Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 3-Methyl-2-pentanol, 99%
CAS  
:
 565-60-6
SYNONYMS  
:
 

Section 1 - Chemical Product and Company Identification
MSDS Name: 3-Methyl-2-pentanol, 99%
Catalog Numbers: AC149970000, AC149970100
Synonyms:

Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
565-60-6 3-Methyl-2-pentanol 99 209-281-6

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: clear, colorless liquid. Flash Point: 40 deg C.
Warning! Flammable liquid and vapor. Causes respiratory tract irritation. May cause eye and skin irritation. May cause digestive tract irritation. May cause central nervous system depression.
Target Organs: Central nervous system.


Potential Health Effects
Eye: May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Skin: May cause irritation and dermatitis. May cause cyanosis of the extremities.
Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Ingestion of large amounts may cause CNS depression.
Inhalation: Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Chronic: No information found.

Section 4 - First Aid Measures


Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Containers may explode in the heat of a fire. Flammable liquid and vapor. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Use agent most appropriate to extinguish fire. Do NOT use straight streams of water.
Flash Point: 40 deg C ( 104.00 deg F)
Autoignition Temperature: Not applicable.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 1; Flammability: 2; Instability: 0

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Section 7 - Handling and Storage


Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage: Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
3-Methyl-2-pentanol none listed none listed none listed

OSHA Vacated PELs: 3-Methyl-2-pentanol: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Liquid
Appearance: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: 3.52
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 134 deg C @ 760.00 mmHg
Freezing/Melting Point:Not available.
Decomposition Temperature:Not available.
Solubility: Not available.
Specific Gravity/Density:0.8310 g/cm3
Molecular Formula:C6H14O
Molecular Weight:102.18

Section 10 - Stability and Reactivity


Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 565-60-6 unlisted.
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 565-60-6: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information found
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found
Neurotoxicity: No information found
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: DOT regulated - small quantity provisions apply (see 49CFR173.4) No information available.
Hazard Class:
UN Number:
Packing Group:

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 565-60-6 is not listed on the TSCA inventory. It is for research and development use only.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 565-60-6 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     XI
Risk Phrases:

     R 10 Flammable.
     R 37 Irritating to respiratory system.

Safety Phrases:

     S 16 Keep away from sources of ignition - No smoking.
     S 24/25 Avoid contact with skin and eyes.
     S 33 Take precautionary measures against static discharges.
     S 37 Wear suitable gloves.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).
     S 9 Keep container in a well-ventilated place.
     S 28A After contact with skin, wash immediately with plenty of water
     .

WGK (Water Danger/Protection)

     CAS# 565-60-6: No information available.
Canada - DSL/NDSL
None of the chemicals in this product are listed on the DSL or NDSL list.
Canada - WHMIS
     This product has a WHMIS classification of B3, D2B.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 9/02/1997
Revision #6 Date: 10/03/2005

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
4-tert-Butylcalix (4) Arene, 99% (TLC) 60705-62-6
O-Methoxybenzylamine, 98% 6850-57-3
3-Bromo-1-propanol, 92% (GC) 627-18-9
2-Methyl-2-pentanol, 99% 590-36-3
Tartrazine 1934-21-0
Cyclohexylamine Hydrochloride, 99% 4998-76-9
Cyclohexylphenylacetic acid, 99% 3894-09-5
Oxazolo[4,5-b]pyridin-2(3h)thione 53052-06-5
3-Nitrobenzyl chloride, 99% (titr.) 619-21-6
Coumarin 153, Laser Grade 53518-18-6
Pentene (Techn) 25377-72-4
Antimony(V)-Pentachloride, Anhydrous, 99% 7647-18-9
4-Biphenylcarboxylic acid 99% 92-92-2
Anhydrotetracycline Hydrochloride,"can be used as Secondary Standard." 13803-65-1
Tetraethylene Glycol Dimethyl Ether, 99% 143-24-8
1,1-Dimethyl-4-phenylpiperazinium iodide, 99% 54-77-3
3-Ethoxymethacrolein, Tech., 95% 42588-57-8
2,6-Diethylaniline, P.A. 579-66-8
3,5-Dimethylanisole, 99% 874-63-5
2-Decalone, Mixture of Cis and Trans, Tech. 4832-17-1
4-Imidazoleacetic Acid Hydrochloride, 99% 3251-69-2
Tris Ortho Xenyl Phosphite, 95% 2752-19-4
Carbobenzyloxyglycine, 98.5% 1138-80-3
(2r,3s)-1-carboxy-4-phenyl-2,3-dihydroxycyclohexa-4,6-diene,potassium salt, 95% Not available
4-(2-Aminoethyl)benzene sulfonamide 35303-76-5
p-Tolylhydrazine hydrochloride 637-60-5
3-Cyanopyridine, 98% 100-54-9
Tetrahydro-4H-pyran-4-one, 99% 29943-42-8
Potassium cyclohexanebutyrate, 16.6-18.8% potassium 62638-03-3
5-Cyanoindole 15861-24-2
Purpurin 81-54-9
Phosphorus(III) iodide, 99+% 13455-01-1
1-Methylindole 603-76-9
2,2-Dichloroacetamide, 93% 683-72-7
1-Ethylpiperazine, 98+% 5308-25-8
Tris(hydroxymethyl)aminomethane hemisulfate, 99% 6992-38-7
1-Chlorohexadecane, ca. 97% 4860-03-1
3-Methyl-2-pentanol, 99% 565-60-6
3-Methyl-5-Methoxycarbonyl-1-Benzyl-4-Piperidone Hydrochloride, 99% Not available
4-Decanol, 99% 2051-31-2
5-Chloro-1,3-dimethoxybenzene, 97+% 7051-16-3
Bis-(Benzonitrile)-Palladium(II)Chloride, 99+% 14220-64-5
N-(1-Anilinonaphthyl-4)-maleimide 50539-45-2
4-Chloro-o-anisic acid, 99% 57479-70-6
Furfuryl Mercaptan, 97% 98-02-2
4-Methoxybenzenethiol, 98% 696-63-9
6-Dimethylaminopurine 938-55-6
2-Amino-4,6-Dichloropyrimidine, Tech. 56-05-3
2,4-Dihydroxy-n-(2-Hydroxyethyl)benzamide, 99% (TLC) 24207-41-8
Brucine dihydrate, 99% 145428-94-0



HBCChem,Inc

Chemical Information Net Copyright Reserved