MATERIAL SAFETY DATA SHEET
RETROPEL - HEAVY DUTY CONCRETE SEALER
Water-Based Fluorochemical Sealer
Section I - Product Identification
RetroPel - Heavy Duty Concrete Sealer
Advanced Floor Products - P.O. Box 50533 Provo, UT. 84605 (801) 812-3420
Section II - Components
Ingredient CAS# Wt.% OSHA PEL A CGIHTLV
2-Propanol 67-63-0 <5% 400 ppm 400ppm
2-Butoxyethanol 111-76-2 <10% 25 ppm 25ppm
Active Ingredients Trade Secret N/A N/A
Section III - Health Hazard Data Section IV - Emergency First Aid Procedures
Chronic Effects of Overexposure: N/D Inhalation: Move to fresh air; get medical attention if irritation persists.
Acute Effects of Overexposure: Eye Contact: Flush thoroughly with water for at least 15 minutes and
Inhalation: Excessive exposure may cause consult a physician if irritation persists.
respiratory irritation. Skin Contact: Wash skin thoroughly with mild soap and water.
Eye Contact: May cause eye irritation. Remove contaminated clothing.
Skin Contact: May cause skin irritation Ingestion: If conscious, drink three to four 8-ounce glasses of water or milk.
Ingestion: May cause nausea and vomiting. Consult a physician.
Section V - Fire and Explosion Data Section VI - Accidental Release Measures
Flash Point: Above 200?F Eliminate all ignition sources. Prevent further spill of material. Absorb onto
Auto Ignition: N/A Combustible Liquid Class III-B vermiculite or other absorbent.
Extinguishing Agents: Water, foam. carbon dioxide
Section VII - Handling and Storage
(CO2), dry chemical.
Auto ignition Temperature: N/A
Store out of the reach of children. Keep container closed and store in a cool
Hazardous Decomposition Products: Thermal
location. Avoid Freezing or extended storage in high temperature.
decomposition may produce oxides of carbon and nitrogen,
and toxic fluorinated decomposition products.
Explosion Data: N/A
Section VIII - Exposure Control and Personal Protection
Ventilation: Local room ventilation is normally adequate. In very enclosed spaces, wear a NIOSH approved respirator.
Protective gloves: Chemical resistant gloves should be worn.
Eye Protection: Wear safety glasses.
Section IX - Physical/Chemical Characteristics Section X - Stability and Reactivity
Appearance: Very slightly hazy, light amber liquid. Stability: Stable-Polymerization will not occur.
Specific Gravity: 1.01 Conditions to avoid: Heat, sparks, flames; avoid heating above 200 C/392 F
Vapor Pressure: N/A Incompatibilty/Materials to Avoid: Strong alkaline compounds,
Vapor Density: N/A acids, oxidizing agents.
Boiling Point: N/A
Water Solubility: Dispersible
Odor: Mild, ammonia
Section XII - Ecological Information
Section XI - Toxicological Information
Please call the non-emergency number under Section I if information is required. Please call the non-emergency number under Section I if information is required.
Section XIII - Disposal Considerations Section XIV - Transport Information
Special shipping information: None
Dispose of product only by methods approved by federal, state, and local regulations.
Section XV - Regulatory Information Section XVI - Other Information
N/A Format and Preparation Complies with ANSI Z400.1-1993
Revision Date: 03-03-2003
We believe said statements, technical information and recommendations contained herein are reliable. Statements contained herein are given without warranty or
guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.