DSL - Domestic Substance List
SARA - Superfund Amendments and Reauthorization Act EPA - Environmental Protection Agency
STEL - Short Term Exposure Limit HMIS - Hazardous Materials Information System
TLV - Threshold Limit Value IARC - International Agency for Research on Cancer
TSCA - Toxic Substances Control Act MSHA - Mine Safety Health Administration
TWA - Time Weighted Average NDSL - Non-Domestic Substance List
V - Volume VOC - Volatile Organic Compound
NIOSH - National Institute for Occupational Safety and Health NTP - National Toxicology Program
WHMIS - Workplace Hazardous Materials Information System
The information contained herein is based on the data available to us and is believed to be correct. However, we make no war-
ranty, expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. We assume no
responsibility for injury from the use of the product described herein.