Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
February 4th, 2005 David MacKinnon 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 803 - liquid Name: Projector Cooling Fluid
Related Part Numbers: 803-250ML; 803-500ML
Use: For use in cooling projection tubes.
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
100mg/m3
107-21-1 1,2-ethanediol 65 - 80 39.4ppm n/e
3
10mg/m3
56-81-5 1,2,3-propanetriol 35 - 20 10mg/m n/e
Section 3: Hazards Identification
WHMIS Codes: D2B
NFPA Ratings: Health 2 Flammability 1 Reactivity 1
HMIS Ratings: Health 2 Flammability 1 Reactivity 1
Eyes: This product causes irritation, redness, and pain
Skin: May cause skin irritation.
Inhalation: Product may be mildly irritating to the nose, throat and respiratory tract and may cause coughing
and sneezing. May cause kidney damage, metabolic acidosis, accelerated heart rate, low blood
pressure, central nervous system depression, headache, dizziness, diarrhea, nausea and vomiting,
and pulmonary edema. Extreme prolonged exposure may lead to systematic poisoning and death.
Ingestion: Harmful if swallowed.
Chronic: This product may sensitize heart muscle causing cardiac arrhythmia, in rare cases.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline for 20 minutes. Get medical aid if symptoms
persist.
Skin: Remove contaminated clothing. Wash skin with large quantities of soap and water. If irritation,
redness, or a burning sensation develops and persists, obtain medical advice.
Inhalation: Immediately remove from exposure to fresh air. If breathing is difficult, give oxygen. Give artificial
respiration ONLY if breathing has stopped. Give cardiopulmonary resuscitation (CPR) if there is no
breathing AND no pulse. Get medical aid immediately.
Ingestion: Do not attempt to give anything by mouth to an unconscious person. If victim is alert and not
convulsing, rinse out mouth and give 1/2 to 1 glass of water to dilute material. DO NOT induce
vomiting. If spontaneous vomiting occurs, have victim lean forward with head down to avoid
aspiration of vomit, rinse mouth and administer more water. IMMEDIATELY transport victim to an
emergency facility.
PAGE 1 / 4 MSDS Code: 803 - Liquid
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Section 5: Fire Fighting Measures
Autoignition Temperature: 396癈 Flash Point: 116癈 LEL / UEL: 3.2 / 15.3
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Will burn if involved in a fire. Containers may explode in the heat of a fire. Spilled
General Information:
materials may cause floors and contact surfaces to become slippery.
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well ventilated area, away from incompatible
substances.
Section 8: Exposure Controls
Routes of entry: Eyes, ingestion, inhalation, and skin.
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical liquid Odor: mild Solubility: completely Evaporation >1
State: Rate: (ether=1)
Boiling 102癈 Specific 1.12 Vapor >1 PSI Vapor 2.1(Air=1) pH: 10
Point: Gravity: Pressure: @21癈 Density:
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to
Temperatures over 40癈, ignition sources, and incompatible substances.
avoid:
Strong oxidizers, Lewis or mineral acids, materials reactive with hydroxyl bearing
Incompatibilities:
compounds, strong bases, isocyanates, aluminum and its alloys.
Polymerization: Will not occur.
Decomposition: Carbon monoxide, carbon dioxide, aldehydes, acids, and ketones.
PAGE 2 / 4 MSDS Code: 803 - Liquid
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) Repeated skin contact may cause defatting of the skin resulting
in dermatitis.
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in an No
unborn fetus)
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic effects) No
Lethal Exposure Ingestion 4700 Inhalation 10,876 Skin 9,530 mg/Kg
(LC50): mg/m3(/4hrs)
Concentrations: (LD50): mg/kg (LD50): (rabbit)
(rat) (rat)
Section 12: Ecological Information
General Avoid runoff into storms and sewers which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv.: 0 VOC: 0 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
Ground:
Non-regulated
Air:
Non-regulated
Sea:
Non-regulated
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
PAGE 3 / 4 MSDS Code: 803 - Liquid
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Section 15: Regulatory Information Cont.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depletors.
This product does not contain any class 2 ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act.
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: n/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 803 - Liquid
|