MSDS
Material Safety Data Sheet
Product & Company Identification
Product Code: Artisan Solid Surface Adhesive
Trade Name: Joint Adhesive Components A & B
Product Type: Substance
Supplier: Artisan Adhesive
Address: 14747 Artesia Blvd., Suite 5B
La Mirada, CA 90638
Phone Number: (800) 339-0238
Fax Number: (877) 465-7007
Composition / Component Information
Part A.
Acrylic Polymer 1540% CAS Number 9011-14-7
Methyl Methacrylate Monomer 3565% CAS Number 80-62-6
Part B.
Alumina Trihydrate 1040% CAS Number 21645-51-2
Benzoyl Peroxide 37% CAS Number 94-36-0
Dibutyl Phthalate 9397% CAS Number 84-74-2
Hazard Identification
Main Hazards Harmful if swallowed.
Risk of serious damage to eyes.
Health Effects-Eyes Liquid or mist will cause severe conjunctival irritation
and corneal damage.
Health Effects-Skin Material may cause irritation. Repeated or prolonged
contact may produce defatting of the skin leading to
irritation and dermatitis.
Health Effects-Ingestion Swallowing may have the following effects: irritation of
mouth, throat and digestive tract. nausea. difficulty with
breathing. lung damage.
Health Effects-Inhalation Low volatility makes acute effects unlikely at ambient
temperatures.
MSDS
Material Safety Data Sheet
First Aid Measures
First Aid-Eyes Holding the eye open, immediately flood with plenty of water for
at least 15 minutes. Obtain medical attention urgently.
First Aid-Skin Wash skin thoroughly with soap and water. Contaminated clothing
should be washed or dry-cleaned before re-use.
First Aid-Ingestion Wash out mouth with water. (Never administer anything by mouth
if ingestee is losing consciousness, is unconscious or is
convulsing). Do not induce vomiting.
Keep warm and at rest. If there is difficulty in breathing,
give oxygen. If breathing stops or shows signs of failing,
apply artificial respiration. Do not use mouth to mouth ventilation.
Obtain medical attention urgently.
First Aid-Inhalation Remove from exposure. Keep warm and at rest. If there
is difficulty in breathing, give oxygen. If breathing stops
or shows signs of failing, give artificial respiration.
Obtain medical attention.
Advice to Physicians Treat symptomatically.
Fire Fighting Measures
Extinguishing Media Use water spray, alcohol-resistant foam, dry chemical or carbon
dioxide. Keep containers and surroundings cool with water spray.
Unsuitable Media Do not use a water jet.
Special Hazards This product may give rise to hazardous fumes in a fire.
Protective Equipment Wear self contained breathing apparatus.
Accidental Release Measures
Personal Precautions Wear appropriate protective clothing.
Wear respiratory protection.
Environmental Precautions Try to prevent the material from entering drains or water courses.
Advise Authorities if spillage has entered water course, sewer
or has contaminated soil or vegetation.
Spillage Contain and absorb using earth, sand or other inert material.
Transfer into suitable containers for recovery of disposal.
Handling & Storage
Handling Keep container tightly closed when not in use. Use in well
ventilated area. Avoid inhaling vapor. Avoid contact with eyes,
skin and clothing. Emergency shower and eye wash facilities
should be readily available.
Storage Storage area should be cool, dry, and well ventilated.
MSDS
Material Safety Data Sheet
Exposure Controls / Personal Protection
Occupational Exposure Material may cause irritation to mucous membranes, skin burns,
eye corrosion and permanent injury. ( TLV : 100 ppm )
Engineering Control Engineering methods to prevent or control exposure are preferred.
Measures Methods include process or personnel enclosure, mechanical
ventilation (dilution and local exhaust), and control of process
conditions. If engineering controls and work practices are not
effective in preventing or controlling exposure, then suitable
personal protective equipment, which is known to perform
satisfactorily, should be used.
Respiratory Protection Respiratory protection if there is risk of breathing mists or vapors
from heated material.
Hand Protection Rubber or polyethylene gloves.
Eye Protection Chemical goggles must be worn during all handling operations.
Body Protection If there is danger of splashing, wear impermeable suit.
Ventilation During application, adequate ventilation must be provided.
Physical & Chemical Properties
Part A
Physical State Viscous liquid
Color Various
Odor Acrylic
Boiling Point 101
Flash Point (TOC) 10
Ignition Temperature 430
Explosion Limits Lower 2.1%, Upper 12.5%
Solubility in Water Slightly soluble
Vapor Density 3.42
Specific gravity 1.2
Viscosity (CPS) 20,000 at 23. (typical)
Part B
Physical State Viscous liquid
Color Transparent
Odor Mild
Flash Point (TOC) 100
Ignition Temperature No data available
Explosion Limits No data available
Solubility in Water Insoluble
Specific gravity 1.1
MSDS
Material Safety Data Sheet
Stability & Reactivity
Part A
Stability Stable under normal conditions.
Condition to avoid Heat, spark, flames and other sources of ignition.
Materials to avoid Oxidizing agents. Air.
Hazardous Decomposition Combustion will generate : oxides of carbon and smoke.
Methyl methacrylate monomer.
Hazardous Polymerization Polymers may be formed at high temperature, addition of
oxidizing materials or direct sunlight.
Part B
Stability Stable under normal conditions.
Condition to avoid Heat, spark, flames and other sources of ignition.
Materials to avoid Amine, strong acid.
Hazardous Polymerization Combustion will generate : oxides of carbon, smoke.
Toxilogical Information
Acute Toxicity Harmful by ingestion.
Carcinogenicity NTP : None assigned
JARC : None assigned
OSHA : None assigned
Contact Hazard Moderate
Ecological Information
Mobility The product will not dissolve in water.
Persistence/Degradability The product is expected to be partially or slowly biodegradable.
Bio-accumulation The product is not expected to bioaccumulate.
Ecotoxicity No data
Disposal
Product Disposal Dispose of in accordance with all applicable local and national
regulations. Incineration is the recommended method of disposal.
Container Disposal Empty containers may contain hazardous residue.
Labels should not be removed from containers until they have
been cleaned. Contaminated containers must not be treated
as household waste. Containers should be disposed of by landfill
or incineration as appropriate.
MSDS
Material Safety Data Sheet
Transport Information
*** This information relates to the kit as a whole ( Component A, Component B )
ADR / RID - Class UN-NO 1133 Class 3 Item 5(C)
Proper shipping name : Adhesives
Term-Card R-30G80 ADR/RID Labels : 3
ICAO - Class UN-NO 1133 Class 3 Subrisks
Proper shipping name : Adhesives
Packing Group ICAO Labels : Flammable liquid
Regulatory Information
Labelling Information Warning : Flammable, Irritant.
Contents : Methyl Methacrylate, Alumina Trihydrate
Common name : ARTISAN ADHESIVE COMPONENT A & B
Caution Always wear safety goggles and protective gloves.
Keep away from children.
ARTISAN ADHESIVE should be stored in a cool and dark area.
Avoid breathing vapor and use only with adequate ventilation.
Keep away from heat, sparks, open flame and other combustible
materials. Avoid contact with eyes, skin and clothing.
Wash thoroughly after handling.
MSDS
Material Safety Data Sheet
|