Safety Data Sheet
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: 962-LINE POWDER COATING REPAIR KIT (METALLIC COLOUR)
Recommended Use: Touch up lacquer for powder coated parts. Applied by applicator.
Supplier: Dulux Powder & Industrial Coatings, a division of DuluxGroup (New Zealand) Pty Ltd
ABN 55 133 404 118
Co. 2355191
Street Address: 31B Hillside Road
Auckland, New Zealand
Telephone Number: +64 09 441 8244
Facsimile: +64 09 441 8242
Emergency Telephone: 0 800 734 607 (ALL HOURS)
2. HAZARDS IDENTIFICATION
Classified as a Dangerous Good according to NZS 5433:2007 Transport of Dangerous Goods on Land.
Classified as hazardous according to criteria in the HS (Minimum Degrees of Hazard) Regulations 2001.
Subclasses:
Subclass 3.1 Category B (high hazard) - Flammable Liquids.
Subclass 6.1 Category D - Substances which are acutely toxic.
Subclass 6.3 Category A - Substances that are irritating to the skin.
Subclass 6.4 Category A - Substances that are irritating to the eye.
Subclass 6.8 Category B - Substances that are suspected human reproductive or developmental toxicants.
Subclass 6.9 Category B - Substances that are harmful to human target organs or systems.
Subclass 9.1 Category D - Substances that are slightly harmful to the aquatic environment or are otherwise designed for
biocidal action.
Subclass 9.3 Category C - Substances that are harmful to terrestrial vertebrates.
Surface Coatings and Colourants (Flammable) Group Standard 2006
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 1 of 8
Safety Data Sheet
Hazard and Precautionary Information:
Danger.
Highly flammable liquid and vapour. Harmful if swallowed. Causes skin irritation. Causes eye irritation. Suspected of
damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. Harmful
to aquatic life with long lasting effects. Harmful to terrestrial vertebrates. Keep out of reach of children. Read label
before use. Read Safety Data Sheet before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking.
Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof
electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static
discharge. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Wear
protective gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required.
Avoid release to the environment. In case of fire: Use extinguishing media as outlined in Section 5 of this Safety Data
Sheet for extinction. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth.
Do NOT induce vomitting. IF ON SKIN: Wash with plenty of soap and water. Specific treatment (see First Aid
Measures on this Safety Data Sheet). If skin irritation occurs: Get medical advice/attention. Take off contaminated
clothing before re-use. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF exposed or concerned: Get
medical advice/attention. Store in a well-ventilated place. Keep cool. In case of a substance that is in compliance with a
HSNO approval other than a Part 6A (Group Standards) approval, a label must provide a description of one or more
appropriate and achievable methods for the disposal of a substance in accordance with the Hazardous Substances
(Disposal) Regulations 2001. This may also include any method of disposal that must be avoided.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Components CAS Number Proportion Risk Phrases
Toluene 108-88-3 30-60% R11 R38 R48/20 R63
R65 R67
Synthetic polymer(s) - 10-<30% -
Methyl ethyl ketone 78-93-3 10-<30% R11 R36/37 R66 R67
Pigments - 1-<10% -
Xylene 1330-20-7 1-<10% R10 R20/21 R38
Methyl isobutyl ketone 108-10-1 1-<10% R11 R20 R36/37 R66
Ethyl alcohol 64-17-5 1-<10% R11
Cyclohexanone 108-94-1 1-<10% R10 R20
Additives - to 100% -
4. FIRST AID MEASURES
For advice, contact a Poisons Information Centre (e.g. phone Australia 131 126; New Zealand 0800 764 766) or a doctor.
Inhalation:
Remove victim from area of exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining
clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. If patient
finds breathing difficult and develops a bluish discolouration of the skin (which suggests a lack of oxygen in the blood -
cyanosis), ensure airways are clear of any obstruction and have a qualified person give oxygen through a face mask.
Apply artificial respiration if patient is not breathing. Seek immediate medical advice.
Skin Contact:
If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with
running water. A component of this material can be absorbed through the skin with resultant toxic effects. Seek immediate
medical assistance.
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 2 of 8
Safety Data Sheet
Eye Contact:
If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by
a Poisons Information Centre or a doctor, or for at least 15 minutes.
Ingestion:
Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water. Seek immediate medical
assistance.
Medical attention and special treatment:
Treat symptomatically.
5. FIRE FIGHTING MEASURES
Hazards from combustion products:
Highly flammable liquid. On burning will emit toxic fumes, including those of oxides of carbon .
Precautions for fire fighters and special protective equipment:
Keep containers cool with water spray. If safe to do so, remove containers from path of fire. Fire fighters to wear self-
contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion.
Suitable Extinguishing Media:
Alcohol resistant foam is the preferred firefighting medium but, if it is not available, normal protein foam can be used.
Hazchem Code: ?3YE
6. ACCIDENTAL RELEASE MEASURES
Emergency procedures:
If contamination of sewers or waterways has occurred advise local emergency services.
Methods and materials for containment and clean up:
Shut off all possible sources of ignition. Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents,
clean up immediately. Wear protective equipment to prevent skin and eye contact and breathing in vapours. Work up
wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert
material). Collect and seal in properly labelled containers or drums for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling: Avoid skin and eye contact and breathing in vapour. May form flammable vapour
mixtures with air. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing switches and
electrical equipment etc) must be eliminated both in and near the work area. Do NOT smoke. Flameproof equipment is
necessary in all areas where this chemical is being used. Nearby equipment must be earthed. Vapour may travel a
considerable distance to source of ignition and flash back.
Conditions for safe storage: Store away from sources of heat or ignition. Store away from incompatible materials
described in Section 10. Keep containers closed when not in use - check regularly for leaks.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 3 of 8
Safety Data Sheet
Occupational Exposure Limits: No value assigned for this specific material by the New Zealand Occupational Safety
and Health Service (OSH). However, Workplace Exposure Standard(s) for constituent(s):
Cyclohexanone: WES-TWA 25 ppm, 100 mg/m3, skin
Ethyl alcohol: 8hr WES-TWA = 1,000 ppm (1,880 mg/m3)
Methyl ethyl ketone: WES-TWA 150 ppm, 445 mg/m3; WES-STEL 300 ppm, 890 mg/m3, bio
Methyl isobutyl ketone: WES-TWA 50 ppm, 205 mg/m3; WES-STEL 75 ppm, 307 mg/m3
Toluene: WES-TWA 50 ppm, 188 mg/m3, skin
As published by the New Zealand Occupational Safety and Health Service (OSH).
WES - TWA (Workplace Exposure Standard - Time Weighted Average) - The eight-hour, time-weighted average
exposure standard is designed to protect the worker from the effects of long-term exposure.
WES - STEL (Workplace Exposure Standard - Short Term Exposure Limits) - The 15 minute average exposure standard.
Applies to any 15 minute period in the working day and is designed to protect the worker against adverse effects of
irritation, chronic or irreversible tissue change, or narcosis that may increase the likelihood of accidents. The WES-STEL
is not an alternative to the WES-TWA; both short-term and eight-hour, time-weighted average exposures should be
determined.
`Sk' Notice - absorption through the skin may be a significant source of exposure. The exposure standard is invalidated if
such contact should occur.
These Exposure Standards are guides to be used in the control of occupational health hazards. All atmospheric
contamination should be kept to as low a level as is workable. These exposure standards should not be used as fine
dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative toxicity.
'bio' - Biological Exposure Index.
Engineering controls:
Ensure ventilation is adequate and that air concentrations of components are controlled below quoted Exposure
Standards. Vapour heavier than air - prevent concentration in hollows or sumps. DO NOT enter confined spaces where
vapour may have collected. Keep containers closed when not in use.
Personal Protective Equipment:
The selection of PPE is dependant on a detailed risk assessment. The risk assessment should consider the work
situation, the physical form of the chemical, the handling methods, and environmental factors.
Orica Personal Protection Guide No. 1, 1998: H - OVERALLS, SAFETY SHOES, CHEMICAL GOGGLES, GLOVES,
RESPIRATOR.
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 4 of 8
Safety Data Sheet
Wear overalls, chemical goggles and impervious gloves. Use with adequate ventilation. If inhalation risk exists wear
organic vapour/particulate respirator or air supplied mask meeting the requirements of AS/NZS 1715 and AS/NZS 1716.
Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective
equipment before storage or re-use.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Viscous liquid
Odour: Solvent
Solubility: Soluble in organic solvents. Insoluble in water.
Specific Gravity: 0.9-1.1 @20癈 (approx.)
Relative Vapour Density (air=1): >1
Vapour Pressure (20 癈): Not available
Flash Point (癈): -7 (Methyl ethyl ketone)
Flammability Limits (%): Not available
Autoignition Temperature (癈): Not available
% Volatile by Weight: Not available
Solubility in water (g/L): Negligible
Melting Point/Range (癈): Not applicable
Boiling Point/Range (癈): Not available
Decomposition Point (癈): Not available
pH: Not applicable
Viscosity: Not available
Evaporation Rate: Not available
10. STABILITY AND REACTIVITY
Chemical stability: Stable under normal conditions of use.
Conditions to avoid: Avoid contact with foodstuffs. Avoid exposure to heat, sources of ignition, and open
flame.
Incompatible materials: Incompatible with oxidising agents.
Hazardous decomposition Oxides of carbon.
products:
Hazardous reactions: Hazardous polymerisation will not occur.
11. TOXICOLOGICAL INFORMATION
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product
label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:
Ingestion: Swallowing can result in nausea, vomiting and central nervous system depression. If
the victim is showing signs of central system depression (like those of drunkeness)
there is greater likelihood of the patient breathing in vomit and causing damage to
the lungs. Breathing in vomit may lead to aspiration pneumonia (inflammation of the
lung).
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 5 of 8
Safety Data Sheet
Eye contact: An eye irritant.
Skin contact: Contact with skin will result in irritation. Will have a degreasing action on the skin.
Repeated or prolonged skin contact may lead to irritant contact dermatitis.
Component/s of this material can be absorbed through the skin with resultant toxic
effects.
Inhalation: Material may be irritant to the mucous membranes of the respiratory tract (airways).
Breathing in vapour can result in headaches, dizziness, drowsiness, and possible
nausea. Breathing in high concentrations can produce central nervous system
depression, which can lead to loss of co-ordination, impaired judgement and if
exposure is prolonged, unconsciousness.
Long Term Effects:
No information available for the product. For Toluene (1) : Evidence indicates that repeated or prolonged exposure to this
chemical could result in central nervous system disorders.
Toxicological Data: No LD50 data available for the product. For the constituent Toluene (1):
Oral LD50 (rat): 636 mg/kg
Inhalation LC50 (rat): 49 gm/m3/4 hr
SKIN: Moderate irritant (rabbit).
12. ECOLOGICAL INFORMATION
Ecotoxicity Avoid contaminating waterways.
13. DISPOSAL CONSIDERATIONS
Disposal methods:
Refer to Waste Management Authority. Dispose of material through a licensed waste contractor. Advise flammable
nature. Normally suitable for incineration by an approved agent.
14. TRANSPORT INFORMATION
Road and Rail Transport
Classified as a Dangerous Good according to NZS 5433:2007 Transport of Dangerous Goods on Land.
FLAMMABLE
LIQUID
3
UN No: 1263
Class-primary 3 Flammable Liquid
Packing Group: II
Proper Shipping Name: PAINT
Hazchem Code: ?3YE
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 6 of 8
Safety Data Sheet
Marine Transport
Classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for
transport by sea; DANGEROUS GOODS.
UN No: 1263
Class-primary: 3 Flammable Liquid
Packing Group: II
Proper Shipping Name: PAINT
Air Transport
Classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods
Regulations for transport by air; DANGEROUS GOODS.
UN No: 1263
Class-primary: 3 Flammable Liquid
Packing Group: II
Proper Shipping Name: PAINT
15. REGULATORY INFORMATION
Classification:
Classified as hazardous according to criteria in the HS (Minimum Degrees of Hazard) Regulations 2001.
Subclasses:
Subclass 3.1 Category B (high hazard) - Flammable Liquids.
Subclass 6.1 Category D - Substances which are acutely toxic.
Subclass 6.3 Category A - Substances that are irritating to the skin.
Subclass 6.4 Category A - Substances that are irritating to the eye.
Subclass 6.8 Category B - Substances that are suspected human reproductive or developmental toxicants.
Subclass 6.9 Category B - Substances that are harmful to human target organs or systems.
Subclass 9.1 Category D - Substances that are slightly harmful to the aquatic environment or are otherwise designed for
biocidal action.
Subclass 9.3 Category C - Substances that are harmful to terrestrial vertebrates.
Surface Coatings and Colourants (Flammable) Group Standard 2006
16. OTHER INFORMATION
(1) Material Safety Data Sheet - Australia Pty Ltd;
06/ 2009.
Reason(s) for Issue:
Revised Primary SDS
Alignment to HSNO requirements
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 7 of 8
Safety Data Sheet
This safety data sheet has been prepared by SH&E Shared Services.
This SDS summarises to our best knowledge at the date of issue, the chemical health and safety hazards of the material
and general guidance on how to safely handle the material in the workplace. Since DuluxGroup Limited cannot anticipate
or control the conditions under which the product may be used, each user must, prior to usage, assess and control the
risks arising from its use of the material.
If clarification or further information is needed, the user should contact their DuluxGroup representative or DuluxGroup
Limited at the contact details on page 1.
DuluxGroup Limited's responsibility for the material as sold is subject to the terms and conditions of sale, a copy of which
is available upon request.
Product Name: 962-LINE POWDER COATING REPAIR KIT Issued: 10/06/2010
(METALLIC COLOUR)
Substance No: 000014117101 Version: 4
Page 8 of 8
|