MATERIAL SAFETY DATA SHEET
110-BRUSHLAQ 680-CLEAR-GLOSS Page: 1
PRODUCT NAME: 110-BRUSHLAQ 680-CLEAR-GLOSS HMIS CODES: H F R P
PRODUCT CODE: 110-BRUSH LAQ 230H
================== SECTION I - MANUFACTURER IDENTIFICATION =================
MANUFACTURER'S NAME: WOOD KOTE PRODUCTS INC.
ADDRESS : 8000 NE 14TH PLACE
PORTLAND, OR 97211
EMERGENCY PHONE : (800) 535-5053 DATE PRINTED : 07/17/07
INFORMATION PHONE : (503) 285-8371 NAME OF PREPARER : C. JENKINS
========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========
VAPOR PRESSURE WEIGHT
REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT
---------------------------------------------------------------------------------------------------
* XYLENE 1330-20-7 6.0 68 F 25 TO 35
OSHA TWA 100ppm
MINERAL SPIRITS 64742-88-7 <5 68 F 10 TO 15
100 PPM ACGIH TLV
100 PPM OSHA PEL
ISOPROPANOL 67-63-0 32 68 F 10 TO 15
OSHA TWA:400 PPM
ACGIH TLV:400 PPM
* ETHYLENE GLYCOL N-BUTYL ETHER 111-76-2 .8 68 F 10 TO 15
ACGIH TWA: 20ppm
OSHA PEL: 50ppm (SKIN)
ISOBUTYL ACETATE 110-19-0 12.5 68 F 0 TO 10
150 PPM TWA, OSHA & ACGIH
ISOBUTYL ISOBUTYRATE 000097-85-8 3 68 F 0 TO 10
TLV: 100ppm
* 2-HEPTANONE 110-43-0 2.1 68 F 0 TO 10
OSHA PEL: 100ppm
ACGIH TWA: 50ppm
SOLVENT NAPHTHA, LIGHT ALIPHATIC 64742-89-8 7.7 68 F 0 TO 10
OSHA PEL 300 PPM
ACGIH TLV 300 PPM
BUTYL BENZYL PHTHALATE 85-68-7 0.16 302 F
OSHA PEL: 5 MG/M3
ACGIH TLV: 5MG/M3
* INDICATES TOXIC CHEMICAL(S) SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III AND
OF 40 CFR 372.
=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============
BOILING RANGE: 181 F - 464 F SPECIFIC GRAVITY (H2O=1): 0.82
VAPOR DENSITY: HEAVIER THAN AIR EVAPORATION RATE: SLOWER THAN BUTYL
ACETATE
COATING V.O.C.: 613 g/l MATERIAL V.O.C.: 613 g/l
SOLUBILITY IN WATER: NON SOLUBLE
APPEARANCE AND ODOR: TRANSLUCENT, TYPICAL LACQUER SOLVENT ODOR
================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============
FLASH POINT: 50 F METHOD USED: PMCC
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: .01 UPPER: 12.7
EXTINGUISHING MEDIA: FOAM, CO2, DRY CHEMICAL, WATER FOG
MATERIAL SAFETY DATA SHEET
110-BRUSHLAQ 680-CLEAR-GLOSS Page: 2
SPECIAL FIREFIGHTING PROCEDURES
DO NOT ENTER ANY ENCLOSED OR CONFINED FIRE SPACE WITHOUT PROPER PROTECTIVE
EQUIPMENT INCLUDING SELF-CONTAINED BREATHING APPARATUS. DANGER: EXTREMELY
FLAMMABLE. CLEAR FIRE AREA OF UNPROTECTED PERSONNEL. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL GEAR, INCLUDING A POSITIVE PRESSURE NIOSH APPROVED SCBA. COOL
FIRE EXPOSED CONTAINERS WITH WATER. WHEN HEATED ABOVE THE FLASH POINT THIS
MATERIAL EMITS FLAMMABLE VAPORS WHICH, WHEN MIXED WITH AIR, CAN BURN OR BE
EXPLOSIVE. FINE MIST OR SPRAY MAY BE FLAMMABLE AT TEMPERATURES BELOW THE FLASH
POINT.
UNUSUAL FIRE AND EXPLOSION HAZARDS
HANDLE AS FLAMMABLE LIQUID. VAPORS FORM AN EXPLOSIVE MIXTURE IN AIR BETWEEN THE
UPPER AND LOWER EXPLOSIVE LIMITS WHICH CAN BE IGNITED BY MANY SOURCES SUCH AS
PILOT LIGHTS, OPEN FLAMES, ELECTRICAL MOTORS AND SWITCHES. UNOPENED CONTAINERS
EXPOSED TO EXTREME HEAT MAY BUILD UP PRESSURE AND EXPLODE. USE WATER FOG TO
COOL UNOPENED CONTAINERS. VAPORS ARE HEAVIER THAN AIR AND MAY TRAVEL ALONG THE
GROUND OR BE MOVED BY VENTILATION AND IGNITED BY HEAT, PILOT LIGHTS, OTHER
FLAMES OR IGNITION SOURCES AT LOCATIONS DISTANT FROM MATERIAL HANDLING POINT.
======================== SECTION V - REACTIVITY DATA =======================
STABILITY: STABLE - AVOID EXPOSURE TO EXCESSIVE HEAT.
CONDITIONS TO AVOID
EXCESSIVE HEAT, POOR VENTILATION AND IGNITION SOURCES.
INCOMPATIBILITY (MATERIALS TO AVOID)
AVOID STRONG OXIDIZERS, STRONG ACIDS, AND STRONG BASES. AVOID HALOGENS AND
ALKANOLAMINES AS WELL.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
NORMAL COMBUSTION FORMS CARBON MONOXIDE, CARBON DIOXIDE, AND NITROGEN OXIDES.
OTHER ORGANIC COMPOUNDS MAY ALSO BE FORMED. SILICON DIOXIDE AND FORMALDEHYDE
MAY ALSO BE FORMED.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
==================== SECTION VI - HEALTH HAZARD DATA =======================
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
OVEREXPOSURE TO VAPORS MAY RESULT IN CENTRAL NERVOUS SYSTEM DEPRESSION
CHARACTERIZED BY DIZZINESS, STAGGERING GAIT, LOSS OF COORDINATION, HEADACHE,
NAUSEA. VICTIM MAY EXPERIENCE DIFFICULTY IN BREATHING, AND EVEN LOSS OF
CONSCIOUSNESS.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
MILDLY IRRITATING TO THE SKIN. PROLONGED OR REPEATED LIQUID CONTACT CAN RESULT
IN DEFATTING AND DRYING OF THE SKIN. SEVERELY IRRITATING TO THE EYES. HIGH
VAPOR CONCENTRATIONS MAY BE IRRITATING.
MATERIAL SAFETY DATA SHEET
110-BRUSHLAQ 680-CLEAR-GLOSS Page: 3
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
SKIN ABSORPTION OF SOLVENTS OVER AN EXTENDED PERIOD OF TIME MAY PRODUCE CENTRAL
NERVOUS SYSTEM DEPRESSION WITH PHYSIOLOGICAL EFFECTS SIMILAR TO THAT OF
INHALATION, INCLUDING DIZZINESS, NAUSEA, HEADACHE, AND LOSS OF COORDINATION.
SEE SECTION II HAZARDOUS INGREDIENTS.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
LIQUID IS MODERATELY TOXIC AND MAY BE HARMFUL OR FATAL IF SWALLOWED. INGESTION
MAY CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION, NAUSEA, VOMITING, AND
GASTROINTESTINAL IRRITATION. ASPIRATION INTO LUNGS MAY CAUSE CHEMICAL
PNEUMONITIS, EDEMA.
HEALTH HAZARDS (ACUTE AND CHRONIC)
REPEATED OR PROLONGED OCCUPATIONAL EXPOSURE MAY CAUSE IRRITATION TO THE EYES,
NOSE, THROAT, AND RESPIRATORY TRACT; DEFATTING AND DERMITITIS OF THE SKIN,
DAMAGE TO THE BRAIN, NERVOUS SYSTEM, LIVER, KIDNEYS, LUNGS, SPLEENS, AND BLOOD.
INGESTION OF THIS MATERIAL MAY BE HARMFUL OR FATAL. INHALATION IN EXCESS OF THE
THRESHOLD LIMIT VALUES OVER AN EXTENDED PERIOD OF TIME CAN LEAD TO CENTRAL
NERVOUS SYSTEM DEPRESSION, HEADACHE DIZZINESS, UNCONSCIOUSNESS, AND EVEN DEATH.
CARCINOGENICITY: NTP CARCINOGEN: NO IARC MONOGRAPHS: ETHYLBENZENE IS A 2B
CARCINOGEN. OSHA REGULATED: YES
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
PRE-EXISTING EYE, SKIN AND RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
EMERGENCY AND FIRST AID PROCEDURES
INHALATION-MOVE PERSON TO FRESH AIR. IF BREATHING STOPS, APPLY ARTIFICIAL
RESPIRATION AND SEEK IMMEDIATE MEDICAL ATTENTION. EYE CONTACT-FLUSH WITH LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MINUTES. SKIN CONTACT-WASH AFFECTED AREA
THOROUGHLY WITH SOAP AND WATER. INGESTION-DO NOT INDUCE VOMITING. CONTACT
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY. NOTE:
INGESTION OR SUBSEQUENT VOMITING CAN RESULT IN ASPIRATION OF LIGHT HYDROCARBON
LIQUID WHICH CAN CAUSE PNEUMONITIS.
=========== SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ============
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
ELIMINATE ALL SOURCES OF IGNITION (FLARES, FLAMES INCLUDING PILOT LIGHTS AND
ELECTRICAL SPARKS) VENTILATE AREA OF LEAK OR SPILL. CLEAN-UP PERSONNEL REQUIRE
PROTECTIVE CLOTHING AND RESPIRATORY PROTECTION FROM VAPORS. STOP SPILL AT
SOURCE, DIKE AREA TO PREVENT SPREADING AND ABSORB LIQUID WITH SAND, CLAY OR
OTHER ABSORBENT MATERIAL AND PUT INTO CONTAINERS FOR DISPOSAL. PREVENT RUN-OFF
TO SEWERS, STREAMS, OR OTHER BODIES OF WATER.
WASTE DISPOSAL METHOD
THE PREFERRED OPTIONS FOR DISPOSAL ARE TO SEND TO LICENSED RECLAIMERS OR TO
PERMITTED INCINERATORS. ANY DISPOSAL PRACTICE MUST BE IN COMPLIANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
MATERIAL SAFETY DATA SHEET
110-BRUSHLAQ 680-CLEAR-GLOSS Page: 4
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
KEEP AWAY FROM HEAT SPARKS AND OPEN FLAME. STORE IN A COOL DRY AREA. KEEP
CONTAINERS CLOSED WHEN NOT IN USE. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT
OF REACH OF CHILDREN. EMPTY CONTAINERS RETAIN PRODUCT RESIDUE AND CAN BE
DANGEROUS.
OTHER PRECAUTIONS
DO NOT PRESSURIZE, CUT OR WELD, DRILL, GRIND, OR EXPOSE CONTAINERS TO HEAT,
SPARKS, OPEN FLAME OR OTHER SOURCES OF IGNITION.
===================== SECTION VIII - CONTROL MEASURES ======================
RESPIRATORY PROTECTION
AVOID PROLONGED OR REPEATED BREATHING OF VAPORS. IF EXPOSURE MAY OR DOES EXCEED
OCCUPATIONAL EXPOSURE LIMITS (SEC II) USE A NIOSH-APPROVED RESPIRATOR TO PREVENT
OVEREXPOSURE. IN ACCORDANCE WITH 29 CFR 1910.134 USE EITHER AN AIR PURIFYING
RESPIRATOR FOR ORGANIC VAPORS OR AN AIR SUPPLIED SELF CONTAINED BREATHING
APPARATUS.
VENTILATION
LOCAL EXHAUST SHOULD BE SUFFICIENT TO KEEP VAPORS BELOW THE THRESHOLD LIMIT
VALUES. OPEN DOORS AND WINDOWS TO PROVIDE FRESH AIR ENTRY AND TO PREVENT VAPOR
BUILD-UP.
PROTECTIVE GLOVES
IMPERMEABLE CHEMICAL HANDLING GLOVES SHOULD BE USED FOR SKIN PROTECTION.
EYE PROTECTION
USE CHEMICAL SAFETY GLASSES, GOGGLES, OR FACESHIELDS FOR EYE PROTECTION.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
USE IMPERMEABLE APRONS AND PROTECTIVE CLOTHING WHENEVER POSSIBLE TO PREVENT SKIN
CONTACT. EYE WASH AND SAFETY SHOWERS IN THE WORKPLACE ARE RECOMMENDED.
WORK/HYGIENIC PRACTICES
WASH WITH SOAP AND WATER BEFORE EATING, DRINKING, SMOKING, OR USING RESTROOMS.
========================= SECTION IX - DISCLAIMER ==========================
THE INFORMATION CONTAINED HEREIN IS BASED ON DATA AVAILABLE TO US AND IS
BELIEVED TO BE CORRECT. WOOD KOTE PRODUCTS MAKES NO WARRANTY, EXPRESSED OR
IMPLIED REGARDING THE ACCURACY OF THESE DATA OR THE RESULTS TO BE OBTAINED FROM
THE USE THEREOF. WOOD KOTE PRODUCTS ASSUMES NO RESPONSIBILITY FOR INJURY FROM
THE USE OF THE PRODUCT DESCRIBED HEREIN.
|