Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene
CAS  
:
 1468-83-33-Acetylthiophene<-td>
SYNONYMS  
:
 Methyl 2-Thienyl Ketone; 1-(2-Thienyl)ethanone.

Section 1 - Chemical Product and Company Identification
MSDS Name: 2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene
Catalog Numbers: AC294830000, AC294830010, AC294831000
Synonyms:
Methyl 2-Thienyl Ketone; 1-(2-Thienyl)ethanone.
Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
88-15-32-Acetylthiophene 98 201-804-6
1468-83-33-Acetylthiophene 2.0 215-996-4

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: colorless or slight yellow liquid. Flash Point: 91 deg C.
Caution! Stench. Combustible liquid and vapor. May cause eye and skin irritation. May cause respiratory and digestive tract irritation. May cause central nervous system depression.
Target Organs: Central nervous system.


Potential Health Effects
Eye: May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Skin: May cause irritation and dermatitis. May cause cyanosis of the extremities.
Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation: The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic: No information found.

Section 4 - First Aid Measures


Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: 91 deg C ( 195.80 deg F)
Autoignition Temperature: Not available.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 1; Flammability: 2; Instability: 0

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Section 7 - Handling and Storage


Handling: Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage: Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
2-Acetylthiophene none listed none listed none listed
3-Acetylthiophene none listed none listed none listed

OSHA Vacated PELs: 2-Acetylthiophene: No OSHA Vacated PELs are listed for this chemical. 3-Acetylthiophene: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Liquid
Appearance: colorless or slight yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 214 deg C @ 760.00mm Hg
Freezing/Melting Point:10 - 11 deg C
Decomposition Temperature:Not available.
Solubility: Not available.
Specific Gravity/Density:1.1680g/cm3
Molecular Formula:(C4H3S)COCH3
Molecular Weight:126.17

Section 10 - Stability and Reactivity


Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials: Strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 88-15-3: OB6300000      
CAS# 1468-83-3 unlisted.
LD50/LC50:
Not available.
Not available.

Carcinogenicity:
CAS# 88-15-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
CAS# 1468-83-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information found.
Teratogenicity: No information found.
Reproductive Effects: No information found.
Mutagenicity: No information found.
Neurotoxicity: No information found.
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: TOXIC LIQUIDS, ORGANIC, N.O.S. No information available.
Hazard Class: 6.1
UN Number: UN2810
Packing Group: II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 88-15-3 is listed on the TSCA inventory.
     CAS# 1468-83-3 is not listed on the TSCA inventory.      It is for research and development use only.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 88-15-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
     CAS# 1468-83-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
      Not available.
Risk Phrases:


Safety Phrases:

     S 24/25 Avoid contact with skin and eyes.
     S 37 Wear suitable gloves.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).
     S 28A After contact with skin, wash immediately with plenty of
     water.

WGK (Water Danger/Protection)

     CAS# 88-15-3: No information available.
     CAS# 1468-83-3: No information available.
Canada - DSL/NDSL
     CAS# 88-15-3 is listed on Canada's DSL List.
Canada - WHMIS
     This product has a WHMIS classification of B3.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 9/02/1997
Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
(S)-(-)-5-(Hydroxymethyl)-2(5H)-furanone, 99% (99% e.e.) 78508-96-0
2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene 1468-83-33-Acetylthiophene<-td>
Phenylphosphinic acid sodium salt (50% aqueous solution), 46% (titr.) 4297-95-4
m-(Hydrazinosulfonyl)benzoic acid, 99% 7385-52-6
2-Hydroxyquinoline, 99% 59-31-4
Acrylamido Glycolic Acid, Anhydrous, 98% 6737-24-2
Naphthalene-d8, 98+ atom % D 1146-65-2
N-Ethyl-m-toluidine, 99+% 102-27-2
Thiazole, 99% 288-47-1
FerroZine iron reagent, hydrate Not available
1-(4-Methoxyphenyl)-2-methylpiperazine 35947-12-7
7-(2-Chloroethyl)-Theophylline, 97% 5878-61-5
Ammonium hexabromoplatinate(IV) 17363-02-9
2,3-Dibromopropanol, 96% 96-13-9
4-(Methylamino)butyric acid hydrochloride, 99% 6976-17-6
1,3-Propanediol 504-63-2
2-Fluorobenzylamine, 96% 89-99-6
L-Arabinose 5328-37-0
4-N,N-Dimethylaminoazobenzene-4'-isothiocyanate 7612-98-8
DL-aspartic acid magnesium salt tetrahydrate, 98% 215528-79-3
2-Diisopropylaminoethyl chloride hydrochloride 4261-68-1
5-Methoxysalicylic Acid, 98% 2612-02-4
1,2-Benzisoxazole, 95% 271-95-4
2,2'-(1,2-Ethenediyldi-4,1-Phenylene)- Bisbenzoxazole 1533-45-5
6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline-1-Thione, 99% 24456-59-5
3,3'-Dichloropivalic acid, 99% 67329-11-7
3-Indoleacrylic acid, 99% 1204-06-4
1,2,3,6,7,8-Hexahydropyrene 1732-13-4
9H-fluorene-4-carboxylic acid 6954-55-8
Methylamine Hydrochloride, P.A. 593-51-1
Potassium superoxide (chunks) 12030-88-5
N-Methyl-N-(trimethylsilyl)acetamide 7449-74-3
1-[4,4-Bis(4-fluorophenyl)butyl]piperazine 5631-35-6
2-(2-Hydroxyethyl)Pyridine, 99% 103-74-2
Scandium(iii)nitrate hydrate, 99.9% Not available
9,10-Diphenylanthracene 1499-10-1
Nocodazole 99+% 31430-18-9
1-Octanesulfonic acid sodium salt 5324-84-5
Barium perchlorate, anhydrous, 99% 13465-95-7
N,N-Dibutylaniline, 99% (GC) 613-29-6
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc) 13098-39-0
2-Biphenylyl Glycidyl Ether, 95% 7144-65-2
2,4-Dichlorobenzamide, 98% 2447-79-2
Isobutyl methacrylate, 99%, stabilized with 15-20 ppm MEHQ 97-86-9
Picolinic acid n-oxide, 97% 824-40-8
N,n'-dimethylpiperazine, 98% 106-58-1
1,4-Dichlorobutane 110-56-5
1-Acetyl-4-piperidinecarboxylic acid 25503-90-6
alpha,alpha,alpha-Trifluoro-o-cresol 444-30-4
Trans 2, cis 6-nonadienal diethylacetal, 80% 67674-36-6



HBCChem,Inc

Chemical Information Net Copyright Reserved