Page : 1
Revision nr : 1
MATERIAL SAFETY DATA SHEET
Date : 21/5/2006
Supersedes : 0/0/0
Gulf ATF Type A 04104
1. Identification of the product and the company
Trade name : Gulf ATF Type A
Use : Automatic Transmission Fluid
th
Company identification : Gulf Oil Corporation Limited, IN Centre, 12 Road, Marol, Andheri
(East), Mumbai ?400 093
-
Emergency phone nr : (Provide your company name, address and telephone/fax numbers)
+91 22 66487777
- Company : As Above
2. Information on ingredients
This product is considered to be hazardous and contains hazardous components.
Substance name Value(s) CAS nr EINECS nr EC index CERTIFICATE
Methacrylate copolymer : 1 - 1.1 % ----- ----- ----- Xi; R36
Alkoxylated long chain alkyl amine : < 0.15 % ----- ----- ----- Xn; R22
C; R34
R43
Allyl methacrylate : < 0.1 % 96-05-9 ----- ----- Xi; R36/37/38
R43
N; R50-53
Alkyl alkoxy amine : < 0.1 % ----- ----- ----- C; R34
N; R50-53
Long-chain alkyl dithiothiadiazole : < 0.1 % ----- ----- ----- R43
Barium alkenyl carboxylate : 1.2 - 2.5 % ----- 272-497-4 ----- Xn; R20/22
Zinc alkyl dithiophosphate : 1.2 - 2.5 % 68649-42-3 272-028-3 ----- Xi; R38
N; R51-53
Barium sulphonate : < 1.25 % ----- 263-140-3 ----- Xn; R20/22
Xi; R38
R53
3. Hazards identification
Main hazards : Classified as a dangerous preparation according to 1999/45/EC.
Adverse human health effects : Not expected under normal conditions
Environmental hazards : Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic
environment
4. First aid measures
- Inhalation : If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention if symptoms appear.
- Skin contact : Wash with soap and water. Get medical attention if irritation occurs.
- Eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention immediately.
- Ingestion : If affected person is fully conscious, give one glass of water to drink. Never give
Page : 2
Revision nr : 1
MATERIAL SAFETY DATA SHEET
Date : 21/5/2006
Supersedes : 0/0/0
Gulf ATF Type A 04104
4. First aid measures (continued)
anything by mouth to an unconscious person. Get medical attention if symptoms
appear.
5. Fire - fighting measures
Extinguishing media : In case of fire, use water spray (fog), foam, dry chemical, or CO2.
Special exposure hazards : None under normal conditions
Special procedures : Fire fighters should wear positive pressure self-contained breathing apparatus (
SCBA) and full turnout gear.
6. Accidental release measures
Personal precautions : Immediately contact emergency personnel. Keep unnecessary personnel away.
Use suitable protective equipment (Section 8). Follow all fire fighting procedures (
Section 5).
Environmental precautions : If emergency personnel are unavailable, contain spilled material. For small spills
add absorbent (soil may be used in the absence of other suitable materials)
scoop up material and place in a sealed, liquid-proof container for disposal. For
large spills dike spilled material or otherwise contain material to ensure runoff
does not reach a waterway. Place spilled material in an appropriate container for
disposal. Minimize contact of spilled material with soils to prevent runoff to
surface waterways
7. Handling and storage
Storage : Keep container tightly closed. Keep container in a cool, well-ventilated area.
Handling : Wash throughly after handling.
8. Exposure controls / personal protection
Personal protection
- Respiratory protection : Use appropriate respiratory protection if there is the potential to exceed the
exposure limit(s).
- Hand protection : Use chemical resistant, impervious gloves.
- Skin protection : Disposable outer garments when there is the potential for contact with the
material.
- Eye protection : Safety glasses with side shields. Goggles with a face shield may be necessary
depending on quantity of material and conditions of use.
Occupational Exposure Limits
- United Kingdom : TWA: 5 mg/m3 - 8 hour(s).
Page : 3
Revision nr : 1
MATERIAL SAFETY DATA SHEET
Date : 21/5/2006
Supersedes : 0/0/0
Gulf ATF Type A 04104
9. Physical and chemical properties
Physical state : Liquid
Colour : Red
Odour : Mild
Pour point [癈] : -39
Viscosity at 100癈 [mm?s] : 7.3
Flash point [癈] : 176
Specific gravity : 0.86
10. Stability and reactivity
Physico-chemical stability : Stable
Conditions to avoid : High temperatures, sparks, and open flames.
Materials to avoid : Strong oxidizing and reducing agents.
Hazardous decomposition products : These products are carbon oxides (CO, CO2). Some metallic oxides.
11. Toxicological information
Acute toxicity
- Inhalation : Inhalation of oil mist or vapors at elevated temperatures may cause respiratory
irritation.
- Dermal : Non-irritating to the skin.
- Ingestion : Not determined.
Chronic toxicity : Not expected to be toxic
Carcinogenicity : Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.
Mutagenicity : Not expected to be a mutagenic hazard
12. Ecological information
Ecological effects information : Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic
environment. Based on calculation. This product contains components which may
be persistent in the environment.
13. Disposal considerations
Disposal : Waste must be disposed of in accordance with federal, state and local
environmental control regulations.
14. Transport information
General information : Not regulated
- UN No. : Not regulated
Page : 4
Revision nr : 1
MATERIAL SAFETY DATA SHEET
Date : 21/5/2006
Supersedes : 0/0/0
Gulf ATF Type A 04104
14. Transport information (continued)
- ADR/RID : Not regulated
- IMO-IMDG code : Not regulated
- ICAO/IATA : Not regulated
15. Regulatory information
Symbol(s) : None.
R Phrase(s) : R52/53 : Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
S Phrase(s) : S29/35 : Do not empty into drains ; dispose of this material and its container in a
safe way.
S61 : Avoid release to the environment. Refer to special instructions/Safety data
sheets.
16. Other information
R-phrases listed in chapter 2 : R20/22 : Harmful by inhalation and if swallowed.
R22 : Harmful if swallowed.
R34 : Causes burns.
R36 : Irritating to eyes.
R36/37/38 : Irritating to eyes, respiratory system and skin.
R38 : Irritating to skin.
R43 : May cause sensitization by skin contact.
R50/53 : Very toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
R51/53 : Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
R53 : May cause long-term adverse effects in the aquatic environment.
Product information : For specific or detailed technical data for this product, please contact your local
sales representative.
Note : To the best of our knowledge and belief, the information and recommendations
provided in this MSDS are correct. We make no warrany whatsoever, expressed or
implied of merchantability or fitness for the particular purpose, regarding the
accuracy of such data or the results to be obtained from the use thereof. We do
not assume any liability for consequences of the uses of this information since it
may be applied under conditions beyond our control or knowledge. The
information is furnished on the condition that the recipients shall make their own
decision as to safety and suitability of the material for their purposes. We will not
be responsible for damages of any nature resulting from the use or reliance upon
the information and recommendations. If you have purchased this product for
supply to a third party, it is your duty to pass on to that third party the information
given in this Data Sheet. If the third party is not an employer it is his duty to pass
the information given in the Data Sheet to the employer of whoever uses or
handles this product. It is an employer's duty to advise and instruct his employees
handling this product (and others who may be affected) , of any hazards described
in the Data Sheet and of any precautions which should be taken to ensure safe
Page : 5
Revision nr : 1
MATERIAL SAFETY DATA SHEET
Date : 21/5/2006
Supersedes : 0/0/0
Gulf ATF Type A 04104
16. Other information (continued)
handling of the product.
The contents and format of this MSDS are in accordance with EEC Commission Directive 93/112/EEC.
DISCLAIMER OF LIABILITY The information in this MSDS was obtained from sources which we believe are reliable. However,
the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of
handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other
reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any
way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for
this product. If the product is used as a component in another product, this MSDS information may not be applicable.
End of document
|