Section 1 Identification |
Product Number: | C1622 |
Health: | 2 |
Flammability | 0 |
Reactivity | 0 |
Hazard Rating:
Least | Slight | Moderate | High | Extreme |
0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
Product Name: | Copper Sulfate Solution 20% w/v Aqueous |
Trade/Chemical Synonyms | |
Formula: | N/A |
RTECS: | none |
C.A.S | See Below |
Section 2 Component Mixture |
Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | v/v | None Established |
|
Cupric Sulfate | CAS# 7758-99-8 | 20% | W/V | OSHA TWA 1 mg(Cu)/m? |
|
Section 3 Hazard Identification (Also
see section 11) |
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed. |
Section 4 First Aid Measures |
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
|
Section 5 Fire Fighting Measures |
Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
Fire/Explosion Hazards: | None Known. |
Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
Section 6 Accidental Release
Measures |
Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.
|
Section 7 Handling and
Storage |
Store in a cool dry place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling |
Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
Section 9 Physical and Chemical Properties |
Melting Point: | Information not available | Specific Gravity | information not available
|
Boiling Point: | Information not available |
Percent Volatile by Volume: | 80% |
Vapor Pressure: | Information not available |
Evaporation Rate: | information not available |
Vapor Density: |
Information not available |
Evaporation Standard: |
|
Solubility in Water: |
Soluble |
Auto ignition Temperature: |
Not applicable |
Appearance and Odor: |
Clear blue liquid, odorless |
Lower Flamm. Limit in Air: |
Not applicable |
Flash Point: |
not flammable |
Upper Flamm. Limit in Air: |
Not applicable |
|
Section 10 Stability and Reactivity Information |
Stability: Stable | Conditions to Avoid: Avoid contact with heat, incompatibles |
Materials to Avoid: Oxidizing materials, reducing agents, magnesium |
Hazardous Decomposition Products: oxides of sulfur |
Hazardous Polymerization:not known to occur |
Condition to Avoid:None known |
|
Section 11
Additional Information |
Causes irritation of eyes, skin and respiratory tract. Conditions aggravated/target organs: Persons with pre-existing eye, skin or respiratory conditions may be more susceptible. |
DOT Classification: Environmentally hazardous substances, Liquid (Cupric Sulfate) 9, UN3082, PG III |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|